进水氨氮浓度对静置/好氧/缺氧SBR脱氮除磷性能的影响

在4个序批式反应器(SBR)R1、R2、R3和R4中,以静置段代替传统厌氧段,采用后置缺氧,考察进水氨氮浓度分别为20,30,40,50mg/L对静置/好氧/缺氧SBR脱氮除磷性能的影响.结果表明,R1、R2、R3和R4长期运行中磷去除率分别为82.3%、92.8%、92.6%和89.1%,总氮(TN)去除率分别为97.2%、88.6%、84.5%和72.6%.静置段省却搅拌,但仍起厌氧段作用,仍可实现生物强化除磷.4个反应器好氧段均发生同步硝化-反硝化(SND),分别贡献14.7%、16.6%、17.8%和14.8%的进水后TN量,且后置缺氧段利用糖原驱动反硝化,脱氮效果较好,出水TN分别为0.57,4.43,6.61,13.70mg/L.研究表明,进水氨氮浓度可影响静置释磷、好氧摄磷、反硝化除磷.静置段代替厌氧段的后置缺氧工艺可取得较好脱氮除磷效果,且节约成本,简化工艺.     

基于AHP-GCE的固体火箭发动机水射流清理系统安全评价

针对固体火箭发动机水射流清理系统中诸多危险因素所呈现出的复杂性和不确定性,根据水射流清理固体推进剂装药的作业流程,利用层次分析法建立了其安全评价的指标体系,进而采用灰色综合评价法对固体火箭发动机水射流清理系统进行了安全评价。评价结果表明,固体火箭发动机水射流清理系统的综合评价值为31126,处于较高危险状况,需要对其中的危险因素加强防控;水射流清理平台的综合评价值为32417,高于整体综合评价值,因而需要在风险防控中予以着重关注;评价结果与实际情况吻合良好。     

Ligand-less in situ surfactant-based solid phase extraction for preconcentration of silver from natural water samples prior to its determination by atomic absorption spectroscopy

A simple and rapid ligand-less in situ surfactant-based solid phase extraction method for preconcentration of silver from water samples is developed. In this method, a cationic surfactant containing a proper alkyl group (n-dodecyltrimethylammonium bromide) is dissolved in the aqueous sample and then a proper ion-pairing agent (ClO₄^?) is added. Due to the interaction between surfactant and ion-pairing agent, solid particles are formed and used for adsorption of silver carbonate. After centrifugation, the sediment is dissolved in 2.0 mL 1 M HNO₃ in ethanol and then aspirated directly into the flame atomic absorption spectrometer. Variables affecting the extraction efficiencies such as pH, concentrations of surfactant and CO₃^2?, ion pair concentration, and extraction time, are optimized. Under such conditions, the calibration curve is linear from 3 to 700 μg L^?1. Detection limit is 1.1 μg L^?1 with an enrichment factor of 37. The relative standard deviation for eight replicate measurements of 100 μg L^?1 is 2.1%. The method has been applied for the determination of silver in water samples.     

Preconcentration of samarium with modified yeast cells for its determination by atomic emission spectroscopy

A chelating-modified biosorbent is produced by coupling of a dye, procion red, to yeast cells. The resulting modified cells have been characterized by Fourier transform infrared, elemental analysis and thermogravimetric analysis and studied for preconcentration and determination of trace Sm(III). The optimum pH value for sorption of the samarium ions is 6.2. The sorption capacity of functionalized modified yeast cells is 7.2 mg g^?1. Recovery was 99% when Sm(III) was eluted with an aqueous solution of 0.1 mol L^?1 ethylenediaminetetraacetic acid. Scatchard analysis suggested that binding sites were homogeneous. The equilibrium data were analyzed using Langmuir, Freundlich, Temkin, and Redlich–Peterson isotherm models, and the respective constants were determined as 1.0 (L mg^?1), 2.9 [(mg g^?1) (L mg^?1)^1/n], 2.4 × 10⁸ (L g^?1), and 30 (dm³ g^?1) at 20 °C. The method was applied for an Sm(III)-containing sample of ceramic industry effluent.     

Synthesis and in vitro biological evaluation of 3, 4-annelated coumarin-pyrimido-pyrimidine systems

3,4-Annelated coumarin-pyrimido-pyrimidine systems (7-imino-8-mercapto-7H-5-oxa-7a,9,12-triaza-benzo[a]anthracen-6-one 2 and 8-hydroxy-7-imino-10-methyl-7H-5-oxa-7a,9,12-triaza-benzo[a]anthracen-6-one 3) were synthesized by the action of 4-amino-2-mercapto-pyrimidine, 2-amino-4-hydroxy-6-methylpyrimidine, respectively, on 4-chlorocoumarin-3-carbonitrile 1. The synthesized compounds were examined for in vitro antibacterial activity against 4 bacterial cultures: Staphylococcus aureus, Streptococcus pneumonia, Escherichia coli, and Aeromonas Salmonicida. The antibacterial activity of synthesized compounds 2 and 3 was compared to antibacterial activity of novobiocin as a standard drug.     

Green synthesis and characterization of metal ions-mixed titania for application in dye-sensitized solar cells

Abstract

The objective of the present study is to synthesize various metal ions mixed TiO₂ nanoparticles using a continuous hydrothermal synthesis pilot reactor for dye-sensitized solar cells (DSCs). In the pilot plant, aqueous solutions of the metal salts are mixed with a flow of supercritical water (450?°C and 24.1?MPa) in a confined jet mixer for continuous synthesis of metal ions-mixed nano-titania. Characterization of the particles was made using Brunauer–Emmett–Teller technique for specific surface area, powder X-ray diffraction analysis and transmission electron microscopy for identification and crystallite size, X-ray photoelectron spectroscopy for surface analysis and infrared spectroscopy for distinct group identification. Following the already existing procedures and using the titanates synthesized, dye-sensitized cells of 1?cm² area were assembled and their photovoltaic parameters were evaluated under standard test conditions. The power conversion efficiencies (η %) for 40?mol % Zn²⁺, 5?mol % Zr⁴⁺ and 10?mol % Zn⁴⁺ titania were obtained to be 4.8, 4.95 and 4.9, respectively. The promising efficiency results from a greener and large-scale production of nano-titania is a step forward towards commercializing DSC technology.     

Gas chromatography with atomic absorption detection for the determination of alkyl selenide compounds in the breath of mice after administration of different selenium compounds

Quantitative determination of dimethylselenide and dimethyldiselenide in the breath of mice after addition of different selenium compounds to the drinking water is described. Breath samples are collected with a cryogenic trap and analyzed by gas chromatography with atomic absorption spectrometric detection. Detection limits down to 0.2 ng/100 g body weight are obtained.

The pulmonary excretion of selenium metabolites after oral administration via drinking water or after intraperitoneal injection appears to be negligible. The bioconversion of the different selenium species is discussed.     

Removal of textile dyes from aqueous solution using PEG based aqueous biphasic system

Aqueous biphasic systems (ABSs) composed of polyethylene glycol (PEG) and salt have been examined for the removal of textile dyes from textile effluent. The partitioning of four dyes namely Cibacron Scarlet LS 2G, Rhodamine B, Brown ERN and Astacryl Red 3B was investigated. All the dyes studied were found to partition into the upper PEG rich layer. Sodium carbonate was found to be the most efficient salt for extraction of dyes. Sodium sulphate was found to be marginally less efficient. Sodium chloride did not cause partitioning at all. Partitioning occurred at all pH and was almost pH independent. The partitioning of these dyes in larger volume (100?mL) ABS was also demonstrated. Studies using dye bath effluent were also conducted. In all cases very high efficiencies consistently above 98% were obtained.     

Solid phase extraction of trace metals from environmental samples using Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone and determination by inductively coupled plasma–atomic emission spectrometry

A method for the solid phase extraction of trace metals, namely Co, Cu, Pb, Ni and Zn, from environmental and biological samples using column Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone (HPPPTSC) and determination by inductively coupled spectrometry (ICP–AES) has been developed. The reagent has the capacity to form chelate complexes with the metals because of three binding sites in the reagent molecule. The optimum experimental conditions for the quantitative sorption of five metals, pH, effect of flow rate, concentration of eluent, sorption capacity and the effect of diverse ions on the preconcentration of analytes have been investigated. The sorption capacity of the resin has 83, 127, 35, 88 and 85?µmol?g^?1 for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺, respectively. The preconcentration factors for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺ were 100, 110, 120, 140 and 150, respectively. The accuracy of the proposed procedure was evaluated by standard reference materials. The achieved results were in good agreement with certified values. The proposed method was applied for the determination of trace metals in river water and plant leaves.     

Study of atrazine degradation in soil from Kenyan sugarcane-cultivated fields in controlled laboratory conditions

A study to compare the extent of atrazine mineralization in soils from Kenyan sugarcane-cultivated fields with and without history of atrazine use was carried out in the laboratory under controlled conditions. The study was testing the hypothesis that repeated atrazine application to soil will not result in enhanced atrazine mineralization. The study was carried out with ¹⁴C-uniformly ring-labeled atrazine in a laboratory under controlled conditions. Atrazine mineralization to ¹⁴CO₂ in soil with no history of atrazine use was negligible (0.16%) after 163 days of soil incubation. The three metabolites hydroxyatrazine, desisopropylatrazine, and desethylatrazine in the proportion of 17.7%, 1.3%, and 2.6%, respectively, were in the soil after 75 days. In the soil from the sugarcane-cultivated field with history of atrazine use, atrazine mineralization was 89.9% after 98 days. The same soil, amended with mature compost, showed a lag phase of eight days before rapid atrazine mineralization was observed.