同源地人工湖水体和底泥中有机物组成及有机结构的分析研究

采用XAD-8大孔吸附树脂对水体和底泥中的有机物进行组分分离,并通过傅里叶变换红外光谱(FTIR)、紫外-可见光谱(UV-Vis)和三维荧光光谱(3DEEMs)对自然水体和底泥中的疏水酸(腐殖酸、富里酸)、疏水碱、疏水中性物质和亲水物质进行表征和对比.结果表明,水体中有机物含量:亲水物质富里酸腐殖酸疏水碱疏水中性物质,底泥中有机物的含量为:腐殖酸富里酸亲水物质疏水碱疏水中性物质.根据红外、紫外、三维荧光光谱可知底泥中有机物的芳香程度、不饱和程度及分子量大小略高于水体有机物.根据荧光指数(FI)和自生源指标(BIX)可知,底泥和水体的腐殖酸和富里酸主要来源于陆生动植物和土壤有机质,而其余物质主要源于细菌和藻类活动.     

电子束辐照降解水中氯霉素的研究

本研究对氯霉素(CAP)在不同条件下的电子束辐照降解进行了研究.结果表明,电子束辐照可有效去除水中CAP,低浓度CAP在酸性条件下的辐照降解更为显著,且降解过程符合准一级动力学模型.通过添加不同的自由基清除剂,发现HO·在CAP降解中起关键作用,此外,CAP分子也会吸收辐照而发生分解.水中共存的阴离子和腐殖酸(HA)对CAP辐照降解均有抑制作用,这跟其与HO·的反应速率常数大小有关,并且反应速率越大,其抑制能力越强.CAP在去离子水中的去除率高于其他实际水体,但辐照剂量为4 k Gy时,污水厂污水过滤水和胶体浓缩液中的CAP也可分别去除89.1%和81.7%.利用GC-MS检测到辐照后溶液中有6种中间产物,主要是通过脱水、不对称中心断键和脱酰胺作用形成.此外,IC检测有Cl-、NO-3和NO-2的产生,并且TOC在一定程度上降低,说明部分CAP被矿化.     

紫外光谱结合正交试验设计同时测定水中苯系物

利用正交试验设计,以光谱预处理、特征筛选及多元校正方法为考察因素,每个因素的4种不同方法为水平,确定了水中3种苯系物（苯酚、苯胺及苯甲酸）紫外光谱数据的最佳分析方法,从而建立了其定量校正模型。对于苯酚、苯胺及苯甲酸,其光谱预处理、特征筛选及多元校正分别采用一阶导数+无信息变量消除法（UVE）+偏最小二乘回归（PLSR）,Savitzky-Golay平滑+变量结合种群分析法（VCPA）+PLSR,Savitzky-Golay平滑+移动窗口偏最小二乘法（MWPLS）+PLSR。在独立测试集上3组分的预测误差均方根（RMSEP）分别为0.809 4、0.796 3和0.945 4。水样加标回收实验的回收率为97.79%~103.84%,相对标准偏差（RSD）小于3%。该方法可作为一种同时测定水中苯系物的简便有效方法。     

A new photoproduct of the drug furosemide in aqueous media

The solar phototransformation of furosemide has been investigated in aqueous media. Irradiation of the drug in distilled water, in water and humic acids or nitrate ions, and in sewage sludge water affords a new dehalogenated dimer. The formation of the dimer has been explained by the formation of a cation radical intermediate. The low-measured environmental concentration of furosemide with respect to predicted environmental concentration in the Po and Lambro Rivers could be justified by its phototransformation.     

山东潍坊紫外线辐射特征及影响因素

近10多年来,随着人类居住环境的恶化,紫外线给人类造成了巨大的伤害。利用潍坊市气象台2004~2006年逐日紫外线观测资料,分析了太阳紫外线辐射到达地面的强度指数和等级,同时分析了这些量的年、月、日变化特征,研究了影响紫外线辐射的主要的几种因子。影响紫外线辐射强度的主要因素是臭氧、地表反射率、大气气溶胶和云,这些影响因素的变化对太阳紫外线到达地面的辐射起着举足轻重的作用。     

PRODUCTION PROCESSES UNDER THE ICE IN LAKE ST. CLAIR: 1. IRRADIATION AND TEMPERATURE1

ABSTRACT: Data from three ice-covered stations in Lake St. Clair were collected to evaluate the effect of ice and related variables on phytoplankton production. Primary production, phytoplankton standing crop, irradiation and temperature were measured from January to April, 1973. Mean production values ranged from 0.74 mgC/m³/h at station 1 near Mitchell Bay to 3.4 mgC/m³/h in waters at stations 2 and 3 below the Thames River mouth. A similar pattern was observed in chlorophyll a concentration, the mean values ranged from 0.63 μg/1 at station 1 to 2.1 and 1.3 μg/1 at stations 2 and 3. Temperature stratification occurred at the three stations. However, the temperatures at station 1 were consistently more than a degree warmer than at the other two stations. Irradiation was low, having a mean value at the sampling depth of .075 ly/min. The data is interpreted to indicate that the ice-bound phytoplankton were adapted to the low irradiation. It is suggested that the variation observed between stations is related to the formation of a plume by the Thames River and differences in nutrient loads carried by the St. Clair and Thames Rivers.     

Synthesis, crystal structure, photodegradation kinetics and photocatalytic activity of novel photocatalyst ZnBiYO4

ZnBiYO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiYO₄ were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis diffuse reflectance. ZnBiYO₄ crystallized with a tetragonal spinel structure with space group I41/A. The lattice parameters for ZnBiYO₄ were a = b = 11.176479 Å and c= 10.014323 Å. The band gap of ZnBiYO₄ was estimated to be 1.58 eV. The photocatalytic activity of ZnBiYO₄ was assessed by photodegradation of methyl orange under visible light irradiation. The results showed that ZnBiYO₄ had higher catalytic activity compared with N-doped TiO₂ under the same experimental conditions using visible light irradiation. The photocatalytic degradation of methyl orange with ZnBiYO₄ or N-doped TiO₂ as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01575 and 0.00416 min^-1 for ZnBiYO₄ and N-doped TiO₂, respectively. After visible light irradiation for 220 min with ZnBiYO₄ as catalyst, complete removal and mineralization of methyl orange were observed. The reduction of total organic carbon, formation of inorganic products, SO₄^2- and NO₃^-, and evolution of CO₂ revealed the continuous mineralization of methyl orange during the photocatalytic process. The intermediate products were identified using liquid chromatography- mass spectrometry. The ZnBiYO₄/(visible light) photocatalysis system was found to be suitable for textile industry wastewater treatment and could be used to solve other environmental chemical pollution problems.     

Analysis of trace dicyandiamide in stream water using solid phase extraction and liquid chromatography UV spectrometry

An improved method for trace level quantification of dicyandiamide in stream water has been developed. This method includes sample pretreatment using solid phase extraction. The extraction procedure (including loading, washing, and eluting) used a flow rate of 1.0 mL/min, and dicyandiamide was eluted with 20 mL of a methanol/acetonitrile mixture (V/V = 2:3), followed by pre-concentration using nitrogen evaporation and analysis with high performance liquid chromatography–ultraviolet spectroscopy (HPLC–UV). Sample extraction was carried out using a Waters Sep-Pak AC-2 Cartridge (with activated carbon). Separation was achieved on a ZIC^®-Hydrophilic Interaction Liquid Chromatography (ZIC-HILIC) (50 mm × 2.1 mm, 3.5 μm) chromatography column and quantification was accomplished based on UV absorbance. A reliable linear relationship was obtained for the calibration curve using standard solutions (R² > 0.999). Recoveries for dicyandiamide ranged from 84.6% to 96.8%, and the relative standard deviations (RSDs, n = 3) were below 6.1% with a detection limit of 5.0 ng/mL for stream water samples.     

高能重离子辐照下国产RPV钢A508-3的硬化行为

目的 研究在563 K的温度条件下,高能重离子辐照导致国产RPV钢A508-3的硬化行为。方法 使用回旋加速器提供的352.8 MeV Fe²¹⁺对A508-3钢试样进行辐照,使其依次达到0.15、0.30、1.50 dpa的损伤水平。借助辐照终端的梯度减能装置,在样品表面至25 μm的深度范围内产生一个准均匀分布的原子离位损伤坪区,并使用纳米压痕仪和维氏显微硬度计测量了试样的硬度。结果 考虑到压痕尺寸效应的影响,采用Nix-Gao模型对硬度数据进行拟合,由于高能Fe离子产生了较厚的损伤区,辐照试样中的软基效应明显减弱。辐照后的试样出现明显的硬化现象,且随着辐照剂量的增大,硬化增量有饱和趋势。通过辐照前和辐照至0.15 dpa试样的微硬度数据,得出其与纳米硬度之间的线性关系(Hv0=0.85 H0)。结论 借助A508-3辐照前后的硬度数据,计算发现试样的屈服强度增量与辐照剂量之间存在一种幂函数关系,这为A508-3钢中子-离子辐照硬化的映射关系研究提供了基础数据。     

小冲杆试验测定重离子辐照A508-3钢的硬化和脆化

目的采用小冲杆测试方法测量高能重离子辐照反应堆压力容器A508-3钢的辐照硬化和脆化特性,为工况条件下反应堆压力容器寿命预测提供实验依据。方法采用兰州重离子加速器提供的高能C^(6+)离子通过减能装置在290℃条件下开展A508-3钢辐照实验,并在样品表面形成一定厚度、准均匀分布的离位损伤层。通过开展不同辐照剂量辐照样品的小冲杆测试,得到不同辐照剂量A508-3钢的小冲杆载荷-位移曲线。通过对小冲杆测试得到的载荷-位移曲线的分析,测定不同辐照剂量样品的辐照硬化和脆化特性。结果压力容器A508-3钢辐照样品的硬化和脆化随着辐照剂量的增加逐渐增强,0.15 dpa以前呈线性增长,而后缓慢增大,约0.2 dpa时达到饱和趋势。结论通过小冲杆测试可以得到离子辐照样品的硬化和脆化行为,A508-3钢辐照硬化和脆化行为具有一致的变化趋势。