微量营养物质对有机废水厌氧消化过程的调控作用

通过向处理酸性葡萄酒蒸馏废水的厌氧移动床生物膜反应器中投加微量营养物质的试验,得出利用微量营养物质调控厌氧消化过程在技术上是可行的。Fe、Ni、Co组合不仅能加快挥发性有机酸(VFA),特别是丙酸的降解速率,进而提高厌氧反应器的溶解COD去除率,同时,还有利于厌氧反应器有机负荷的快速提升和较强pH缓冲能力的形成。B族维生素对厌氧移动床生物膜反应器运行效果影响不大。Fe对厌氧移动床生物膜反应器运行有一定影响,但效果也不十分明显。     

AF+BAF深度处理PCB生产废水的试验研究

针对PCB废水难降解及含重金属铜的特点,在经过一系列的物化处理的基础上,采用AF+BAF组合工艺对其进行深度处理。试验研究中,通过控制污水在反应器中的停留时间,使得废水在AF中水解酸化,以增加废水的可生化性,在此基础上利用BAF的生物膜来去除污水中剩余的有机物。试验结果表明,试验系统对PCB废水中的COD、Cu2+去除效果良好,出水COD、Cu2+的含量分别稳定在10~50mg/L和0.02~0.1mg/L,达到排放标准。     

镧、铈对厌氧颗粒污泥产甲烷的Hormesis效应及其动力学研究

间歇培养条件下研究了单一稀土元素镧(La3 )和铈(Ce3 )在不同浓度水平下对厌氧颗粒污泥活性及其动力学行为的影响.结果表明,La3 和Ce3 对厌氧颗粒污泥比产甲烷活性有促进作用的浓度范围均为0.01～0.1 mg·L-1,促进作用浓度峰值均为0.05mg·L-1,最大促进百分比分别为10.35%和20.79%;La3 和Ce3 对SMA(比甲烷活性)的半抑制浓度分别为5mg·L-1和1000mg·L-1,La3 较易对污泥产生抑制作用.米-门方程可以用来描述厌氧消化过程中甲烷发酵阶段的动力学行为,稀土元素La3 和Ce3 投加至反应系统后,提高了甲烷发酵过程的动力学常数Vmax和半饱和常数Ks.     

循环流化床锅炉床温控制方法

就目前电厂循环流化床锅炉运行中存在的床温波动问题，讨论了导致床温波动的因素，并针对性地提出了控制床温的一些措施。     

气浮--厌氧--生物接触氧化工艺处理屠宰废水

介绍了采用气浮-厌氧-生物接触氧化工艺处理屠宰废水的工程实例。当进水CODcr≤4500mg／L时，出水可达到国家《肉类加工工业污染物排放标准》(GB13457—1992)一级标准。     

Occurence and Distribution of Polycyclic Aromatic Hydrocarbons in Ankara Precipitation

Urban atmospheric environment contains many trace organic pollutants that are related to the incomplete fuel combustion in domestic heating, industrial plants and automobile traffic. Removal of these pollutants from the atmosphere takes place through wet and dry deposition as well as chemical transformations. In this study, concentrations of polycyclic aromatic hydrocarbons (PAHs) in wet deposition samples were determined at an urban site of Turkey. Wet and dry deposition samples were collected using Andersen Rain Sampler. The sampler was modified accordingly for the collection of organic pollutants. Collected samples were preconcentrated by using solid phase extraction (SPE) disks and consecutively analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). Among the 13 compounds quantified in this study, anthracene, fluoranthene, and pyrene were found more frequently and at elevated concentrations (202, 271 and 260 ng L^-1 mean concentrations, respectively).Concentrations of PAHs were found to be high in winter period.     

Effect of Cross-Linking Waste Protein with Dialdehydes on Its Biodegradation Under Anaerobic Conditions

Most native polymers used in processing and application technologies are admittedly disposable from the environment in a biologic manner, but products possess low mechanical strength. One of the paths to increasing this attribute (if feasible) is their cross-linking, which may, however, affect their readiness to biodegradation. In the presented work this condition was observed on the example of waste protein (Hykol B) cross-linking by means of glutardialdehyde and glyoxal. Degree and course of cross-linking were determined through impedance spectroscopy. The objective of this work also was to obtain data for constructing a sensor capable of following the cross-linking course in real time, for potential industrial application of Hykol in continuous production. Impedance spectroscopy proved to be applicable even to this kind of material marked by considerable water content and exhibiting relatively high electric conductivity; so far it had been used only for materials of low conductivity. An aqueous environment inoculated with digested anaerobic sludge from a municipal wastewater treatment plant was selected for modeling anaerobic conditions. The relation was studied between cross-linking degree given by content of cross-linking agent (determined by impedance spectroscopy) and biodegradation degree under anaerobic conditions. It was confirmed that network density as given by quantity of added agent not only reduced breakdown degree but also slowed the course of the process. This fact is particularly obvious with cross-linking by means of glyoxal; network density is thus dependent on type of employed substance, which affect type and structure of created network. That not merely forms an obstacle during polymer swelling and dissolution but also prevents access of bacteria to source of metabolized organic carbon.     

安庆石化热电厂正压浓相气力输灰系统

详细介绍了安庆石化热电厂正压浓相气力输灰系统的组成、特点及运行情况。该系统自投运以来，运行情况良好。     

事故前期发展过程浅析

任何事故发生之前都有一段发展演变的过程.当失误不断积累,超过系统或组织自身的自适应能力以后,一旦激发事件出现,就有可能导致事故的发生.本文在分析事故致灾条件的基础上,将其前期发展过程分为了7个阶段,得出了事故前期发展过程流程图.     

抽出式通风煤巷掘进过程中粉尘浓度分布规律的数值模拟

根据气固两相流理论，针对矿井掘进工作面的特点，采用计算流体力学的离散相模型（DPM）对掘进工作面通风过程中粉尘浓度进行数值模拟，总结抽出式通风掘进巷道中粉尘浓度的沿程分布及变化规律。