烟气脱硫喷淋塔的容积负荷与本体设计

提出了以喷淋塔的容积负荷——平均容积吸收率为控制指标的本体设计路线。在目前已有的设计、运行经验基础上，根据烟气的SO2进口浓度、要求的吸收效率等来确定喷淋塔容积。讨论了容积吸收率不同角度的定义，给出了采用容积吸收率进行喷淋塔本体设计的步骤。     

ENHANCING FECAL COLIFORM TOTAL MAXIMUM DAILY LOAD MODELS THROUGH BACTERIAL SOURCE TRACKING1

ABSTRACT: Surface water impairment by fecal coliform bacteria is a water quality issue of national scope and importance. In Virginia, more than 400 stream and river segments are on the Commonwealth's 2002 303(d) list because of fecal coliform impairment. Total maximum daily loads (TMDLs) will be developed for most of these listed streams and rivers. Information regarding the major fecal coliform sources that impair surface water quality would enhance the development of effective watershed models and improve TMDLs. Bacterial source tracking (BST) is a recently developed technology for identifying the sources of fecal coliform bacteria and it may be helpful in generating improved TMDLs. Bacterial source tracking was performed, watershed models were developed, and TMDLs were prepared for three streams (Accotink Creek, Christians Creek, and Blacks Run) on Virginia's 303(d) list of impaired waters. Quality assurance of the BST work suggests that these data adequately describe the bacteria sources that are impairing these streams. Initial comparison of simulated bacterial sources with the observed BST data indicated that the fecal coliform sources were represented inaccurately in the initial model simulation. Revised model simulations (based on BST data) appeared to provide a better representation of the sources of fecal coliform bacteria in these three streams. The coupled approach of incorporating BST data into the fecal coliform transport model appears to reduce model uncertainty and should result in an improved TMDL.     

某型机车牵引电机传动端轴承低速轻载无飞溅润滑试验研究

主要根据客户要求,在低速(1 km/h)及轻载工况下,测量传动端轴承无飞溅润滑条件下的温升等参数,而进行相关的电机试验,为某型机车牵引电机传动端轴承在低速及轻载工况下,无飞溅润滑提供试验验证及技术支撑。     

Targeted Application of Seasonal Load Duration Curves Using Multivariate Analysis in Two Watersheds Flowing Into Lake Houston1

Teague, Aarin, Philip B. Bedient, and Birnur Guven, 2011. Targeted Application of Seasonal Load Duration Curves Using Multivariate Analysis in Two Watersheds Flowing Into Lake Houston. Journal of the American Water Resources Association (JAWRA) 47(3):620‐634. DOI: 10.1111/j.1752‐1688.2011.00529.x Abstract: Water quality is a problem in Lake Houston, the primary source of drinking water for the City of Houston, Texas, due to pollutant loads coming from the influent watersheds, including Spring Creek and Cypress Creek. Statistical analysis of the historic water quality data was developed to understand the source characterization and seasonality of the watershed. Multivariate analysis including principal component, cluster, and discriminant analysis provided a custom seasonal assessment of the watersheds so that loading curves may be targeted for season specific pollutant source characterization. The load duration curves have been analyzed using data collected by the U.S. Geologic Survey with corresponding City of Houston water quality data at the sites to characterize the behavior of the pollutant sources and watersheds. Custom seasons were determined for Spring Creek and Cypress Creek watersheds and pollutant source characterization compared between the seasons and watersheds.     

How effective are River Basin Management Plans in reaching the nutrient load reduction targets?

Riverine nutrient loads are among the major causes of eutrophication of the Baltic Sea. This study applied the Soil & Water Assessment Tool (SWAT) in three catchments flowing to the Baltic Sea, namely Vantaanjoki (Finland), Fyrisån (Sweden), and Słupia (Poland), to simulate the effectiveness of nutrient control measures included in the EU’s Water Framework Directive River Basin Management Plans (RBMPs). Moreover, we identified similar, coastal, middle-sized catchments to which conclusions from this study could be applicable. The first modelling scenario based on extrapolation of the existing trends affected the modelled nutrient loads by less than 5%. In the second scenario, measures included in RBMPs showed variable effectiveness, ranging from negligible for Słupia to 28% total P load reduction in Vantaanjoki. Adding spatially targeted measures to RBMPs (third scenario) would considerably improve their effectiveness in all three catchments for both total N and P, suggesting a need to adopt targeting more widely in the Baltic Sea countries.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01393-x) contains supplementary material, which is available to authorized users.     

采用颜色空间表征ANAMMOX启动与冲击过程

厌氧氨氧化(ANAMMOX)是一种高效、节能的脱氮技术,但是其启动过程和稳定状态的表征目前仍缺乏一个简单易行的方法.针对这一问题,在水质分析的基础上,采用颜色空间重点监测ANAMMOX启动过程中污泥的颜色变化,并借助高通量测序技术对微生物菌群的种类和数量等进行分析.结果表明:(1)根据水质特征,整个启动过程可分为活性迟滞期、活性增强期、负荷提高期、稳定运行期.与此同时,HSV、CIELAB颜色空间的指标,整体上呈现先降低后升高的趋势,然后保持稳定.污泥颜色的变化与水质的变化以及分子生物学特征中优势菌群的变迁一致,因此,三者之间具有相关性,进而表明,采用颜色空间可对ANAMMOX启动过程进行准确表征;(2)当遇到高负荷引起的冲击时,H、S、a~*、b~*、C_(ab)~*等指标与总无机氮(TIN)容积去除速率均呈现降低的趋势,而H_(ab)出现了突升,但均能准确反映出系统的冲击特性.提出了基于颜色空间表征ANAMMOX启动各阶段的方法并建立了一套冲击过程指标体系,为颜色空间在ANAMMOX系统中的应用提供了理论基础.     

Assessment of the maximum allowed acid deposition load at current stage in China

Soil acidification caused by acid deposition has been significant in some forests in southern China. We present an approach for assessing the current stage maximum allowed load (SML) of acid deposition for terrestrial system in the country. The main idea was that soil base cation exchange as a finite buffer to acidity was included in the soil acidity mass balance calculation at current acidification stage. We calculated the SML for five forests in southern China. The usual critical loads for the same forests were also calculated by the steady state mass balance model for comparison. The results showed that the SML is a more tolerant limit than the critical load for the forests with soils not acidified seriously at current stage. However, the SML become a more stringent limit to acid deposition when the forest soils have acidified seriously to very low base cation saturation. In this case the SML assessment is beneficial for the soils recovering from a serious acidified state. Based on a national scale database, the SML mapping for non-agricultural soil system in China was carried out.     

小城镇产业集群主要污染源筛查与影响分析

以郫县安德镇川菜产业园为研究对象,采用等标污染负荷法对污染影响进行了标准化评价。结果发现:川菜产业园主要的工业污染行业为豆制品加工行业,排污量为2 919.94 t/a,占总排污量的96.46%,等标污染负荷为9.83,占总污染负荷的92.83%,其中有6家企业为主要控制对象。对比分析发现,环境污染受企业规模、末端处理方式、废水排放量等多方面因素共同影响。所有污染因子中,BOD对环境的实质污染影响较大。该研究成果将为优化小城镇产业集群的规划、管理和污染物总量控制提供有价值的参考。     

进水有机负荷对三级生物滴滤池脱氮除磷的影响

试验采用三级(好氧/兼氧/好氧)多层组合填料生物滴滤池处理模拟生活污水,探索强化脱氮除磷工艺。考察了在相同水力负荷和布水周期下,改变进水有机负荷对COD、NH_4~+-N、TN和TP去除率的影响,并用扫描电镜和X射线衍射(XRD)对填料进行辅助分析。研究结果表明,三级串联生物滴滤池的组合相比传统的单级或两级生物滴滤池反应器处理效果更好。第1级和第2级生物滴滤池去除COD、NH_4~+-N和TN效果较好,贡献率合计分别为93.0%、91.2%和91.4%。第1级和第3级生物滴滤池除磷效果较好,贡献率合计91.4%。有机负荷为0.328~0.392 kg/(m~3·d)时,系统总体去除效果最好。     

亚热带流域氮磷排放与养殖业环境承载力实例研究

畜禽养殖业粪便排放已经成为我国农村地区主要的农业面源污染源之一,也是制约养殖业良性发展的主要瓶颈.本文以湖南省长沙县典型亚热带流域为研究单元,基于流域水环境定位观测、耕地氮(N)磷(P)消纳能力以及养殖业调查和土壤分析资料,初步分析了亚热带丘陵区的面源污染现状及畜禽养殖业的环境承载力.结果表明,研究区金井河流域134.4 km2范围内N、P年负荷分别为N 2.72 t·km-2和P0.11t·km-2,其中养殖粪便对水体总氮(TN)、总磷(TP)负荷的贡献率分别约为42.2％和62.0％.区内平均畜禽养殖密度为3.46 AU·hm-2(相当于流域内年出栏生猪24.39万头),显著高于现有化肥用量条件下流域的实际承载力1.13 AU·hm-2(相当于流域内年出栏生猪6.35万头),因此养殖密度过高是导致研究区水体NP负荷较高的主要原因.区内N、P盈余量分别为N 35.8 kg·hm-2、P 18.61 kg·hm-2.研究区基本不施用化肥条件下畜禽养殖业的最大环境承载力为7.26 AU·hm-2,在有机肥占合理施肥量30％条件下,当地畜禽养殖业的环境承载力为2.74AU·hm-2(相当于流域内年出栏生猪19.50万头).降低养殖密度、调整养殖业空间布局以及提高养殖废弃物的资源化利用率是防治当前面源污染的有效途径.