三维电极法处理含钴、锰废水

采用三维电极法对工业精对苯二甲酸(PTA)装置产生的含钴、锰废水进行处理.通过与传统二维电极法的处理效果进行比较,论证了三维电极法脱除Co2+,Mn2+的优越性.探究了填料类型、极板间电压、粒子电极填充比(粒子电极质量(g)与废水体积(mL)的比)、极板间距等工艺参数对Co2+,Mn2+脱除率的影响.实验结果表明,适宜...     

活性炭三维电极流化床处理洗车废水的研究

以经吸附处理的活性炭为填充粒子,对三维电极流化床反应器处理洗车废水进行了静态条件实验研究。结果表明：三维电极流化床处理洗车废水的效果明显好于三维电极固定床和单纯的活性炭吸附。在槽电压为30 V,通气量为3 L/min, 通电时间为30 min,活性炭用量为50 g时,COD去除率最高。     

基于虚拟现实技术的喷射火事故三维动态仿真及应用

基于Shell模型的原理和计算方法,把喷射火焰视为近似倒立圆台形,构建了不同风向影响下的喷射火三维模型,运用虚拟现实技术和三维可视化技术对喷射火事故进行模拟与仿真。以Delphi和OpenGL/GLScene为开发工具,实现了喷射火三维模型的程序化与三维场景绘制,同时引入粒子特效系统,实现了喷射火焰燃烧的实时动态仿真,完成了喷射火三维动态可视化软件系统的开发。最后,利用该系统进行实例分析。应用表明:虚拟现实技术与事故后果模拟相结合,使整个系统实现实时性和形象性的统一,虚拟现实技术在化工行业具有广泛应用前景,也为事故后果预测评估提供科学依据。     

复杂地形机械湍流扩散的粒子随机行走模拟

应用粒子随机行走模拟方法模拟了高架点源在中性情况下在复杂地形上的排放,并将模拟结果与风洞实验进行了比较,二者能较好地吻合。虽然将该方法用于复杂地形大气扩散计算在技术上不存在什么困难,但是在确定模式基本参数等方面,还应该慎重考虑。      

灾后复杂地形区域的测量测绘模型设计

灾后地形变化复杂,基于单一线性模型的测量测绘方法,测量灾区坡度陡、高差大等复杂地形时,无法有效拟合复杂地形趋势、获取高程点精度差,导致测量精确度较低。设计一种用于灾后复杂地形区域的测量测绘模型,在外部DEM辅助下精化灾区地形DEM,对灾区遥感InSAR影像进行干涉定标,实现干涉影像与外部DEM的精准对应;将多模型的线性回归策略与灾后复杂地形趋势相拟合,对解缠干涉影像图中全部影像快,通过多模型的线性回归,逐个像素精确的去除相位解缠中多余相位,过滤无价值高程点,得到有效灾区地形高程图,从中采集精确地灾后复杂地形区域高程点。实验结果表明,该模型可提高灾后复杂地形区域绘图精确度,对总体灾区地形InSAR影像测量效率高,测量的平均高程误差为±6.2cm,比单一线性模型低±3.77cm。     

复杂地形对含硫气井应急计划区划分的影响

研究复杂地形对含硫气井应急计划区(EPZ)划分的影响,为高风险油气田的安全生产提供参考。根据含硫气井井口与周边地形的关系,将复杂地形分为3类;选择不同类型复杂地形的3口含硫气井,采用大涡模拟方法模拟不同H2S释放速率、不同风速和风向、不同井喷点火时间的组合条件下H2S大气扩散质量浓度场,积分计算各井H2S毒性负荷的时空分布。在此基础上,研究EPZ半径与H2S释放速率之间的关系,然后建立以H2S释放速率为指标的不同类型复杂地形含硫气井EPZ的划分方法。结果表明第一类模型计算结果明显大于第二类和第三类模型,第三类模型的计算结果最小,此差异随着H2S释放速率增大而愈显著。计算结果合理,方法适用且可行。     

A spatially explicit empirical model of structural development processes in natural forests based on climate and topography

Stand structure develops with stand age. Old-growth forests with well-developed stand structure support many species. However, development rates of stand structure likely vary with climate and topography. We modeled structural development of 4 key stand variables and a composite old-growth index as functions of climatic and topographic covariates. We used a hierarchical Bayesian method for analysis of extensive snap-shot National Forest Inventory (NFI) data in Japan (n = 9244) to account for differences in stand age. Development rates of structural variables and the old-growth index exhibited curvilinear responses to environmental covariates. Flat sites were characterized by high rates of structural development. Approximately 150 years were generally required to attain high values (approximately 0.8) of the old-growth index. However, the predicted age to achieve specific values varied depending on environmental conditions. Spatial predictions highlighted regional variation in potential structural development rates. For example, sometimes there were differences of >100 years among sites, even in the same catchment, in attainment of a medium index value (0.5) after timber harvesting. The NFI data suggested that natural forests, especially old natural forests (>150 years), remain generally on unproductive ridges, steep slopes, or areas with low temperature and deep snow, where many structural variables show slow development rates. We suggest that maintenance and restoration of old natural forests on flat sites should be prioritized for conservation due to the likely rapid development of stand structure, although remaining natural forests on low-productivity sites are still important and should be protected.     

A study of the atmospheric dispersion of a high release of krypton-85 above a complex coastal terrain, comparison with the predictions of Gaussian models (Briggs, Doury, ADMS4)

Atmospheric releases of krypton-85, from the nuclear fuel reprocessing plant at the AREVA NC facility at La Hague (France), were used to test Gaussian models of dispersion. In 2001-2002, the French Institute for Radiological Protection and Nuclear Safety (IRSN) studied the atmospheric dispersion of 15 releases, using krypton-85 as a tracer for plumes emitted from two 100-m-high stacks. Krypton-85 is a chemically inert radionuclide. Krypton-85 air concentration measurements were performed on the ground in the downwind direction, at distances between 0.36 and 3.3 km from the release, by neutral or slightly unstable atmospheric conditions. The standard deviation for the horizontal dispersion of the plume and the Atmospheric Transfer Coefficient (ATC) were determined from these measurements. The experimental results were compared with calculations using first generation (Doury, Briggs) and second generation (ADMS 4.0) Gaussian models. The ADMS 4.0 model was used in two configurations; one takes account of the effect of the built-up area, and the other the effect of the roughness of the surface on the plume dispersion. Only the Briggs model correctly reproduced the measured values for the width of the plume, whereas the ADMS 4.0 model overestimated it and the Doury model underestimated it. The agreement of the models with measured values of the ATC varied according to distance from the release point. For distances less than 2 km from the release point, the ADMS 4.0 model achieved the best agreement between model and measurement; beyond this distance, the best agreement was achieved by the Briggs and Doury models.     

城市绿地生态综合评价研究进展

以"四川省地震灾后置建社会满意度调查"数据为依据,通过因子分析,找到影响社会满意度的关键因素,确立低碳模式为灾后和谐社会建设的最佳模式.通过对低碳社会的特征分析,结合社会学理论,认为:低碳社会的发展是低碳价值理念、低碳准则、低碳行为互相作用的过程.低碳社会模式的发展路径是基于综合集成与统筹优选的方法,从价值理念、低碳行为、规范体系三个方面对低碳社会的各项要素进行集成:低碳社会的推行模式分为低碳农村模式和低碳城市模式.低碳农村可以与灾区社会主义新农村建设同步进行,发展生态经济,探索生态发展模式和生态补偿政策;低碳城市相对于一般社会发展模式和农村发展模式,更集中体现在建筑、交通、文化、消费行为等某些特定领域.建议:从国家到灾区的各级政府必须多管齐下,从制度创新入手,实施一系列相互配套、切实有效的对策及措施,如转变单纯追求GDP的政策目标,制定法律法规,促进新能源开发,建立低碳技术支撑体系等来保障低碳社会模式的推行.     

复极性三维电极法处理硝基苯废水的实验研究

以铁板为阴极,石墨为阳极,吸附饱和的活性炭粒子为填充材料,研究了复极性三维电极法处理硝基苯废水时各因素对处理效率的影响。通过单因素实验确定了复极性三维电极法处理硝基苯废水的最佳操作条件为：电解电压20V,反应时间60min,活性炭填充量25g／L,电极板间距4cm,废水初始pH值6～7,电解质的投加量0．8g／L。此条件下废水的硝基苯去除率达到80％以上,COD去除率达到50％以上,显示出良好的处理效果。