Development of analytical methods for polycyclic aromatic hydrocarbons （PAHs） in airborne particulates： A review

In the present work, the different sample collection, pretreatment and analytical methods for polycyclic aromatic hydrocarbons （PAHs） in airborne particulates is systematacially reviewed, and the applications of these pretreatment and analytical methods for PAHs are compared in detail. Some comments on the future expectation are also presented.     

城市污染河道沉积物AVS与重金属生物毒性研究

采集珠江三角洲典型城市污染河道佛山水道表层沉积物和上覆水样品,测定了沉积物AVS,Eh,SEM_Pb,SEM_Cd,SEM_Cu,SEM_Zn,SEM_Ni,SEM_Cr,及上覆水Eh,DO.同步进行了底栖动物调查,结合调查结果分析了城市污染河道沉积物AVS与重金属生物毒性的关系.主要研究SEM-AVS判据在判断城市重污染河道重金属生物有效性方面的作用.所测AVS最大值为69.579 μmol/g,最小值为0.339 μmol/g,均值为20.283 μmol/g;各采样站位∑SEM₅（SEM_Pb,SEM_Cd,SEM_Cu,SEM_Zn,SEM_Ni之和）最大值为23.067 μmol/g,最小值为1.062 μmol/g;底栖动物种类和数量均较少,且基本为耐污种,优势种为水丝蚓.13个采样站位中,∑SEM₅-AVS<0的有9个,MDS分析结果显示：这9个站位中的7个底栖动物群落结构相似程度高.这表明重污染河道沉积物重金属的生物毒性与SEM-AVS的值关系密切,SEM-AVS判据在判断重污染区域重金属的生物毒性方面具有较大作用;同时说明重污染河流重金属生物毒性比较复杂,不能完全由SEM-AVS解释.     

青岛近海沉积物中多环芳烃、多氯联苯和有机氯农药的含量和分布特征

利用气相色谱/质谱方法对青岛近海表层沉积物中多环芳烃(PAHs)、多氯联苯(PCBs)和有机氯农药(OCPs)进行了测定,并分析了PAHs、PCBs和OCPs的分布特征.结果表明,PAHs、PCBs和OCPs的均值分别为684.80、6.87和13.52ng·g-1,含量变化均呈近岸高、远岸低的分布规律.燃料的高温燃烧排放对本研究海域沉积物中PAHs有较大贡献;PCBs主要来源于工业及生活排放,但已受到控制;沉积物中HCHs存在工业和农业双重污染源输入,DDT主要是由于历史上使用农药造成,且在表层沉积物中受到好氧微生物降解.与国内外同类研究结果相比,调查海域沉积物中PAHs、PCBs和OCPs的污染程度及生态风险均处于较低水平.     

TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.     

Petroleum hydrocarbon concentrations in eight mollusc species along Tamilnadu coast, Bay of Bengal, India

Eight mollusc species and sediment samples collected from three different stations along Tamilnadu coast, Bay of Bengal, India were analysed for the levels of petroleum hydrocarbons to elucidate the status of the petroleum residues in mollusc meant for human consumption. The concentrations of petroleum hydrocarbons in sediments along Tamilnadu coast varied from 5.04–25.5 g/g dw (dry weight). High concentration of petroleum hydrocarbons in the sediment of Uppanar estuary (25.5 1.45 g/g dw) was perhaps land and marine based anthropogenic sources of this region. The petroleum hydrocarbon residues in eight mollusc species collected from Uppanar, Vellar and Coleroon estuaries varied between 2.44–6.04 g/g ww (wet weight). Although the concentration of petroleum hydrocarbons in sediment of the Uppanar region was markedly higher than the background, the petroleum hydrocarbon residues in mollusc collected from Uppanar estuary did not suggest bioaccumulation. The results signified that industrial growth has affected the aquatic environments and regular monitoring will help to adopt stringent pollution control measures for better management of the aquatic region.     

Sedimentary record of polycyclic aromatic hydrocarbons in Lake Erhai, Southwest China

The temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in a sediment core from Lake Erhal in Southwest China using gas-chromatography/mass spectrometry (GC/MS) method.The total organic carbon (TOC) normalized total PAHs concentrations (sum of US Environmental Protection Agency proposed 16 priority PAHs) ranged from 31.9 to 269 μg/g dry weight (dw),and were characterized by a slowly increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments.The PAHs in the sediments were dominated by low molecular weight (LMW) PAHs,suggesting that the primary source of PAHs was low- and moderate temperature combustion processes.However,both the significant increase in high molecular weight (HMW) PAHs in the upper sediments and the vertical profile of diagnostic ratios pointed out a change in the sources of PAHs from low-temperature combustion to high-temperature combustion.The ecotoxicological assessment based on consensus-based sediment quality guidelines implied that potential adverse biological impacts were possible for benzo(ghi)perylenelene and most LMW PAHs.In addition,the total BaP equivalent quotient of seven carcinogenic polycyclic aromatic hydrocarbons (BaA,CHr,BbF,BkF,BaP,DBA and INP) was 106.1 ng/g,according to the toxic equivalency factors.Although there was no great biological impact associated with the HMW PAlls,great attention should be paid to these PAH components based on their rapid increase in the upper sediments.     

低温等离子体-催化协同降解挥发性有机废气

低温等离子体-催化协同技术适合于各类挥发性有机物的治理,特别是大气量低浓度的有机废气的处理.高效催化剂的加入可 以显著提高等离子体反应中有机废气的降解效率,减少有害副产物的生成以及提高反应器的能量利用率.从反应器、催化剂以及背景气体等方面探讨了该技术实现产业化需要解决的问题,结合低温等离子体与催化剂的相互作用、等离子体...     

广州大气挥发性有机物的臭氧生成潜势及来源研究

2008年秋季在广州城区及其下风向沿海乡村地区采用活性炭吸附管采集大气挥发性有机化合物(VOC),应用二次热解吸-GC/MS联用技术测量56种VOC的大气浓度,研究在典型海陆风条件下VOC的组成特征和日变化规律,并采用臭氧最大增量及OH自由基反应活性两种方法估算了该地区各VOC的臭氧生成潜力,探讨了VOC优先控制物种及...     

大气痕量挥发性有机物碳同位素分析研究进展

对于大气痕量挥发性有机物的研究,浓度测量方法在满足科学研究的要求方面尚有欠缺,相比之下,同位素测量方法具有测量精度高、对源解析准确和测量误差小的特点且发展迅速,该方法在大气痕量挥发性有机物的研究中所起到的作用日益显著;但由于同位素测量技术对大气样品质量的要求很高,故目前该方法在大气环境科学的研究领域中还不能普及,今后随...     

挥发性有机废气治理技术进展

主要介绍了目前国内外有机废气（VOCs）治理的常用方法以及这些方法的原理和工艺流程,并对它们的特点进行了简单介绍。