船舶柴油机NOx后处理技术的进展

根据国内外的降低NOx排放方面最新的成果和科研动态，主要介绍了当前正在研究或者已经应用于实际的有效降低柴油机NOx排放的技术措施，并分析了各种技术方法的特点和在实际应用过程中面临的问题。     

阿拉伯半岛沙尘时空分布特征及气象条件

通过对阿拉伯半岛地面90个气象站20年沙尘天气、AI指数及风场的时空分布特征结合气象条件分析，确定该区域沙尘天气的发生规律及传输路径.结果表明：永久多尘地区是半岛扬沙发生最频繁的区域，从2月开始扩张，并在6月达到最大.浮尘的时空分布与扬沙类似，但还存在希贾兹山脉北部和波斯湾沿岸的高值中心，3月与永久多尘地区的高值区连成一片，6~7月达到最大，然后开始收缩并分裂成几个小中心.AI指数存在一个像倒箭头的相对高值中心，其变化具有明显的单峰分布，强度和范围在6月最大.10~4月和5~9月半岛分别盛行顺时针、逆时针旋转的风向，它们将沙尘远程传输到下游地区.天气学分析表明，冷锋入侵半岛使得来自北方的冷空气快速锲入暖空气之下，是导致沙尘天气出现的主要原因；后向轨迹聚类分析显示，半岛存在3类传输路径，其重要性依次为西北方向撒哈拉沙漠的远程传输、反气旋风场将来自伊拉克或伊朗的沙尘远程传输和本地的沙尘源传输.     

加强松花江上游石油开发的预警研究

松花江上的石油开发对松花江和哈尔滨市饮用水源地的潜在污染危害已引起政府部门的重视.松花江上石油开发中一旦出现事故其污染所造成突发事故将是十分严重的.应加强松花江上石油开发的预警研究.并对松花江上的石油开发现状、存在的问题和隐患进行深入调查研究.对江上已开发和在建油田制定出相应对策,确保松花江水质安全和哈尔滨市饮用水源地的水质安全.     

不同类型污染源颗粒物的粒度分布特征分析

对影响葫芦岛市城区环境质量可吸入颗粒物的各类污染源颗粒物的粒度成份、分布特征进行分析。采用斯托克直径ds(Stokes′Diameter)表示法,利用巴柯离心机对样品进行处理,得到各类排放源所排放的不同粒径的颗粒物重量百分比,为环境管理提供科学依据。     

ACCU采样和PIXE技术用于PM10污染溯源的研究

使用美国RP公司生产的多通道自动采样系统(ACCU)在上海吴淞工业区进行冬季3个月8个不同风向的PM10采样；使用质子激发X荧光发射方法(PIXE)测定颗粒物中18个无机元素浓度．结果发现，8个风向的质量浓度分布取决于不同方位的大气质量状况．将大气颗粒物中的元素浓度作为环境污染指纹，8个方位的无机元素浓度分布与采样点周围的居民住宅、道路交通和工矿企业的排放密切相关，表明该方法能准确地确定排放源的范围和污染来源．研究结果表明，ACCU采样系统和PIXE分析技术的优化组合可为大气污染溯源、治理和改善环境空气质量提供一种快速和准确可靠的新方法．     

Characteristics of air particulate matter and their sources inurban and rural area of Beijing, China

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｒｅｉｓａｇｒｏｗｉｎｇａｗａｒｅｎｅｓｓｔｏｔｈｅｉｍｐｏｒｔａｎｃｅｏｆａｉｒｐｏｌｌｕｔｉｏｎｉｎｍａｊｏｒｃｉｔｅｓ.Ａｎｕｍｂｅｒｏｆｓｔｕｄｉｅｓｈａｖｅｓｈｏｗｎｔｈａｔｔｈｅｃｏｎｃｅｎｔｒａｔｉｏｎｓｏｆｃｅｒｔａｉｎｔｒａｃｅｅｌｅｍｅｎｔｓｉｎｔｈｅｕｒｂａｎａｔｍｏｓｐｈｅｒｅｈａｖｅｂｅｅｎｅｌｅｖａｔｅｄｂｙ ｐｏｌｌｕｔｉｏｎ ,ａｎｄｔｈｅｒｅｆｏｒｅ ,ｔｈｅｈｉｇｈｅｓｔｃｏｎｃｅｎｔｒａｔｉｏｎｓｏｆｔｈｅｓｅｃｈｅｍｉｃａｌｃｏｎｔ…     

城市交通机动车污染控制研究进展

城市交通机动车污染问题非常复杂，在许多不可控因素，城市交通是一个动态系统，污染物排放量始终处于变化之中，控制城市交通污染，必须严格控制机动车排放，该文介绍了国内外对城市机动车污染控制研究的概况，以及几种城市中污染物扩散的模型，展望了这方面研究前发展趋势，并提出了可持续发展的效能系统设计与管理的新概念。     

Chance-constrained programming (CCP)abatement of SO_2 emission for acid deposition control in Liuzhou City

A deterministic linear programming model which optimizes the abatement of each SO2 emission source, is extended into a CCP form by introducing equations of probabilistic constrained through the incorporation of uncertainty in the source-receptor-specific transfer coefficients. Based on the calculation of SO2 and sulfate average residence time for Liuzhou City, a sulfur deposition model has been developed and the distribution of transfer coefficients have been found to be approximately log-normal. Sulfur removal minimization of the model shows that the abatement of emission sources in the city is more effective, while control cost optimization provides the lowest cost programmes for source abatement at each allowable deposition limit under varied environmental risk levels. Finally a practicable programme is recommended.     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

不同类型污染源颗粒物的粒度分布特征分析

对影响葫芦岛市城区环境质量可吸入颗粒物的各类污染源颗粒物的粒度成份、分布特征进行分析。采用斯托克直径ds（Stoke＇s Diameter）表示法，利用巴柯离心机对样品进行处理，得到各类排放源所排放的不同粒径的颗粒物重量百分比，为环境管理提供科学依据。