制药行业废炭的再生与利用

采用强制放电技术，通过对东北制药总厂部分车间的废炭进行吸附能力恢复试验，找出一种废炭再生方法．此工艺简单、易于操作，所需人员少，吸附能力恢复率４００％以上，每千克炭能耗２．５ｋＷ／ｈ，再生温度８５０℃．     

超临界CO2萃取再生活性炭技术研究进展

超临界流体由于密度大、粘度低、表面张力小，是再生活性炭的理想溶剂，文章介绍了超临界ＣＯ２萃取再生活性炭的原理，研究现状，设备和工艺流程及对该工艺的影响因素，表明了该技术在活性炭再生上的特点，优势及应用前景。     

活性炭纤维处理甲苯废水的试验

采用活性炭纤维处理甲苯模拟废水，通过静态和动态吸附实验，测定了吸附等温线、动态穿透曲线，并研究了ｐＨ、温度、吸附时间对处理效果的影响。结果表明，溶液ｐＨ在３￣５范围内对吸附效率影响不大；温度升高，吸附效率有所降低，吸附时间存在最佳值，吸附饱和炭用蒸汽再生，重复使用７次，吸附效率无明显变化，活性炭纤维对甲苯的吸附容量大，吸附速率快，再生条件温和。     

The sensitivity of current and future forest managers to climate-induced changes in ecological processes

Climate vulnerability of managed forest ecosystems is not only determined by ecological processes but also influenced by the adaptive capacity of forest managers. To better understand adaptive behaviour, we conducted a questionnaire study among current and future forest managers (i.e. active managers and forestry students) in Austria. We found widespread belief in climate change (94.7 % of respondents), and no significant difference between current and future managers. Based on intended responses to climate-induced ecosystem changes, we distinguished four groups: highly sensitive managers (27.7 %), those mainly sensitive to changes in growth and regeneration processes (46.7 %), managers primarily sensitive to regeneration changes (11.2 %), and insensitive managers (14.4 %). Experiences and beliefs with regard to disturbance-related tree mortality were found to particularly influence a manager’s sensitivity to climate change. Our findings underline the importance of the social dimension of climate change adaptation, and suggest potentially strong adaptive feedbacks between ecosystems and their managers.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-015-0737-6) contains supplementary material, which is available to authorized users.     

CO_2在哌嗪水溶液中的吸收和再生特性研究

利用压力釜在100⁵00 kPa 压力和303500 kPa 压力和303³23K温度下,研究了 2.0323K温度下,研究了 2.0 4.9的哌嗪水溶液对二氧化碳的平衡吸收量,测试了温度和浓度对平衡吸收量的影响。co2的平衡吸收量随着浓度的增加而增加。313 K的操作温度既能保证较高的吸收量,又能保证较快的吸收速率,因此是合适的操作温度。对3.5M的PZ水溶液,在温度为368 4.9的哌嗪水溶液对二氧化碳的平衡吸收量,测试了温度和浓度对平衡吸收量的影响。co2的平衡吸收量随着浓度的增加而增加。313 K的操作温度既能保证较高的吸收量,又能保证较快的吸收速率,因此是合适的操作温度。对3.5M的PZ水溶液,在温度为368³83K的条件下进行再生。温度为368 K时,再生效率为82.13%,再生过程需 55 min,而升温至383 K后再生效率大幅提升至 95.98%,再生时间迅速降为41 min。考虑到再生的时间、效率及能耗等因素,在 378 K下进行再生相对适宜。在373K 的操作温度下进行多次再生实验,PZ 水溶液经过10个周期的实验后9.76%,吸收容量与新鲜溶液相比只损失了并且只降低了1.0个pH,这也说明,PZ水溶液再生效率及连续再生能力较为突出。     

管道消声器测试系统

研制了完全符合ISO7135-2003和GB/T 25516-2010新标准的管道消声器测试系统。为噪声控制、气动声学、声隐身、环境声学研究工作提供科研支撑和保障条件。解决目前国内管道消声器测试系统不标准、测量不确定度偏大,测试结果难以比对的问题。该测试系统可满足较大气流(≤16.5m3/s)、较大尺度消声器的以下测试功能:——有气流和无气流状态下,管道消声器的频带插入损失;——消声器的气流再生噪声的频带声功率级;——有气流通过时,管道消声器的全压损失;——风道末端单元的频带传声损失。     

Performance Evaluation of Waste Activated Carbon on Atrazine Removal from Contaminated Water

Abstract

In this study, the potential of spent activated carbon from water purifier (Aqua Guard, India) for the removal of atrazine (2 chloro-4 ethylamino-6-isopropylamino-1, 3, 5 triazine) from wastewaters was evaluated. Different grades of spent activated carbon were prepared by various pretreatments. Based on kinetic and equilibrium study results, spent activated carbon with a grain size of 0.3–0.5 mm and washed with distilled water (designated as WAC) was selected for fixed column studies. Batch adsorption equilibrium data followed both Freundlich and Langmuir isotherm. Fixed bed adsorption column with spent activated carbon as adsorbent was used as a polishing unit for the removal of atrazine from the effluent of an upflow anaerobic sludge blanket (UASB) reactor treating atrazine bearing domestic wastewater. Growth of bacteria on the surface of WAC was observed during column study and bacterial activity enhanced the effectiveness of adsorbent on atrazine removal from wastewater.     

Activated carbon/Fe(3)O(4) nanoparticle composite: fabrication, methyl orange removal and regeneration by hydrogen peroxide

In the water treatment field, activated carbons (ACs) have wide applications in adsorptions. However, the applications are limited by difficulties encountered in separation and regeneration processes. Here, activated carbon/Fe₃O₄ nanoparticle composites, which combine the adsorption features of powdered activated carbon (PAC) with the magnetic and excellent catalytic properties of Fe₃O₄ nanoparticles, were fabricated by a modified impregnation method using HNO₃ as the carbon modifying agent. The obtained composites were characterized by X-ray diffraction, scanning and transmission electron microscopy, nitrogen adsorption isotherms and vibrating sample magnetometer. Their performance for methyl orange (MO) removal by adsorption was evaluated. The regeneration of the composite and PAC-HNO₃ (powdered activated carbon modified by HNO₃) adsorbed MO by hydrogen peroxide was investigated. The composites had a high specific surface area and porosity and a superparamagnetic property that shows they can be manipulated by an external magnetic field. Adsorption experiments showed that the MO sorption process on the composites followed pseudo-second order kinetic model and the adsorption isotherm date could be simulated with both the Freundlich and Langmuir models. The regeneration indicated that the presence of the Fe₃O₄ nanoparticles is important for a achieving high regeneration efficiency by hydrogen peroxide.     

Synthesis of a highly recoverable 3D MnO2/rGO hybrid aerogel for efficient adsorptive separation of pharmaceutical residue

Water contamination by non-steroidal anti-inflammatory drugs, such as acetaminophen, is an emerging ecological concern. In this study, a new three-dimensional manganese dioxide-engrafted reduced graphene oxide (3D MnO₂/rGO) hybrid aerogel was developed for acetaminophen sequestration. The synthesis involved firstly the self-assembly of GO aerogel, followed by thermal reduction and in-situ MnO₂ growth by redox-reaction. The aerogel demonstrated interlinked planes with smooth surfaces deposited with MnO₂ nanospheres and pores of 138.4 – 235.3 µm width. The influences of adsorbent dosage, initial pH, acetaminophen concentration, temperature and contact time were investigated. It was determined that the adsorption of acetaminophen occurred on uniform sorption sites in the aerogel, as suggested by the best fit of data to the Langmuir isotherm, yielding a maximum adsorption capacity of 252.87 mg/g. This highest adsorption performance of the 3D MnO₂/rGO aerogel was attained at a dosage of 0.6 g/L, initial pH of 6.2 and temperature of 40°C. The process kinetics were in-line with the pseudo-first-order and pseudo-second-order kinetics at 10 and 20 – 500 mg/L concentrations, respectively. Thermodynamic assay showed the spontaneity and endothermicity features of the 3D MnO₂/rGO-acetaminophen system. The acetaminophen adsorption mechanisms were mainly hydrogen bonding and pore entrapment. Moreover, the as-synthesised aerogel was effectively regenerated using acetone and re-utilised in four adsorption-desorption cycles. Overall, the results highly recommend the implementation of the 3D MnO₂/rGO hybrid aerogel for purification of wastewater polluted by acetaminophen residue.     

微波技术在废水处理中的应用

文章简述了微波直接辐射和微波再生技术在废水处理中的应用.指出了微波技术在废水处理中存在的问题,并对其发展前景进行了展望.