Influences of working pressure on properties for TiO2 films deposited by DC pulse magnetron sputtering

TiO2 films were deposited at room temperature by DC pulse magnetron sputtering system.The crystalline structures,morphological features and photocatalytic activity of TiO2 films were systematically investigated by X-ray diffraction (XRD),atomic force microscopy and ultraviolet spectrophotometer,respectively.The results indicated that the working pressure was the key deposition parameters influencing the TiO2 film phase composition at room temperature,which directly affected its photocatalytic activity.With increasing the working pressure,the target self-bias decreases monotonously.Therefore,low temperature TiO2 phase (anatase) could be deposited with high working pressure.The anatase TiO2 films deposited with 1.4 Pa working pressure displayed the highest photocatalytic activity by decomposition of Methyl Orange solution,which the degradation rate reached the maximum (35%) after irradiation by ultraviolet light for 1 h.     

紫外线消毒后微生物的光复活特性及其评价方法

随着紫外线消毒技术应用的日益广泛,污水紫外线消毒后微生物的光复活特性值得关注。文章综述了光复活的机理、具有光复活能力的微生物种类、影响光复活的因素以及光复活的评价方式等,以期为系统研究光复活提供参考。具有复活能力的微生物种类较多,主要和体内所含光复活酶相关。影响光复活的因素涉及微生物、污水特性、紫外线系统及光复活条件四方面。评价光复活的方式至今没有统一标准。光复活及其对污水消毒的影响有待进一步深入研究。     

水中六氯苯的高级氧化降解机理及其动力学探讨

采用UV、O3、UV/O3高级氧化法对水中六氯苯(HCB)的降解效果及机理进行了研究.结果表明, UV本身对HCB的去除贡献率不大, HCB可被O3、UV/03快速降解,即UV相似文献   

UV/H2O2法处理焦化废水的试验研究

焦化废水是一种典型的成分复杂的难降解有机废水。实验利用UV／H2O2法对焦化废水的处理进行研究,探讨了不同反应时间、H2O2投加量、pH值等因素对COD去除率及色度降解效果的影响。结果表明．废水起始COD质量浓度为1334mg几时,H2O2投加浓度为45mmol/L,pH值=11,紫外灯照射60min,COD去除率可达70％以上;随着H2O2投加量的增加以及pH值的升高,污水的色度明显降低。     

污水处理中紫外消毒效果的研究

紫外消毒技术相对于氯化法消毒,能够快速、有效地去除污水中粪大肠杆菌,操作简单方面,无副产物生成,对周围环境和人员安全可靠,在中国许多污水处理厂都已取代氯化法消毒并广泛应用。阐述了紫外消毒和微生物光复活现象的原理,并通过大量试验来研究紫外消毒技术去除粪大肠杆菌的效果,及经紫外消毒后出水中粪大肠杆菌光复活现象对紫外消毒效果的影响,提出可采用出水避光排放、增加紫外照射剂量、延长照射时间等方法来控制微生物光复活现象。     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.     

紫外光降解反应器去除氯苯气体模型的建立与应用

从光化学反应过程出发,基于线性光源球面辐射能量分布（LSSE）,以反应器内部空间的辐射能吸收密度、空塔停留时间、进口浓度等为主要参数,建立了气相环境中紫外光化学反应器去除氯苯的数学模型.结果表明,建立的模型能很好地模拟和预测紫外光化学反应器对氯苯气体的去除性能.氯苯气体的紫外光化学反应表现出一级反应动力学的特征.该模型包含了紫外光降解反应器设计的主要参数,同时被用于预测了反应器在不同进口浓度和不同空塔停留时间条件下的出口氯苯浓度,进而获得不同进口浓度达标排放所需要的最小空塔停留时间,为气相污染物的紫外光降解反应器的设计与运行提供了重要的理论指导.     

UV/H2O2工艺降解微囊藻毒素-LR

采用UV/H₂O₂联合工艺,研究了光强、初始浓度、H₂O₂投加量、pH及阴离子对微囊藻毒素-LR (MC-LR)去除率的影响.结果表明,单独H₂O₂对MC-LR基本无去除效果;单独UV工艺可以一定程度上降解MC-LR;而UV/H₂O₂联合工艺由于发生协同作用明显提高降解效率.试验发现,随着光强的增大,MC-LR的去除率不断提高;随着MC-LR初始浓度的增大,其去除率不断降低;随着H₂O₂投加量的增大,降解速率常数逐渐增大,当H₂O₂投加量由1 mmol/L增大到3 mmol/L时,降解速率常数由0.084 4上升到0.166 4;当pH为3.13时,在相同条件下MC-LR的去除效果最好;阴离子的投加不利于MC-LR的降解,其中CO^2-₃、NO^-₃影响最大.     

一种新型石墨电极的制备及其对苯酚的去除

为了探索一种对有机废水处理有效、廉价、来源广泛、环境友好的电极,以石墨、环氧树脂、固化剂和丙酮为原料,研究制备了一种新型石墨电极 (NGE). 分别采用热水浸泡、乙醇溶液回流、丙酮回流、超声-丙酮回流以及电化学法对制备的石墨电极进行预处理,前三者效果较差,超声-丙酮回流可改善处理效果,但不够理想,电化学法可取得满意的效果.苯酚降解的UV光谱分析表明,尽管商品石墨电极 (CGE) 比NGE具有更高的苯酚氧化效率,但其电解液积累大量的苯醌,而NGE电解液中苯醌积累量少,并且电解过程中逐渐降低. NGE比CGE具有更好的TOC去除效果,两者TOC去除率分别为40%和31%. SEM分析结果表明,CGE被严重腐蚀,NGE无明显变化,表现出良好的稳定性.     

颗粒物对紫外线灭活二级出水中粪大肠菌的影响

用低压紫外线照射具有相同颗粒物粒径分布的一系列水样,把实验结果带入二重动力学模型进行计算,评价自然状态下颗粒物对粪大肠菌的保护作用. 结果表明,二级出水中的大部分粪大肠菌都与颗粒物交连在一起;在颗粒物<10⁵ C·mL^-1时,颗粒物的增加会明显降低紫外线对二级出水中粪大肠菌的灭活率,但当颗粒物>10⁵ C·mL^-1时,这种影响不明显.从二重动力学模型的计算结果来看,对于不同颗粒物浓度的水样,难灭活的微生物所占的比重很小且比较稳定,大多数与颗粒物结合的粪大肠菌都较易被紫外线灭活.