聚硅酸锌铝的制备及其性能研究

以硅酸钠、硫酸锌、硫酸铝为原料,通过共聚法制备了无机高分子絮凝剂聚硅酸锌铝（PSZAS）,研究了Na₂SiO₃的摩尔浓度、活化时间、Al/Si、Zn/Si 配比及絮凝剂的投加量对絮凝效果的影响,用X-射线衍射（XRD）和电子扫描电镜（SEM）对该絮凝剂的结构及形貌进行了表征。结果表明：当硅酸钠的浓度为0.4 mol/L,硅酸活化时间为2 h,Si∶Al∶Zn=1∶1∶1.5,絮凝剂投加量为20 mL/L废水时,絮凝剂的电中和能力和吸附架桥能力最强,絮凝剂对含H-酸染料模拟废水的絮凝效果最好。     

厌氧序批式反应器内挥发性脂肪酸积累特性研究

小试规模的厌氧序批式反应器（ASBR）,通过人工配水,研究了启动3个月时间以及一个运行周期内反应器内挥发性脂肪酸（VFA）的积累情况,并通过分析期间产甲烷活性的变化说明了控制VFA积累的重要性。经过近120 d的运行,乙酸和丙酸的最大比产甲烷活性分别提高了1.8和2.2倍,说明反应器的启动过程即是微生物群落的优化和选择的过程,ASBR的抗冲击的能力较强说明随启动的进行和种群的优化,活性污泥凝聚性能增强,对VFA的降解能力增强。     

One laptop per child,local refurbishment or overseas donations? Sustainability assessment of computer supply scenarios for schools in Colombia

With the intention of bridging the ‘digital divide’ many programmes have been launched to provide computers for educational institutions, ranging from refurbishing second hand computers to delivering low cost new computers. The fast and economical provision of large quantities of equipment is one of the many challenges faced by such programmes. If an increase is to be achieved in the sustainability of computer supplies for schools, not only must equipment be provided, but also suitable training and maintenance delivered. Furthermore, appropriate recycling has to be ensured, so that end-of-life equipment can be dealt with properly. This study has evaluated the suitability of three computer supply scenarios to schools in Colombia: (i) ‘Colombian refurbishment’, -refurbishment of computers donated in Colombia, (ii) ‘Overseas refurbishment’, -import of computers which were donated and refurbished abroad, and (iii) ‘XO Laptop’, -purchase of low cost computers manufactured in Korea. The methods applied were: Material Flow Assessment, -to assess the quantities-, Life Cycle Assessment, -to assess the environmental impacts, and the application of the Multiple Attribute Utility Theory, -to analyse, evaluate and compare different scenarios. The most sustainable solution proved to be the local refurbishment of second hand computers of Colombian origin to an appropriate technical standard. The environmental impacts of such practices need to be evaluated carefully, as second hand appliances have to be maintained, require spare parts and sometimes use more energy than newer equipment. Providing schools with second hand computers from overseas and through programmes such as ‘One Laptop Per Child’ has the disadvantage that the potential for social improvements – such as creation of jobs and local industry involvement – is very low.     

用电解锰阳极泥和含SO_2工业尾气制备硫酸锰

以电解锰阳极泥与电解锌生产中产生的含SO_2尾气为原料,经过反应、浸出、浸出液两次净化和浓缩结晶制备硫酸锰,考察了反应时间、含SO_2尾气的流量及反应温度对Mn~(4+)转化率的影响.实验结果表明:在反应时间45 min、反应温度20～30 ℃、含SO_2尾气流量16 L/min的条件下,Mn~(4+)转化率达90%以上;尾气中SO_2利用率随尾气流量增加而降低;所得MnSO_4·H_2O产品质量达到GB1622-86<工业级硫酸锰标准>.     

Experimental study of recycling lightweight concrete with aggregates containing expanded glass

The focus is on the issue of waste management when constructing and recycling lightweight concrete (LWC) with aggregates containing expanded glass. The paper analyses the recycling of concrete from lightweight aggregates, and on the important issue of environmental and waste management. The characteristics of recycling LWC such as density, compressive strength and thermal conductivity are investigated, and compared with normal existing concrete from lightweight aggregates. The results indicate that it is possible to recycle lightweight concrete construction waste. The described method shows great possibilities for increasing the use of construction waste materials from LWC containing expanded glass, in order to benefit from better use of the available capacity from existing construction waste. The characteristics of density, compressive strength and thermal conductivity from the new recycled material were compared with normal existing concrete from lightweight aggregates, such as changes in dependency on the type and parts of waste as well as its new binding components. Thus, a new recycled material has been created with new characteristics of density, compressive strength and thermal conductivity, which is conform to the compressive strength class and rules on heat protection and energy efficiency use in buildings (SI OJ RS No. 42/2002). Laboratory density, compressive strength, and thermal conductivity tests results showed that LWC can be produced by the use of waste LWC with aggregates containing expanded glass. However, the use of waste LWC with aggregates containing expanded glass seems to be necessary for the production of cheaper and environmentally friendly LWC.     

拒绝服务攻击/分布式拒绝服务攻击防范技术的研究

研究常见的拒绝服务攻击和分布式拒绝服务攻击方法,深入分析各种相关防护技术,提出了从设备自身加固入手,以分布式检查,管理和技术双管齐下的思路。给出了应对这种目前开放网络中的顽疾的综合解决方案。笔者提及的相关解决方案涉及到安全评估加固技术、攻击检测技术、流量清洗技术、安全管理技术;也给出了各种不同职责岗位的工作职责,提出了防止拒绝服务攻击必须从做好安全加固,采用积极的方式应对这种攻击的思路。笔者提出的观点可用于指导企业进行综合的拒绝服务攻击防御,也可以作为安全技术及理论的研究者的参考,提到的各种防范技术均经过了实践的验证。     

可靠性理论在公共安全领域的应用研究

对公共安全体系从系统可靠性的视角,综合运用可靠性方面的知识,构建公共安全系统混联模型;进而将可靠性分配理论与故障树分析方法相结合,根据系统安全目标的要求,确定混联系统的第一层次各单元事件的可靠性目标值,对构成各单元的各个下属单元采取最小工作量可靠度分配方法,从而建立系统中各单元可靠度再分配量化模型。通过建筑物火灾引起人员伤亡事故实例,详述系统各单元可靠性分配的计算过程。研究表明,可靠性理论可以成功地应用到公共安全领域;使系统在给定的目标值条件下达到系统的安全性优化,实现了公共安全保障效能,减小灾害损失。     

AHP-SWOT法在道路交通安全改善策略中的应用

针对交通事故的特点,探讨AHP-SWOT方法在道路交通事故评价中的具体应用。SWOT(优势—劣势,机会—威胁)分析法是一种综合考虑系统外部环境和内部条件的各种因素,对其进行系统评价并从中选择最佳策略的方法,但是它缺少定量分析的过程。AHP(层次分析法)具有定性分析和定量分析相结合的优势,采用SWOT和AHP相结合的方法进行评价更加合理和准确。将AHP-SWOT方法应用于道路交通安全评价系统,分析道路交通安全系统所面临的机会和威胁、所处的优势和劣势,可为正确评价道路安全水平、制定合理的道路交通安全改善策略提供理论指导。实例证明该方法可行有效。     

区域性煤矿百万吨死亡率指标的宏观预测研究

为了对煤矿安全状况进行宏观预测,提出区域性煤矿安全状况评价指标体系并建立了以煤矿百万吨死亡率指标标征区域性煤矿安全状况的灰色预测模型。在对煤矿综合机械化采煤率、大型煤矿产量比例、原煤全员效率指标预测分析的基础上,利用多元回归法综合预测煤矿百万吨死亡率指标。实例计算证明:建立的预测模型具有输入数据少、建模简单、计算快捷等优点;客观地反映出区域性的煤矿安全状况;该模型可进行煤矿安全的短期预测,并为制定煤矿安全控制指标提供理论依据。     

汽车气制动ABS调节阀测试系统气动测试回路设计研究

针对气制动防抱死制动系统(ABS)调节阀测试系统气动回路设计进行研究;根据我国的汽车生产和检测现状,在确定气动测试回路总体方案的基础上,进行主控部分、负载回路、控制回路的设计和计算,所设计的气路检测系统可用于测试8种典型的气制动元件的密封性及动静态特性,通过不同的组合能够满足每一种阀的测试需求。该气动测试回路有效解决了简单阀类测量方法的不足,满足不了生产率及测量精度要求的问题。