Cr3+掺杂对TiO2薄膜光催化活性的影响

采用溶胶-凝胶法制备了TiO2粉末和以釉面瓷砖为载体的TiO2薄膜,讨论了不同Cr3+掺杂浓度对TiO2光催化活性的影响,并采用UVVIS对其光学性能进行了检测.结果表明,Cr3+掺杂和釉面瓷砖的交互作用能够显著提高TiO2薄膜的光催化活性,最佳掺杂浓度为6.04×1017个·cm-3,且随着TiO2光催化活性的提高,薄膜的吸收带边发生了明显的红移,提高了可见光的利用率.     

催化湿式氧化处理造纸废水的研究

以过渡金属氧化物CuO为活性组分,采用催化湿式氧化法处理造纸废水,考察Cu负载量、催化剂用量、反应温度对废水COD去除率的影响。结果表明:固定氧气分压在2.5MPa和反应时间3h,催化剂用量为3g,Cu负载量为4%,反应温度为220℃,500mL浓度为3250mg/L造纸废水的COD去除率为90%,色度去除率为89%,pH值由9.6变为7.8。另外,对催化剂进行再生处理和稳定性测试。结果表明:450℃下活化3h,在上述相同反应条件下,对原废水的COD去除率降低为88%,重复使用9次后对废水的COD去除率仍能保持在85%左右。     

无锡市大气PM2.5中黑碳的粒径分布与混合态特征

针对长江三角洲地区PM2.5中的重要组分黑碳(BC)气溶胶,2010~2011年利用单颗粒黑碳光度计(SP2),对江苏省无锡市夏冬两季BC气溶胶的质量浓度、粒径分布及单颗粒混合态进行了连续在线观测.结果表明,无锡市冬季BC质量浓度(6.1μg/m3)是夏季(2.5μg/m3)的2.4倍,内混态BC比例(NIB)冬季(64.8%)也显著高于夏季(44.6%),说明冬季BC污染与来外来污染传输有关.反向轨迹分析表明,来自华北平原的污染气团输入是冬季高浓度BC污染的首要原因. NIB的日变化趋势与BC质量浓度的完全相反.午后BC质量浓度最低时NIB最高,反映了二次光化学产物包覆在BC颗粒外层的老化过程.此外,夏冬两季BC粒径分布保持稳定,其质量浓度峰值对应粒径在225nm左右,数浓度峰值对应粒径在120nm左右.     

沙颍河流域行政单元的排污权初始分配研究

初始排污权的有效分配是排污权交易制度实施的基础,结合中国现行行政特征,以行政单元作为排污权初始分配主体开展排污权初始分配研究。具体是：以沙颍河流域为例,根据淮河水利委员会制定的沙颍河流域水功能区划及COD、氨氮限排总量要求,以COD、氨氮作为排污权初始分配的客体,通过等比例削减方法对沙颍河流域内的行政单元进行了排污权初始分配,得到了流域内各市县级行政单元的COD、氨氮初始排放权,并在此基础上从政策可行性、区域合作性及上下游城市的协调性等方面提出了开展排污权初始分配的若干建议。     

一种有机硅改性丙烯酸防污涂料的研究

目的通过在丙烯酸树脂分子中引入有机硅,制备一种具有低表面能的有机硅改性丙烯酸树脂CP-CC021。方法探讨合成工艺中有机硅单体和引发剂含量以及添加纳米级Si O2粒子填料对涂层性能的影响规律。结果获得了最大接触角的最佳工艺条件,添加纳米Si O2粒子增大了涂层的表面粗糙度,在涂层表面形成了大量微-纳结构状的突起,显著提高涂层的疏水性能。结论有机硅单体(VTMS)质量分数为23.0%,引发剂(AIBN)质量分数为0.50%,纳米Si O2粒子添加量(质量分数)为7.4%,得到的涂层接触角为126.1°。     

利用玉米浸泡液产电的微生物燃料电池研究

以玉米淀粉生产过程中的浸泡液（玉米浸泡液）作为接种液和基质,利用“三合一”膜电极的单室空气阴极微生物燃料电池进行试验,采用在线监测电压和废水分析方法对产电功率和化学需氧量（COD）、氨氮进行测定,探讨高COD、高氨氮有机废水产电及废水处理的可行性.结果表明,经过94 d（1个周期）的连续运行（固定外电阻为1 000 Ω）,17 d时输出电压达到最大（525.0 mV）,稳定期最大输出功率可达169.6 mW/m²,此时电池相应的电流密度为440.2 mA/m²,内阻约为350 Ω,开路电压619.5 mV;但燃料电池电子利用效率较低（库仑效率为1.6%）;1个周期结束时浸泡液的COD去除率达到51.6%,氨氮去除率25.8%.本试验利用玉米浸泡液成功获得电能,同时对浸泡液有效地进行了处理,为其资源化利用提供新途径.     

镉引起蚕豆(Vicia faba)叶片DNA损伤和细胞凋亡研究

以蚕豆为研究对象,采用碱性、半碱性和中性彗星实验方法研究Cd对植物DNA的损伤,同时还采用DAPI染色法从细胞形态学入手研究Cd诱导的蚕豆叶片的细胞凋亡.用3种彗星实验研究Cd处理蚕豆叶片DNA损伤,结果表明Cd能够引起蚕豆叶片DNA损伤,但是不同Cd浓度引起DNA损伤的种类不同:5mg·L^-1Cd处理主要引起单链DNA损伤和碱性不稳定位点的形成;10mg·L^-1Cd处理时开始检测到DNA双链断裂;20mg·L^-1Cd处理下,各种类型的DNA损伤均明显增加,且DNA双链断裂尤其明显.DAPI染色法通过细胞形态学变化来检测蚕豆叶片细胞凋亡的结果表明,蚕豆叶片细胞在Cd处理下发生凋亡的过程与DNA损伤过程有很大的相关性.结果表明,Cd是一种基因毒性物质,同时证明Cd引起的DNA损伤是引起细胞发生凋亡的机制之一.     

TiO2@palygorskite composite for the efficient remediation of oil spills via a dispersion-photodegradation synergy

• A novel and multi-functional clay-based oil spill remediation system was constructed. • TiO₂@PAL functions as a particulate dispersant to break oil slick into tiny droplets. • Effective dispersion leads to the direct contact of TiO₂ with oil pollutes directly. • TiO₂ loaded on PAL exhibits efficient photodegradation for oil pollutants. • TiO₂@PAL shows a typical dispersion-photocatalysis synergistic remediation. Removing spilled oil from the water surface is critically important given that oil spill accidents are a common occurrence. In this study, TiO₂@Palygorskite composite prepared by a simple coprecipitation method was used for oil spill remediation via a dispersion-photodegradation synergy. Diesel could be efficiently dispersed into small oil droplets by TiO₂@Palygorskite. These dispersed droplets had an average diameter of 20–30 mm and exhibited good time stability. The tight adsorption of TiO₂@Palygorskite on the surface of the droplets was observed in fluorescence and SEM images. As a particulate dispersant, the direct contact of TiO₂@Palygorskite with oil pollutants effectively enhanced the photodegradation efficiency of TiO₂ for oil. During the photodegradation process, •O₂⁻and •OH were detected by ESR and radical trapping experiments. The photodegradation efficiency of diesel by TiO₂@Palygorskite was enhanced by about 5 times compared with pure TiO₂ under simulated sunlight irradiation. The establishment of this new dispersion-photodegradation synergistic remediation system provides a new direction for the development of marine oil spill remediation.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

饮用水生物处理中微生物量和活性的测定方法

微生物量和微生物活性是饮用水生物处理工艺设计与运行的重要参数。总结论述了适用于表示饮用水生物处理过程生物膜中微生物数量和活性的几种主要指标的测定方法。