Bio-Ethanol Production from Non-Food Parts of Cassava (<Emphasis Type="Italic">Manihot esculenta</Emphasis> Crantz)

Global climate issues and a looming energy crisis put agriculture under pressure in Sub-Saharan Africa. Climate adaptation measures must entail sustainable development benefits, and growing crops for food as well as energy may be a solution, removing people from hunger and poverty without compromising the environment. The present study investigated the feasibility of using non-food parts of cassava for energy production and the promising results revealed that at least 28% of peels and stems comprise dry matter, and 10 g feedstock yields >8.5 g sugar, which in turn produced >60% ethanol, with pH ≈ 2.85, 74-84% light transmittance and a conductivity of 368 mV, indicating a potential use of cassava feedstock for ethanol production. Thus, harnessing cassava for food as well as ethanol production is deemed feasible. Such a system would, however, require supportive policies to acquire a balance between food security and fuel.     

电解法处理含镍废水及纯镍的回收

采用电解回收法处理Ni2+含量为2g/L的废水,在阴极回收纯镍。研究了电解电流、极距、NH4Cl浓度、pH值等因素对Ni2+去除率、槽压、阴极能耗的影响,得出最优工艺参数为:温度20℃,电解时间20min时、电解电流300mA,极距15mm,NH4Cl浓度5g/L,pH值8.0,该条件下Ni2+去除率为96.926%,槽压16.21V,阴极能耗22.418kW.h/kg,在阴极可得到沉积6.45μm厚的镍板。     

Morphologie effects of channelization: the case of the Neebing-McIntyre floodway,Thunder Bay,Ontario, Canada

The Neebing-McIntyre floodway in Thunder Bay, Ontario, Canada, has been constructed with a relatively straight and uniform trapezoidal channel, compared with the prechannelized sinuous reaches of the Neebing and the McIntyre rivers. The flow regime of the floodway also contrasts significantly with the prechannelized regime, because of the combination of discharges from these rivers into a new channel and the regulation of flows by a diversion structure. The maximum channel capacity of the floodway is about 284 m³ s^–1 (175-year regional flood), compared with about 40 m³ s^–1 and 60 m³ s^–1, respectively, for the Neebing and the McIntyre. According to regime theories, the construction of a straight and trapezoidal channel has upset the equilibrium of the stream system and therefore should lead to some accelerated erosion and sedimentation processes in the new channel immediately after construction. Erosion potential is particularly high during higher discharge events, when flow velocities are expected to be greater than the prechannelized velocities of the Neebing and the McIntyre. The overall sediment yield of the watershed is low (71t km^–2 yr^–1), compared with other documented watersheds of North America, but the rates of deposition in the floodway are relatively high, mainly due to the backwater effect of Lake Superior. Unless maintained by constant channel work, the floodway will tend to fill up with sediment, until a postconstructional equilibrium is reestablished.     

An approach for analysing the potential for material efficiency improvement

Material efficiency improvement saves energy and reduces the consumption of primary resources and reduces the volume of waste. In this article an approach for analysing the potential for material efficiency improvement is proposed and discussed. In this approach the product functions performed by the materials and various improvement measures are taken into account. The potential for material saving and associated energy saving is assessed and evaluated economically. In this paper the approach is tested in an analysis of the potential for material efficiency improvement with respect to plastic packaging in the Netherlands. The technical reduction potential is found to be 34 ± 7% (157 ± 30 ktonne virgin plastics). Realization of this potential would improve the energy efficiency of the lifecycle of plastic packaging by 31% (10 PJ in 1988). From our study we conclude that our approach can indeed be used to investigate the potential for material efficiency improvement. However, a reliable technical and particularly an economical assessment of reduction measures cannot be made until more detailed data become available.     

Determination of optimum minimum flow from a dam by using energy analysis

The proposed restoration of an abandoned hydroelectric dam on the Quinebaug River, Connecticut, is studied using energy analysis. The analysis considers the effects of alternative minimum flow releases, ranging from 0 to 34 cubic meters per second (cms), on the total energy flow of the affected system. The principal system components affected by differing minimum flows are hydroelectric power generation, aquatic habitat, and gross aquatic ecosystem productivity.The minimum flow alternative resulting in the highest annual energy flow in the affected system is considered optimal. From this purely analytical point of view, the optimum minimum flow is 0 cms, due to the short length and low productivity of the regulated reach, and the lack of floodplain interactions.Simulations of longer and more productive river reaches were conducted. For very short, unproductive reaches, in the absence of a floodplain, the contribution of aquatic community productivity to total system energy flow is negligible compared to hydroelectric generation. Optimum minimum flows are higher for longer and more productive reaches. For such cases the operation of hydroelectric dams could reduce total system energy flow because the energy supplied by hydroelectric generation may be offset by losses in aquatic productivity due to diminished riverine habitat.     

Effects of increased wood energy consumption on carbon storage in forests of the United States

Large but feasible increases that have been projected for the production of wood energy in the United States can be expected to significantly alter the current carbon storage patterns in US forest vegetation. The 1976 net wood increment left after forest cutting equals about 136 × 10⁶ tons of carbon/year, with about 60% of the increment found in merchantable trees, and the remainder in nonmerchantable components.Achieving 5–10 quads of wood energy beyond 1976 levels by the year 2010 can significantly change current carbon storage patterns with the magnitude of change dependent on the extent of residue harvest to meet energy goals, and the rate of future forest growth. Complete loss of the apparent net wood increment is a possible outcome.Although the future growth and harvest situation cannot be known now, a range of possible scenarios suggests that US forests in the year 2010 will store much less carbon than today, thus significantly changing their role in the global carbon cycle.     

Advancement of renewables in Bangladesh and Thailand: Policy intervention and institutional settings

This article reviews and analyses the advancement of renewable sources of energy in Bangladesh and Thailand in terms of policy intervention and institutional settings. Since renewable forms of energy emit far smaller amounts of greenhouse gas compared with fossil fuels, their use should mitigate climate change impacts while contributing to the provision of energy services. The article turns first to a review of energy–environment trends and the potential for renewables in these two nations. It then discusses strategies for the advancement of renewables. It is argued that further significant efforts can be made towards the advancement of renewables in Bangladesh and Thailand. These two nations could also learn from the experience in industrialized nations and other developing nations with regard to requisite policy instruments and processes. A number of barriers remain to the advancement of renewables, especially in terms of policy arrangements, institutional settings, financing mechanisms and technologies. Resources, cooperation and learning are required in order to overcome such barriers and to foster the development of necessary policy measures. Implementation of the clean development mechanism (CDM) under the Kyoto Protocol, and replication and adaptation of effective strategies from other settings are possible avenues for this.     

Energy and carbon balances of wood cascade chains

In this study we analyze the energy and carbon balances of various cascade chains for recovered wood lumber. Post-recovery options include reuse as lumber, reprocessing as particleboard, pulping to form paper products, and burning for energy recovery. We compare energy and carbon balances of chains of cascaded products to the balances of products obtained from virgin wood fiber or from non-wood material. We describe and quantify several mechanisms through which cascading can affect the energy and carbon balances: direct cascade effects due to different properties and logistics of virgin and recovered materials, substitution effects due to the reduced demand for non-wood materials when wood is cascaded, and land use effects due to alternative possible land uses when less timber harvest is needed because of wood cascading. In some analyses we assume the forest is a limiting resource, and in others we include a fixed amount of forest land from which biomass can be harvested for use as material or biofuel. Energy and carbon balances take into account manufacturing processes, recovery and transportation energy, material recovery losses, and forest processes. We find that land use effects have the greatest impact on energy and carbon balances, followed by substitution effects, while direct cascade effects are relatively minor.