OPINIONS RELATING TO FLUORIDATION: DEVELOPMENT OF MEASURES1

ABSTRACT. Elected officials, technical specialists and the public are talking more about “citizen input” into the decision process, and how the people view a given issue or kind of public service. However, problem definition and valid instruments are needed before we can meaningfully predict or understand public attitude relating to a particular issue or concept. The fluoridation of community water supplies was chosen for the present methodological demonstration. This issue achieves a high level of controversy among many public segments [Crain, Katz and Rosenthal, 1969; Davis, 1959; McNeal, 1957]. By 1950, there was widespread endorsement for a national program relating to controlled water fluoridation. Yet, public acceptance of this particular technological advance has not been very high.     

间歇式加煤锅炉的烟尘测试技术探讨

针对间歇式加煤锅炉在烟尘实际测试中,最终测试结果容易出现误差的问题,通过试验,分析造成误差的主要原因和规律,提出了消除和减小误差的相应对策     

环境水样阴离子表面活性剂光度测定法

本文通过实验研究,提出了对河水及生活废水阴离子表面活性剂的水相直接测定方法,此方法具有简便、快速的特点,且有良好的准确性和再现性。     

室内空气中污染物的检测技术

室内环境空气污染对人体健康影响很大,文中指出了影响人体健康的致病因子,分析了单个微粒的光通量和粒径之间的关系。鉴于单下颗粒的散射光信号很弱,本文提出一种方法,把激光器的内腔作为颗粒注入区,利用激光器的内腔功率谱密度远大于腔外功率密度的特点,结合先进的激光散控制理论,对空气中的颗粒进行检测。     

Point Sampling Digital Imagery with ‘Samplepoint’

Measuring percent occurrence of objects from digital images can save time and expense relative to conventional field measurements. However, the accuracy of image analysis had, until now, not reached the level of the best conventional field measurements. Additionally, most image-analysis software programs require advanced user training to successfully analyze images. Here we present a new software program, ‘SamplePoint,’ that provides the user a single-pixel sample point and the ability to view and identify the pixel context. We found SamplePoint to allow accuracy comparable with the most accurate field-methods for ground-cover measurements. Expert use of the program requires minimal training and its ease of use allows rapid measurements from image data. We recommend SamplePoint for calibrating the threshold-detection level of image-analysis software or for making direct measurements of percent occurrence from digital images.     

Application of the Braun-Blanquet cover-abundance scale for vegetation analysis in land development studies

To document environmental impact predictions for land development, as required by United States government regulatory agencies, vegetation studies are conducted using a variety of methods. Density measurement (stem counts) is one method that is frequently used. However, density measurement of shrub and herbaceous vegetation is time-consuming and costly. As an alternative, the Braun-Blanquet cover-abundance scale was used to analyze vegetation in several ecological studies. Results from one of these studies show that the Braun-Blanquet method requires only one third to one fifth the field time required for the density method. Furthermore, cover-abundance ratings are better suited than density values to elucidate graphically species-environment relationships. For extensive surveys this method provides sufficiently accurate baseline data to allow environmental impact assessment as required by regulatory agencies.     

FOG DRIP IN THE BULL RUN MUNICIPAL WATERSHED,OREGON1

ABSTRACT: Net precipitation under old growth Douglas fir forest in the Bull Run Municipal Watershed (Portland, Oregon) totaled 1739 mm during a 4Cbweek period, 387 mm more than in adjacent clearcut areas. Expressing data on a full water year basis and adjusting gross precipitation for losses due to rainfall interception suggest fog drip could have added 882 mm (35 in) of water to total precipitation during a year when precipitation measured 2160 mm in a rain gage in a nearby clearing. Standard rain gages installed in open areas where fog is common may be collecting up to 30 percent less precipitation than would be collected in the forest. Long term forest management (Le., timber harvest) in the watershed could reduce annual water yield and, more importantly, summer stream flow by reducing fog drip.     

Evaluation of two models of a slipmeter

The aim of the study was to compare the performances of the Brungraber Mark II (BM II) and Mark III (BM III) slipmeters. Friction measurements with the two slipmeters were conducted in a laboratory using four footwear materials, four floor types, and three surface conditions. Both the coefficient of friction (COF) values obtained with the slipmeters and the force platform-based COF values were measured. The COF measured with the BM II was slightly higher than that measured with the BM III with a R² of 0.83. A comparison of the averaged normal force between the two slipmeters showed that the BM II generated a significantly higher normal force than the BM III at a low COF and the difference of the normal force between the two slipmeters decreased when the COF value was increased. The regression analysis results in this study showed that the force platform-based COF values were closer to the COF values obtained with the BM III than with the BM II. The R² values for the regression model between the COF values obtained from the slipmeter and the force platform were 0.90 and 0.79 for the BM II and BM III, respectively.     

三维脚型测量技术及方法的研究

本文阐述了人体脚型的测量方法及特点，比较后得出人工测量与三维扫描测量技术之间的差别。以YETI三维脚型扫描仪为模型，详细分析了脚型扫描仪的结构原理，摸索并提出了简单实用的测量方法，讨论了YETI三维脚型扫描仪获得的原始数据、脚型横截面以及脚型投影图的特点。     

Use of Scale Invariance in Evaluating Judgement Indicators

Indicators are used to draw conclusions about ecological endpoints when these endpoints cannot be measured directly. In many cases, inferences about an endpoint are only possible because assumptions have been made about the relationship between indicator and endpoint; we refer to such indicators as judgement indicators. The validity of inferences made using a judgement indicator can be gauged by examining the known or assumed form of the general relationship between indicator and endpoint. The rules for this kind of inference are a consequence of scale invariance, which originates from measurement theory. For simple indicators comprised of a single indicator measurement, the inferences allowed – equivalence, rank, equality of intervals, and equality of ratios – depend on whether the data are nominal, ordinal, interval, or ratio scaled. For composite indicators containing two or more simple indicators, inferences are also affected by the mathematical form of combination; e.g., whether the terms are summed or multiplied. Standardizing simple or composite indicators can allow inferences about the relative importance of observations, based on the natural range of occurrence. Scale invariance is a particularly important consideration in landscape assessments, since these often make use of judgement indicators.