岷江上游干旱河谷区褐土不同亚类剖面及养分特征

研究了岷江上游干旱河谷区典型地段海拔梯度上褐土的3种亚类土壤剖面及其养分特征．岷江上游干旱河谷褐土粘化作用较弱，矿物风化程度低；土壤呈碱性，pH值为7．0-9．0，富含碳酸钙的石灰性褐土达8．0-9．0；土壤表层有机质w在32．55-72．78g／kg，整个土壤剖面中全氮w0．78-4．00g／kg，全磷w0．33-0．68g／kg，全钾18．24-21．68g／kg．总的来说，褐土潜在肥力水平较高，但由于土壤水分条件的限制，土壤潜在性肥力向有效性肥力转化的能力较差，致使土壤有效性肥力水平较低．其中，土壤有效氮和有效钾w分别为25．57-24．46g／kg和研8．24-1453．65g／kg，同时由于土壤pH值和碳酸钙w较高，土壤中磷的固定较多，使得土壤有效磷w尤其偏低，为1．10-21．20g／kg．干旱河谷高海拔地区的淋溶淀积型褐土的肥力水平高于中海拔地区的石灰性褐土，低海拔地区的燥褐土肥力水平最低．土壤肥力随海拔高度升高而递增，决定了干旱河谷植被恢复从高海拔地区向低海拔地区更容易进行．表3参13     

Shifted power-law relationship between NO2 concentration and the distance from a highway: A new dispersion model based on the wind profile model

In this paper, a shifted power-law model, based on the wind profile model, had been supposed to simulate concentration gradient of nitrogen dioxide (NO₂) with distance from a highway. Field experiments were performed for NO₂ gradients from a highway in Shanghai by using passive samplers. The shifted power-law model was fitted well with experimental results of field experiments both in this study and in the literature. The results not only verified the validity of shifted power-law relationship between NO₂ concentration and the distance from a highway, but also partially demonstrated that there were some significant similarities between wind profile and air pollutants concentration profile near highway. With known concentration of chosen reference point and appropriate value of the parameter k, the model could be practically applied for predicting the NO₂ distributions near a highway. The methods of determining the parameter k were also discussed for further detailed studies.     

Profiles of PAH emission from steel and iron industries

In order to characterize the polycyclic aromatic hydrocarbons (PAHs) emission from steel and iron industries, this study measured the stack emission of twelve steel and iron plants in southern Taiwan to construct a set of source fingerprints. The study sampled the emissions by the USEPA's sampling method 5 with the modification of Graseby for the gas and particulate phase PAH and, then, used Hewlett-Packard 5890 gas chromatograph equipped with mass spectrometer detector to analyze the samples. The steel and iron industries are classified into three categories on the basis of auxiliary energy source: Category I uses coal as fuel, Category II uses heavy oil as fuel and Category III uses electric arc furnace. The pollution source profiles are obtained by averaging the ratios of individual PAH concentrations to the total concentration of 21 PAHs and total particulate matter measured in this study. Results of the study show that low molecular weight PAHs are predominant in gas plus particulate phase for all three categories. For particulate phase PAHs, however, the contribution of large molecular weight compounds increases. Two-ring PAHs account for the majority of the mass, varying from 84% to 92% with an average of 89%. The mass fractions of 3-, 4-, 5-, 6-ring PAHs in Category I are found to be more than those of the other two categories. The mass of Category III is dominated by 7-ring PAHs. Large (or heavy) molecular weight PAHs (HMW PAHs) are carcinogenic. Over all categories, these compounds are less than 1% of the total-PAH mass on the average. The indicatory PAHs are benz[a]anthracene, benzo[k]fluoranthene, benzo[ghi]perylene for Category I, benzo[a]pyrene, acenaphthene, acenaphthylene for Category II and coronene, pyrene, benzo[b]chrycene for Category III. The indicatory PAHs among categories are very different. Thus, dividing steel and iron industry into categories by auxiliary fuel is to increase the precision of estimation by a receptor model. Average total-PAH emission factors for coal, heavy oil and electric arc furnace were 4050 μg/kg-coal, 5750 μg/l-oil, 2620 μg/kW h, respectively. Carcinogenic benzo[a]pyrene for gas plus particulate phase was 2.0 g/kg-coal, 2.4 μg/l-oil and 1.4 μg/kW h for Category I, II and III, respectively.     

现代分子生物学技术在动物肠道微生物多样性研究中的应用

现代分子生物技术的蓬勃发展解决了不可培养微生物研究的难题,使得肠道微生物的研究进入一个新的阶段.本文主要介绍了基于16SrRNA的分子分析技术,包括DGGE(变性梯度凝胶电泳),TGGE(温度梯度凝胶电泳),SSCP(单链构象多态性),RFLP(限制性片段长度多态性)等肠道微生物研究工作中常用的分子生物学技术方法、适用范围及可能的发展方向,为动物肠道微生物区系的进一步研究及开发应用提供帮助.表1参42     

Robust benchmark dose determination based on profile score methods

We investigate several methods commonly used to obtain a benchmark dose and show that those based on full likelihood or profile likelihood methods might have severe shortcomings. We propose two new profile likelihood-based approaches which overcome these problems. Another contribution is the extension of the benchmark dose determination to non full likelihood models, such as quasi-likelihood, generalized estimating equations, which are widely used in settings such as developmental toxicity where clustered data are encountered. This widening of the scope of application is possible by the use of (robust) score statistics. Benchmark dose methods are applied to a data set from a developmental toxicity study.     

水环境中耐热大肠菌群的抗生素耐药性与质粒谱研究

用滤膜法、mFC培养基从5种水体中分离出疑似耐热大肠菌162株,用API微生物分析系统鉴定到种,以Kirby-Bauer法分析其对人畜常用10种抗生素的耐药性,碱裂解法小量制备各菌株质粒DNA做质粒谱分析.结果表明,埃希氏大肠杆菌为优势菌,占分离菌总数的96.3%.除分离自泉水的3株外,其它菌株都对3种及3种以上抗生素耐药,多重耐药率为98.1%.不同水体分离菌株对氧氟沙星、诺氟沙星、庆大霉素、丁胺卡那霉素、链霉素的耐药率有显著性差异(P<0.005).92株菌(56.8%)提取到大小为0.90～158.83kb、数量为1～6个的质粒,有81种质粒谱型.70株(43.2%)未提取到质粒的细菌中有67株为多重耐药.具有相同质粒谱型的菌株耐药谱都不相同.未发现质粒谱与抗生素耐药性间有明显相关性.图1表3参15     

紫色森林土壤发育特点的研究

本文通过对赤水紫色森林土壤发育特点的研究，总结出划分紫色森林土壤剖面的方法，解决了紫色森林土壤剖面划分不清楚，研究人员之间各自划分的结果不能对比的问题，为进一步研究紫色森林土壤打下了基础。     

Spatial Pattern Analysis of Regional Water Use Profile Based on the Gini Coefficient and Location Quotient

Water resources have become a barrier hampering socioeconomic development. Changes in the spatial distribution of water use profile have direct impacts to regional water use efficiency. However, the related research is inadequate, and a more suitable way to analyze regional water use profile is necessary. The Gini coefficient and location quotient, two reliable methods commonly used in discussing the spatial distribution of elements, were introduced and calculated. Taking Gansu Province as the study area, the concentration effect of industrial water use was the strongest, followed by domestic, environmental, and agricultural water use. However, a balanced distribution of agricultural water use failed to be coordinated with the production conditions, the center of Gansu’s grain production should be established to enhance the scale effect of agricultural production. The industrial agglomeration effect remained weak, and each region’s dominant industries need to be developed vigorously. Gansu’s domestic water use was consistent with its population distribution, but it is necessary to reduce the water use gap between urban and rural areas. With a growing awareness of environmental protection, environmental water use exhibited a more balanced distribution. Overall, the methods are simple and have good applicability, and the results can provide a reference in water use optimization.     

典型胶合板制造企业VOCs排放特征

通过苏玛罐采样和GC-MS/FID分析系统,测定了山东地区典型胶合板制造企业的VOCs排放特征.结果表明,烷烃（13.81%~39.16%）、含氧VOCs（5.68%~36.06%）和芳香烃（3.58%~48.12%）是热压和涂胶工艺主要排放成分,废气排口以含氧VOCs（6.49%~83.88%）排放为主,不同工艺环节的特征VOCs组分各有不同;烯炔烃（27.12%~39.38%）和芳香烃（32.47%~45.63%）是热压工艺和涂胶工艺的高OFP组分,废气排口则以含氧VOCs（52.82%）对O₃生成贡献最大;基于SOAP评估,各环节均以芳香烃类化合物（97.08%~98.03%）为主要活性组分;测得山东地区胶合板制造行业VOCs排放因子为0.89g VOCs/m³胶合板.     

我国木器涂料及汽车涂料中挥发性有机物特征

目前,工业源有机溶剂相关的实测型研究在我国鲜见报道,为摸清我国工业源有机溶剂挥发性有机物（volatile organic compounds,VOCs）含量及物种情况,提供建立我国工业源有机溶剂使用源排放清单所需的排放因子,选取我国用量均高居全球第一的木器涂料及汽车涂料开展研究.通过到企业采样及市场购买等途径获取涂料样品,按国内涂料相关标准检测方法进行测定,获取涂料中VOCs含量及成分谱,并计算其臭氧生成潜势（ozone formation potential,OFP）.结果表明,在木器涂料中,溶剂型、水性和光固化（ultra-violet,UV）涂料的平均VOCs含量（质量分数）分别为37.28%、9.88%和18.02%.汽车涂料中,水性原厂漆、溶剂型原厂漆、水性修补漆和溶剂型修补漆的平均VOCs含量分别为15.06%、59.90%、11.79%和54.50%.不同种类的涂料VOCs含量差异巨大.水性涂料的主要组分及OFP贡献者为醇醚类,溶剂型涂料的为苯系物及酯类,UV涂料的为酯类和醇醚类.涂料样品的均值均可满足现行强制性国家标准,但存在12%的溶剂型木器涂料样品和42%的溶剂型汽车原厂漆样品未达标.此外,除了水性木器涂料的苯系物超标外,其余涂料样品中规定的有害物质含量均达标.