光助Fenton反应催化剂Fe/Al2O3的制备及其对六氯苯的催化活性研究

采用超声促进浸渍法制备了光助Fenton催化剂Fe/Al2O3,利用该催化剂对六氯苯（HCB）进行光助Fenton氧化降解,考察了浸渍液浓度、浸渍温度、灼烧温度和灼烧时间等制备条件对其催化降解六氯苯的活性的影响,确定了制备Fe/Al2O3的工艺条件,并对制得的催化剂进行表征。结果表明,超声促进浸渍法制备非均相光助Fenton反应催化剂Fe/Al2O3的最佳工艺条件为：浸渍液浓度25mmol/L,浸渍温度40℃,焙烧温度500℃,焙烧时间3h。在此条件下制备的催化剂对六氯苯的降解具有较高的催化活性。     

光化学氧化法处理垃圾渗滤液影响因素的研究

以光化学氧化法处理垃圾渗滤液为研究对象,对不同光反应器、H2O2的投加方式、渗滤液曝气、不同光源以及原水初始COD浓度等影响因素进行了探讨,实验结果表明：旋转式反应器对COD去除效果最高,降膜反应器虽效率略差,但结构简单,光源无污染,易于在工程中使用;H2O2一次性投加更有利于COD的去除;在合适时间段采取曝气方式可提高紫外光氧化反应速度;紫外灯光对COD去除较好,而太阳光对COD去除稍差,可能耗低、成本低,在污染物治理时有广阔的应用前景;COD去除效率随原水初始COD浓度的增加而增加。     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.     

Effects of sterilization treatments on the analysis of TOC in water samples

Decomposition experiments conducted with and without microbial processes are commonly used to study the effects of environmental microorganisms on the degradation of organic pollutants.However,the effects of biological pretreatment (sterilization) on organic matter often have a negative impact on such experiments.Based on the principle of water total organic carbon (TOC) analysis,the effects of physical sterilization treatments on determination of TOC and other water quality parameters were investigated.The results revealed that two conventional physical sterilization treatments,autoclaving and 60 Co γ-radiation sterilization,led to the direct decomposition of some organic pollutants,resulting in remarkable errors in the analysis of TOC in water samples.Furthermore,the extent of the errors varied with the intensity and the duration of sterilization treatments.Accordingly,a novel sterilization method for water samples,0.45 μm micro-filtration coupled with ultraviolet radiation (MCUR),was developed in the present study.The results indicated that the MCUR method was capable of exerting a high bactericidal effect on the water sample while significantly decreasing the negative impact on the analysis of TOC and other water quality parameters.Before and after sterilization treatments,the relative errors of TOC determination could be controlled to lower than 3% for water samples with different categories and concentrations of organic pollutants by using MCUR.     

星用热缩套管力学性能钴源辐照效应研究

目的研究星用热缩套管的力学性能(断裂伸长率和拉伸强度)在空间辐射环境中的退化情况。方法利用钴源放射的γ射线模拟地球轨道粒子辐照环境,通过表面形貌分析、辐解气体分析、X射线光电子能谱分析、红外光谱分析等多种手段分析热缩套管力学性能退化的原因。结果辐照后热缩套管颜色变深,力学参数出现严重退化现象。在最大辐照剂量下,材料断裂伸长率由414.3%下降为0.06%,拉伸强度由17.43 MPa下降为2.15 MPa,热缩套管原有力学性能几乎完全丧失。结论热缩套管主链出现断链现象,生成可挥发的CO2,CH4等气体,从而导致样品力学性能严重退化。     

超声波预处理-生物降解复合工艺处理含油污泥

以超声辐照和生物降解复合工艺处理油田含油污泥,辐照30 min后,连续曝气4 h的污泥中COD去除率比未经辐照的污泥COD去除率增幅85.7%,除油率增幅为66.7%;超声辐照强度对含油污泥处理效果影响较大,输出电压从50 V增至250 V时,COD去除率从10%增至70%,除油率则先增加后降低,在200 V左右时除油率最高达60%。     

云对太阳紫外辐射的影响

云对到达地面的太阳紫外辐射有着重要的影响,根据在香河综合观测站１年的观测资料,利用相关分析,得到了计算云天条件下太阳紫外总辐射的一种经验公式,计算结果比较令人满意。对阴天太阳紫外总辐射的减弱作了简单的分析。     

超声辐照去除焦化废水中的氨氮

采用超声辐照去除焦化废水中的氨氮,在废水初始pH为8～9、氨氮初始质量浓度为121mg／L、饱和气体同时曝气同时超声的作用方式下对氨氮去除效果最佳。通过测定自由基清除剂对氨氮去除过程的影响和氨氮的转化形态,提出了超声去除氨氮的作用机理可能是溶液中的氨分子进入空化泡内进行高温热解反应最终转化成氮气和氢气的过程。     

有机磷农药降解菌的紫外诱变育种

有机磷农药降解菌地衣芽孢杆菌（ Ｂａｃｉｌｌｕｓｌｉｃｈｅｎｉｆｏｒｍｉｓ） 经紫外线诱变后,筛选出突变菌株Ｐ１２ ．在θ＝３０℃,溶解氧ρ（Ｏ２） ＝２ ．５ ｍｇ Ｌ－１ 的培养条件下,３ ｄ 内对甲胺磷的降解率为８０ ．１％ ,比出发菌株提高了将近１０％的降解率．农药斜面连续传代１０ 次,降解活力保持稳定．     

还原铁粉/紫外光体系对活性艳红X-3B溶液的脱色

研究了在紫外杀菌灯（λmax=253．7nm,30W）照射下,添加还原铁粉的活性艳红X－3B水溶液的脱色作用。当pH=3．5,铁粉投加量为2．0g／L时,20mg／L活性艳红X－3B溶液在光照180min后的脱色率为79％。脱色为动力学零级反应。染料溶液的pH、铁粉投加量、活性艳红初始浓度对脱色有影响。初步探讨了脱色反应的机理。