Carbon footprint of food - approaches from national input-output statistics and a LCA of a food portion

The aim of the study, on which this paper is based, was to provide guidance to consumers to make environmentally responsible choices in their food consumption, to assist food supply chain stakeholders to identify the key areas for environmental improvements, and to provide policy makers with a tool for monitoring the potential impacts on climate change resulting from developments within the food sector. At the macro level, the EIO-LCA model was developed specifically for the Finnish food chain; at the micro level, LCAs were performed on 30 lunch portions. The contribution of the Finnish food chain to climate change was 14%, which comprised 40% CO₂ emissions, 25% CH₄ emissions, and 34% N₂O emissions. The share of impacts from domestic agricultural processes was the highest, at 69%. The impact of a single lunch portion ranged between 0.65 and 3.80 kg of equivalent CO₂. According to the EIO-LCA model, the average impact was 7.7 kg CO₂ eq/person daily. The consumer phase accounted for between 8 and 47% of the climate change impacts for homemade portions. In ready-to-eat portions industry and retail phases were emphasized, representing 25-38% of climate change impacts. We present an approach to steer the Finnish food sector onto an environmentally sustainable path; practical tools for consumers and farmers will especially need to be developed further.     

供碳源载体及其在低碳氮比污水处理中的应用研究

为解决低C/N污水的脱氮问题,本实验自行研制开发了一种新型碳聚合物载体.对该载体进行低C/N污水的生物膜脱氮研究,考察了HRT、pH、DO、温度等因素对系统同步硝化反硝化脱氮效果的影响.结果表明:在C/N比为4、pH=8、DO=1 mg/L、HRT=6 h,T=24℃的条件下,氨氮及总氮的去除率分别可以达到90%和70...     

Phosphatase activity and culture conditions of the yeast Candida mycoderma sp. and analysis of organic phosphorus hydrolysis ability

Orthophosphate is an essential but limiting macronutrient for plant growth. About 67% cropland in China lacks sufficient phosphorus, especially that with red soil. Extensive soil phosphorus reserves exist in the form of organic phosphorus, which is unavailable for root uptake unless hydrolyzed by secretory acid phosphatases. Thus, many microorganisms with the ability to produce phosphatase have been exploited. In this work, the activity of an extracellular acid phosphatase and yeast biomass from Candida mycoderma was measured under different culture conditions, such as pH, temperature, and carbon source. A maximal phosphatase activity of 8.47 × 10^5±0.11× 10^5 U/g was achieved by C. Mycoderma in 36 hr under the optimal conditions. The extracellular acid phosphatase has high activity over a wide pH tolerance range from 2.5 to S.0 （optimum pH 3.5）. The effects of different phosphorus compounds on the acid phosphatase production were also studied. The presence of phytin, lecithin or calcium phosphate reduced the phosphatase activity and biomass yield significantly. In addition, the pH of the culture medium was reduced significantly by lecithin. The efficiency of the strain in releasing orthophosphate from organic phosphorus was studied in red soil （used in planting trees） and rice soil （originating as red soil）. The available phosphorus content was increased by 230% after inoculating 20 days in rice soil and decreased by 50% after inoculating 10 days in red soil. This work indicates that the yeast strain C. mycoderma has potential application for enhancing phosphorus utilization in plants that grow in rice soil.     

低碳高氮污水处理应用技术研究

针对碳氮比小于7的污水,其碳源不能满足硝化与反硝化的要求这一问题,通过改变SBR工艺的运行方式、调解工艺参数等技术手段,使其能够达标处理此类工业废水,并通过某淀粉厂的工程实例进行了验证:采用改良的SBR工艺可以对低碳高氮污水进行有效的处理。     

Effect of oxide-based fluxes on mechanical and metallurgical properties of Dissimilar Activating Flux Assisted-Tungsten Inert Gas Welds

Present investigation is to study the “Effect of Activating Fluxes on Mechanical and Metallurgical Properties of Dissimilar Activated Flux-Tungsten Inert Gas Welds”. Effect of current, welding speed, joint gap and electrode diameter on weld bead dimensions on 6 mm thick dissimilar weld between carbon steel to stainless steel, was studied under Activated Flux-Tungsten Inert Gas Welding process. During this investigation three different types of oxide powders were used-TiO₂, ZnO and MnO₂. After welding samples were subject to mechanical testing, in addition to characterization via micro hardness and microstructures of Normal Tungsten Inert Gas Welds and Activated Flux-Tungsten Inert Gas Welds. Activating fluxes TiO₂ and ZnO are effective fluxes for Activated Flux-Tungsten Inert Gas Welding of dissimilar weld between CS to SS. Highest depth/width (D/W) ratio reported under TiO₂ and ZnO fluxes compare to Normal-Tungsten Inert Gas Welds. Lowest angular distortion was observed under TiO₂ flux compare to Normal-Tungsten Inert Gas Welds. Mechanical properties, Joint Efficiency of Activated Flux-Tungsten Inert Gas Welds are higher than normal-Normal Tungsten Inert Gas Welds. Tensile Test specimens of both the processes failed from the parent metal (carbon steel side). Carbon migration from CS to SS, had occurred which led to failure of weld joints from CS side.     

Lay concepts on CCS deployment in Switzerland based on qualitative interviews

Laypeople's acceptance and perception of Carbon Dioxide Capture and Storage (CCS) can have an influence on its political feasibility. It is important, therefore, to study how laypeople perceive CCS and which cognitions they hold with respect to this technique. We conducted in-depth interviews with laypeople (N = 16) to explore their mental concepts of CCS. Little knowledge about CCS was detected among laypeople. We also found that laypeople fear that a deployment of CCS could create incentives that would hinder a sustainable development of the energy economy. A misunderstanding of the concepts of hydro- and geostatic pressure, as well as a lack of knowledge about the physical–chemical properties of carbon dioxide seemed to trigger fundamental rejection of CCS among some laypeople. This qualitative study identifies concepts that underlie CCS perception, and these should be objects of future studies. We provide some suggestions for risk management and communication about CCS.     

内蒙古省级层面碳汇总量评估必要性与框架初探

结合国内外最新研究进展，制定适合内蒙古区域特点的碳汇测算方法和评估体系框架，科学估算碳汇状况，系统分析我区不同陆地生态系统类型的碳汇大小及其机制，可提供关于我区陆地生态系统碳汇功能可信、翔实和正确的估算结果；新时期省级层面上开展陆地生态系统碳汇总量评估十分重要。     

Modeling the carbon dynamics of the La Grande hydroelectric complex in northern Quebec

A mechanistic semi-empirical carbon cycle model of the La Grande reservoir complex in northern Quebec, Canada was conceived in order to investigate the climate impact of such a large alteration of the continental water cycle. The model includes inputs from the drainage basin, organic matter release from flooded soils, CO₂ emissions across the water-atmosphere interface and sedimentation. Most input data stems from previous research by our group on those ecosystems. The model includes the seven reservoirs of the La Grande complex and was run for periods of 50 and 100 years. Terrigeneous dissolved, particulate and suspended soil carbon fluxes and concentrations were computed. Over 100 years, 31.3 × 10¹² g C are released from flooded soils, equivalent to 28-29% of inputs from the drainage basin. 40-74% of dissolved organic carbon is mineralized. CO₂ fluxes over 100 years are 50.5-79.8 × 10¹² g C, 46.4-67.9 × 10¹² g C more than in the absence of reservoirs. The increase in mineralization of organic matter and in CO₂ emissions is a result of the increase in cumulated water residence time due to the creation of the reservoirs. Changes in other carbon sinks and sources likely offset a part of this additional carbon flux to the atmosphere. In the first years following flooding of the reservoir, organic carbon release from flooded soils exceeds CO₂ emissions, implying the downstream export of large quantities of eroded soil organic carbon. After this initial period, CO₂ emissions are fuelled by organic carbon originating from the drainage basin.     

Deposition of reactive nitrogen during the Rocky Mountain Airborne Nitrogen and Sulfur (RoMANS) study

Increases in reactive nitrogen deposition are a growing concern in the U.S. Rocky Mountain west. The Rocky Mountain Airborne Nitrogen and Sulfur (RoMANS) study was designed to improve understanding of the species and pathways that contribute to nitrogen deposition in Rocky Mountain National Park (RMNP). During two 5-week field campaigns in spring and summer of 2006, the largest contributor to reactive nitrogen deposition in RMNP was found to be wet deposition of ammonium (34% spring and summer), followed by wet deposition of nitrate (24% spring, 28% summer). The third and fourth most important reactive nitrogen deposition pathways were found to be wet deposition of organic nitrogen (17%, 12%) and dry deposition of ammonia (14%, 16%), neither of which is routinely measured by air quality/deposition networks operating in the region. Total reactive nitrogen deposition during the spring campaign was determined to be 0.45 kg ha⁻¹ and more than doubled to 0.95 kg ha⁻¹ during the summer campaign.