Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

教室内二氧化碳污染和新风量测定

新风量不足,呼吸产生的二氧化碳可造成教室内CO_2浓度严重超标,影响学生学习,降低课堂教学效果。以人呼出的CO_2作为示踪气体,测定研究教室有人和无人情况下教室内CO_2浓度变化,对教室新风量进行计算,其结果:室内CO_2排放条件不同,相应方程计算所得新风量基本一致,用忽略室外CO_2本底浓度的新风量计算公式,结果有约17%的误差。开启门窗产生对流,可保障教室内空气的新鲜。     

活性污泥生长的控制

在污水处理过程中，针对不同的运行环境，我们选择适当的运行工艺和参数。通过控制菌胶团细菌和丝状菌平衡生长，或者是使固着型原生动物占优势，来获得良好的活性污泥，保证出水达标排放。     

活性氧化铁/石英砂吸附剂去除水体中的重金属

介绍了活性氧化铁／石英砂吸附剂的特点和制备方法。该吸附能有效去除水体中的重金属，包括阳离子、阴离子、重金属颗粒物及一些络离子，且容易再生，被吸附的金属可以回收。     

Wood materials used as a means to reduce greenhouse gases (GHGs): An examination of wooden utility poles

There has been growing concern over the build-up of greenhouse gase(GHGs) in the atmosphere, particularly carbon dioxide (CO₂), as acause of global warming. The IPCC Third Assessment Report (2001) suggests two ways in which the choice of materials could berelevant. First, some materials, particularly wood, have the advantage thatthey continue to hold carbon (C)in their cells even after being convertedto products. The implications of this feature are well researched. Second,an area that is not well researched relates to the different energyrequirements for producing similar products made with different materials. Using the findings of recent research, this paper compares the energyrequirements and C emissions of manufacturing a product using wood withthat of other materials. The case study of utility poles demonstrates thepositive C and global warming consequences of the lower energyrequirements of wood in the U.S., compared to other materials such assteel or concrete. It demonstrates that GHG emissions associated withutility poles are a small but significant percent of total US annual emissions. Wood utility poles are associated with GHG emission reductions of 163Terragrams (Tg) of CO₂ when compared with steel poles. This isabout 2.8 percent of US annual GHG emissions, which are estimated atabout 5.28 Petragrams (Pg) of CO₂ annually. Thus, the use ofwooden utility poles rather than steel results in a small but significantreduction in total US emissions.     

Mechanisms of granular activated carbon anaerobic fluidized-bed process for treating phenols wastewater

ＩｎｔｒｏｄｕｃｔｉｏｎＢｅｆｏｒｅｔｈｅ 1 980ｓｃｏｎｖｅｎｔｉｏｎａｌｔｒｅａｔｍｅｎｔｐｒｏｃｅｓｓｅｓｏｆｐｈｅｎｏｌｓｗａｓｔｅｗａｔｅｒａｒｅｓｏｌｖｅｎｔｅｘｔｒａｃｔｉｏｎ ,ｐｈｙｓｉｃａｌａｄｓｏｒｐｔｉｏｎ ,ｃｈｅｍｉｃａｌｏｘｉｄａｔｉｏｎａｎｄａｅｒｏｂｉｃｂｉｏｌｏｇｉｃａｌｐｒｏｃｅｓｓ.Ａｍｏｎｇｔｈｅｂｉｏｌｏｇｉｃａｌｕｎｉｔｐｒｏｃｅｓｓｅｓａｃｔｉｖａｔｅｄｓｌｕｄｇｅｐｒｏｃｅｓｓｉｓｍａｉｎｏｎｅ.Ａｆｔｅｒｔｈｅ 1 980ｓａｎａｅｒｏｂｉｃｂｉｏｌｏｇｉｃ…     

磷肥厂副产氟硅酸利用的新方法

以磷肥厂副产氟硅酸为原料 ,加上碳酸钠 ,在适宜的工艺条件下反应 ,制取符合GB42 93— 84一级品的氟化钠和符合GB10 5 71— 89的白炭黑。该工艺具有原料易得、能耗低、成本低、投资省、无污染、经济效益好等优点     

苯的衍生物在活性炭/水界面上的吸附标准自由能及与其分子结构的关系

测定了25℃时活性炭自水中吸附苯、苯酚、苯胺、对－氯苯酚、苯甲酸、对－羟基苯甲酸、对－氯苯胺、硝基苯、对－氨基苯甲酸、对－硝式苯酚、对－硝基苯胺、对硝基苯甲酸的等温线，它们的等温线均为Langmuir型的，利用Langmuir参数计算了吸吸标准自由能变化△G^0，计算结果表明，△G^0具有加和性，即化合物的△G^0是组成该化合物各基团贡献之总和，化合物的分子量及分子连接性指数与△G^0有近似的线性关系。     

载甲苯活性炭微波脱附再生试验

研究了利用微波对载甲苯饱和活性炭的辐照再生。从甲苯的脱附和回收率2个方面探讨了活性炭再生的工艺条件。得出工艺的最佳条件：微波功率为500W、载气流速为300mL／min、辐射时间3min、活性炭量为10g。     

ACF的结构及其滤材特性的研究

根据活性炭纤维与颗粒状活性炭的平行实验，对比了ＡＣＦ与ＧＡＣ的物化特性和基本结构，以说明ＡＣＦ作为新型环境功能材料的特点，在实验室建立的流动法测定材料吸附特性的系统中，对ＡＣＦ在不同流量下对不同上游浓度污染气体（ＮＨ３）的吸附性能进行了测定，获得了ＡＣＦ的穿透曲线，对其吸附性能与吸附床流量和上游浓度进行了相关分析，并对以ＡＣＦ为滤料的空气过滤器的除污性能进行了测试。