Utilising the Synergy between Plants and Rhizosphere Microorganisms to Enhance Breakdown of Organic Pollutants in the Environment (15 pp)

Background Phytoremediation is a promising technology for the cleanup of polluted environments. The technology has so far been used mainly to remove toxic heavy metals from contaminated soil, but there is a growing interest in broadening its applications to remove/degrade organic pollutants in the environment. Both plants and soil microorganisms have certain limitations with respect to their individual abilities to remove/breakdown organic compounds. A synergistic action by both rhizosphere microorganisms that leads to increased availability of hydrophobic compounds, and plants that leads to their removal and/or degradation, may overcome many of the limitations, and thus provide a useful basis for enhancing remediation of contaminated environments.Main Features The review of literature presented in this article provides an insight to the nature of plant-microbial interactions in the rhizosphere, with a focus on those processes that are relevant to the breakdown and/or removal of organic pollutants. Due consideration has been given to identify opportunities for utilising the plant-microbial synergy in the rhizosphere to enhance remediation of contaminated environments.Results and Discussion The literature review has highlighted the existence of a synergistic interaction between plants and microbial communities in the rhizosphere. This interaction benefits both microorganisms through provision of nutrients by root exudates, and plants through enhanced nutrient uptake and reduced toxicity of soil contaminants. The ability of the plant-microbial interaction to tackle some of the most recalcitrant organic chemicals is of particular interest with regard to enhancing and extending the scope of remediation technologies.Conclusions Plant-microbial interactions in the rhizosphere offer very useful means for remediating environments contaminated with recalcitrant organic compounds.Outlook A better knowledge of plant-microbial interactions will provide a basis for improving the efficacy of biological remediations. Further research is, however, needed to investigate different feedback mechanisms that select and regulate microbial activity in the rhizosphere.     

Mathematical modeling of biofiltration in activated pine-bark charge of a biofilter

Aim, Scope and Background Human economic activities cause emissions of various pollutants of an organic nature: butanol, butyl acetate, methanol, formaldehyde, phenol, benzene, toluene, xylene, etc. These compounds are emitted to atmosphere by various enterprises of food, chemistry, wood processing industries, from transportation means, agricultural enterprises, etc. Therefore, when purifying air from these pollutants, it is necessary to apply efficient and inexpensive air purification methods. In this dimension, the biological air purification is chosen from all possible air cleaning methods. An experimental biofilter with the activated charge of pine bark was developed at the Department of Environment Protection of the Vilnius Gediminas Technical University. In the course of the experimental investigation, it was determined that this air purification method is efficient. Filter efficiency, when purifying air of volatile organic compounds (butanol, butyl acetate and xylene), to a great extent, depending on the nature and concentrations (up to 100 mg/m3) of pollutants injected, might go up to 70-98%. The mathematical model of the biofilter was developed based on the research results and fully taking into consideration physical, chemical, and biological processes going on during its operations. Main Features The aim of this article is to determine biodegradation constant , absorption capacity , and half empiric expressions of filter efficiency. Knowing this, it is possible to find out the dependence of the filter efficiency on the operational parameters of the filter (i.e. on the concentrations and the height of biocharge of the initial pollutants (butanol, butyl acetate, xylene) fed through it). Conclusions With the help of mathematical modeling, the biodegradation constants and absorption capability of volatile organic compounds (butanol, butyl acetate, and xylene) fed into the biofilter charged with the activated pine bark and used for the cleaning of volatile organic compounds, as well as the efficiency of the biofilter in half empiric expression, have been established. It has been discovered that the constant of pollutant biodegradation is a value inverse to the time during which the amount of pollutants in the filter becomes times higher. It is rather complicated to carry out theoretical calculation of the biodegradation constant at a molecular level, therefore this constant has been established based on the results obtained in the course of research. The equations describing pollutant dynamics in the filter charge and the air cleaning processes going on in it have been derived from diffusion equations in a mobile medium. The modeling helped to find out the absorption capacity of the examined pollutants, which by its numeric value is equal to the volume unit of the absorbed gas amount. The latter factor, the same as the biodegradation constant, was determined basing on the experimental results. Mathematical modeling brought a range of formulas expressing dependences of each pollutant's efficiency on its initial concentrations and filter charge height. Recommendation /Outlook. Based on the experimental data, a mathematical model has been developed which will allow the measuring of the filter efficiency not only with regard to the absorption and biodegradation of the pollutants under examination, but also with regard to other pollutants and their compounds, etc., having an impact on the filter performance. The results of the mathematical modeling have revealed that the modeling of processes going on in the filter is much simpler than isthe performance of long and costly experiments. The developed mathematical model makes it possible to measure the filter efficiency at the present moment.     

Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

Natural attenuation/phytoremediation in the vadose zone of a former industrial sludge basin

The natural attenuation of polyaromatic hydrocarbons (PAHs) in the vadose zone of a naturally revegetated former industrial sludge basin (0.45 ha) was examined. This was accomplished by comparing the concentration of 16 PAH contaminants present in sludge collected below the root zone of plants with contaminants present at 3 shallower depths within the root zone. Chemical analysis of 240 samples from 60 cores showed the average concentration of total and individual PAHs in the 0-30 cm, 30-60 cm, and bottom of the root zone strata were approximately 10, 20, and 50%, respectively, of the 16, 800 ppm average total PAH concentration in deep non-rooted sludge. Statistically significant differences in average PAH concentrations were observed between each strata studied and the non-rooted sludge except for the concentrations of acenaphthene and chrysene present at the bottom of the root zone in comparison to sludge values. The rooting depth of the vegetation growing in the basin was dependent on both vegetation type and plant age. Average rooting depths for trees, forbs (herbaceous non-grasses), and grasses were 90, 60, and 50 cm, respectively. The deepest root systems observed (100-120 cm) were associated with the oldest (12-14 year-old) mulberry trees. Examination of root systems and PAH concentrations at numerous locations and depths within the basin indicated that plant roots and their microbially active rhizospheres fostered PAH disappearance; including water insoluble, low volatility compounds, i.e. benzo(a)pyrene and benzo(ghi)perylene. The reduced concentration of PAHs in the upper strata of this revegetated former sludge basin indicated that natural attenuation had occurred. This observation supports the concept that through appropriate planting and management practices (phytoremediation) it will be possible to accelerate, maximize, and sustain natural processes, whereby even the most recalcitrant PAH contaminants (i.e. benzo(a)pyrene) can be remediated over time.     

利用复合酵母菌系统处理含油污泥

利用筛选得到的10株酵母菌组成复合酵母菌系统，并将该复合菌系统接种到泥浆反应器中对模拟油泥样品进行了处理。在对反应器进行优化的基础上，比较了复合酵母菌体系和经驯化的活性污泥体系对模拟风化油泥的处理效果，发现复合酵母菌在反应速度和油去除率上都优于活性污泥。利用GC—MS对复合酵母菌处理体亲中主要脂肪烃组分的变化进行了分析，结果表明原油组分中脂肪烃部分在处理8d后基本被完全降解。     

Polycyclic aromatic hydrocarbons in crude oil-contaminated soil: A two-step method for the isolation and characterization of PAHs

A two-step analytical method is developed for the isolation and characterization of polycyclic aromatic hydrocarbons (PAHs) in crude oil contaminated soil. In the first step, those crude oil components were isolated which are easily mobilized with water from the contaminated soil (determination of groundwater pollution potential). In the second step, the fraction containing the remaining crude oil compounds was extracted using toluene. After the cleanup of the fractions, both fractions were analyzed using high-performance liquid chromatography (HPLC). The HPLC of the toluene extracted fraction shows that along with the sixteen priority pollutants from the US-EPA list, many other polycyclic aromatic hydrocarbons (PAHs) are present as well. It is evident from the chromatograms that a significant amount of PAHs are present as is also the case in the fractions eluted by water. The described method allows the determination of total organic pollutants from crude oil, some of them being potential groundwater contaminants. The major part of the total pollutants could not be mobilized by water and therefore remains in the soil, which was extracted in the second step.     

Stable chlorine intramolecular kinetic isotope effects from the abiotic dehydrochlorination of DDT

INTENTION, GOAL, SCOPE, BACKGROUND: Identifying different sources and following reaction pathways of chlorinated organic contaminants in the environment can be challenging, especially when only their concentrations are available. Compound-specific stable chlorine measurements of some contaminants have recently been shown to provide additional information and an increased understanding of their biogeochemistry. These studies, however, have been generally limited to volatile molecules. OBJECTIVE: Here, the stable chlorine isotope ratios of the semi-volatile pesticide, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) were investigated. Specifically, the intramolecular stable chlorine isotopic compositions of DDT and the kinetic isotope effect (KIE) for the abiotic dehydrochlorination of DDT to 2,2-bis(p-chlorophenyl)-1,1-dichloroethene (DDE) were determined. METHODS: Selective chemical oxidation of DDT to dichlorobenzophenone (DCBP) and analysis of each compound was used to calculate the stable chlorine isotope ratios of the alkyl and aromatic chlorines in DDT. To determine the KIE for dehydrochlorination, DDT was reacted in a basic solution to yield DDE at 52 degrees C, 60 degrees C, and 72 degrees C for 3, 5, and 5 days, respectively. RESULTS AND DISCUSSION: Significant intramolecular stable chlorine isotopic differences were observed in one sample of DDT where the alkyl and aromatic delta 37Cl values were -5.76 +/- 0.45 and -2.21 +/- 0.24%@1000, respectively. Dehydrochlorination of DDT to DDE in basic solutions at 52, 60, and 70 degrees C resulted in a substantial intramolecular KIE where the alkyl chlorines of DDE shifted by approximately 3%@1000 relative to the alkyl chlorines in DDT. However, no temperature dependence was observed. The KIE, calculated by an iterative program, was 1.009. CONCLUSIONS: Intramolecular differences in the stable chlorine isotope ratios were observed in DDT and this is the first such finding. Dehydrochlorination of DDT yields a measurable and distinct intramolecular stable chlorine KIE. RECOMMENDATION AND OUTLOOK: The results of this study demonstrate the existence of significant intramolecular differences in chlorinated organic compounds. Many other chlorinated semi-volatile and volatile organic contaminants are synthesized from multiple sources of chlorine, and we recommend that similar studies be performed on many such molecules in order to attain a clear understanding of their intramolecular chlorine isotopic differences. The existence of a measurable KIE for the dehydrochlorination of DDT to DDE shows the potential strength of using isotopic measurements to investigate the biogeochemistry of these important compounds. For example, the isotopically depleted aqueous chloride produced by dehydrochlorination of DDT to DDE may be a useful tracer of these reactions in freshwater environments.     

The effect of variability in industrial emissions on ozone formation in Houston, Texas

Ambient observations have indicated that high concentrations of ozone observed in the Houston/Galveston area are associated with plumes of highly reactive hydrocarbons, mixed with NO_x, from industrial facilities. Ambient observations and industrial process data, such as mass flow rates for industrial flares, indicate that the VOCs associated with these industrial emissions can have significant temporal variability. To characterize the effect of this variability in emissions on ozone formation in Houston, data were collected on the temporal variability of industrial emissions or emission surrogates (e.g., mass flow rates to flares). The observed emissions variability was then used to construct regionwide emission inventories with variable industrial emissions, and the impacts of the variability on ozone formation were examined for two types of meteorological conditions, both of which lead to high ozone concentrations in Houston. The air quality simulations indicate that variability in industrial emissions has the potential to cause increases and decreases of 10–52 ppb (13–316%), or more, in ozone concentration. The largest of these differences are restricted to regions of 10–20 km², but the variability also has the potential to increase regionwide maxima in ozone concentrations by up to 12 ppb.     

北方某城市饮用水中多环芳烃的来源及其在水处理过程中的行为研究

采用固相萃取(SPE)样品富集前处理技术和气相色谱/质联联用(GC/MS)分析方法,对北方某工业城市给水系统中的多环芳烃类化合物的含量水平进行了研究.结果表明,该城市多环芳烃污染水平较高,但总浓度均未超过城市供水水质标准(CJ/T206-2005)中限值(2μg/L).近郊水库由于受到燃料燃烧产生的多环芳烃的污染,成为该市饮用水中多环芳烃污染的主要来源.传统的混凝-砂滤工艺对多环芳烃有较好的去除效果,总去除率可达55.9%.     

Formation of organochlorine compounds in kraft pulp bleaching processes

The most abundant volatile organochlorine compounds (VOCCs), trichloroacetic and dichloroacetic acids and AOX, were determined in bleaching effluent and waste water from three kraft pulp mills during ClO₂ bleaching. 0.6–7.7 g of VOCCs per ton bleached pulp were formed, the most abundant being chloroform and dichloroacetic acid methyl ester. Most of the VOCCs were removed during treatment, and it was estimated that 2–30 t of VOCCs would be removed annually from activated sludge treatment plants in Finnish kraft pulp mills using elemental chlorine free bleaching, most likely by volatilization. Dichloroacetic acid was formed in considerably higher amounts than trichloroacetic acid, and both compounds were removed effectively during treatment. The formation of all organochlorine compounds decreased considerably when non-chlorinated bleaching was employed.