Preparation and characterization of visible-light-active nitrogen-doped TiO2 photocatalyst

A visible-light photocatalyst was prepared by calcination of the hydrolysis product of Ti(SO4)2 with ammonia as precipitator. The color of this photocatalyst was vivid yellow. It could absorb light under 550 nm wavelength. The crystal structure of anatase was characterized by XRD. The structure analysis result of X-ray fluorescence(XRF) shows that doped-nitrogen was presented in the sample. The photocatalytic activities were evaluated using methyl orange and phenol as model pollutants. The photocatalytic activities of samples were increasing gradually with calcination temperature from 400℃ to 700℃ under UV irradiation. It can be seen that the degradation of methyl orange follows zero-order kinetics. However, the calcination temperatures have no significant influence on the degradation of phenol under sunlight. The N-doped catalyst shows higher activity than the bare one under solar irradiation.     

超声去除垃圾渗滤液中的氨氮

采用超声辐照技术去除垃圾渗滤液中的氨氮.研究结果表明,超声辐照对垃圾渗滤液中的氨氮有很好的去除效果.渗滤液中氨氮超声去除的机理主要是氨氮以游离氨的形式在空化泡内发生高温热解反应,生成氮气和氢气而排出.     

Comparative study of the oxidation of atrazine and acetone by H2O2/UV, Fe(III)/UV, Fe(iii)/H2O2/UV and Fe(II) or Fe(III)/H2O2

In this study, the rates of degradation of organic compounds by several AOPs (H₂O₂/UV, Fe(III)/UV, Fe(III)/H₂O₂/UV, Fe(II)/H₂O₂ and Fe(III)/H₂O₂) have been compared. Experiments were carried out at pH ≈ 3 (perchloric acid / sodium perchlorate solutions) and with UV reactors equipped with a low-pressure mercury vapour lamp (emission at 253.7 run). The data obtained with atrazine ([Atrazine]_o = 100 μg/L) showed that the rate of degradation of atrazine in very dilute aqueous solution is much more rapid with Fe(III)/UV than with H₂O₂/UV. Photo-Fenton process (Fe(III)/H₂O₂/UV) was found to be more efficient than H₂O₂/UV and Fe(II)/H₂O₂ for the mineralization of acetone ([Acetone]_o = 1 mM).     

光助Fenton反应催化剂Fe/Al2O3的制备及其对六氯苯的催化活性研究

采用超声促进浸渍法制备了光助Fenton催化剂Fe/Al2O3,利用该催化剂对六氯苯（HCB）进行光助Fenton氧化降解,考察了浸渍液浓度、浸渍温度、灼烧温度和灼烧时间等制备条件对其催化降解六氯苯的活性的影响,确定了制备Fe/Al2O3的工艺条件,并对制得的催化剂进行表征。结果表明,超声促进浸渍法制备非均相光助Fenton反应催化剂Fe/Al2O3的最佳工艺条件为：浸渍液浓度25mmol/L,浸渍温度40℃,焙烧温度500℃,焙烧时间3h。在此条件下制备的催化剂对六氯苯的降解具有较高的催化活性。     

交联壳聚糖-CdS颗粒可见光催化脱色甲基橙研究

利用壳聚糖对金属离子的配位络合作用和吸附性能,模拟生物矿化仿生制备交联壳聚糖/CdS复合粒子。以甲基橙为处理对象,氙灯模拟可见光,研究了该复合材料对甲基橙的降解脱色性能。用Langmuir-Hinshelwood方程从动力学的角度,考察了不同催化剂浓度、甲基橙的初始浓度、反应体系的pH值、外加无机阴离子等对甲基橙降解脱色的影响。结果表明,该复合材料的吸附性能和光催化活性产生的协同作用能较有效促进甲基橙染料的脱色,在低质量浓度条件下可见光催化过程为假一级反应。光催化剂的最佳用量为1.5g/L,甲基橙降解的最佳pH为4.0。Cl-和Br-均对MO的光催化脱色起抑制作用,而NO3-的添加明显促进MO的光催化速率。     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.     

多源数据支持下城市火灾风险评估及规划响应

为探析城市火灾风险的空间格局特征,提出科学的火灾防控体系,以合肥市为研究对象,基于火灾风险兴趣点(POI)数据、NPP/VIIRS夜间灯光影像数据、消防站与道路信息等多源数据,运用SAVEE模型和迭代方程评估城市火灾风险,并引入区位-配置(L-A)模型,从不同目标情境优化消防站点布局。研究表明:火灾高风险区主要集中于合肥市二环以内的建成区,尤其是老城区、合肥西站片区、政务区、科学城和东部新中心等区域;现有48座消防站对研究区内的POI覆盖效果较好,覆盖率为86.76%,而对NPP/VIIRS覆盖效果一般,覆盖率仅为55.94%,覆盖率在合肥市东北部、西北部和南部部分地区仍有不足;基于最大化覆盖模型,规划新增44座消防站,明显提升5 min响应时间的覆盖率,可进一步夯实城市消防安全。     

星用热缩套管力学性能钴源辐照效应研究

目的研究星用热缩套管的力学性能(断裂伸长率和拉伸强度)在空间辐射环境中的退化情况。方法利用钴源放射的γ射线模拟地球轨道粒子辐照环境,通过表面形貌分析、辐解气体分析、X射线光电子能谱分析、红外光谱分析等多种手段分析热缩套管力学性能退化的原因。结果辐照后热缩套管颜色变深,力学参数出现严重退化现象。在最大辐照剂量下,材料断裂伸长率由414.3%下降为0.06%,拉伸强度由17.43 MPa下降为2.15 MPa,热缩套管原有力学性能几乎完全丧失。结论热缩套管主链出现断链现象,生成可挥发的CO2,CH4等气体,从而导致样品力学性能严重退化。     

超声波预处理-生物降解复合工艺处理含油污泥

以超声辐照和生物降解复合工艺处理油田含油污泥,辐照30 min后,连续曝气4 h的污泥中COD去除率比未经辐照的污泥COD去除率增幅85.7%,除油率增幅为66.7%;超声辐照强度对含油污泥处理效果影响较大,输出电压从50 V增至250 V时,COD去除率从10%增至70%,除油率则先增加后降低,在200 V左右时除油率最高达60%。     

空气和废气中甲醛测定全程质量控制

质量控制是环境监测质量管理的重点和难点,加强全程质量控制才能确保监测数据的准确性和可靠性。结合环境监测工作实际,应用国标经典分析方法一乙酰丙酮分光光度法（GB／T15516—1995）对空气和废气中甲醛测定进行了全程质量控制技术探讨。概述了方法原理,简介了方法所需仪器与试剂,深入探讨了运用国标法进行空气和废气中甲醛测定全程质量控制技术问题。指出在标准分析方法基础上,选用有效期内的质量合格的分析纯以上试剂,正确进行样品测定预处理,严格规范样品显色、冷却与比色方式,准确进行分析结果数据处理,切实加强结果填报规定程式,能够确保大批量、成分复杂未知气样甲醛测定精密度和准确度。