滑行车类游乐设施动力学建模与仿真

根据滑行车类游乐设施运行速度高、加速度大、载荷工况复杂,发生事故后果非常严重的现状,认为深入的动力学分析、结构强度校核和寿命分析预测对保证其安全性尤为必要。因而分析滑行车的结构原理,提出其多体系统拓扑构型,包括轮轨关系模型、各零部件之间约束模型。运用图形学方法研究了滑行车轨道建模参数提取和坐标变换技术。通过仿真分析,在设计阶段就可获得滑行车在不同工况下运行时各部件的速度、加速度及载荷时间历程,为结构设计、安全性评估提供可靠依据。实例表明,分析结果与实测数据非常接近,所提出的建模方法是可行的。     

薄层色谱紫外分光光度法定量测定微生物发酵产物辅酶Q10

报道了一种微生物发酵液中辅酶Q10的定量检测方法.该方法分为两个步骤:第一步是离心收集菌体和结合使用超声波处理的辅酶Q10丙酮抽提;第二步是硅胶薄层色谱,根据标样位置取产物斑点乙醇洗脱后用紫外分光光度法测定辅酶Q10含量.结果表明,该方法具有操作简便、重复性好、相对误差小等优点,可用于细菌发酵生产辅酶Q10研究过程中发酵产物的快速定量检测.图2表2参6     

关于区域可持续发展的系统分析

本文从更高、更新、更综合的高度和角度,对区域社会可持续发展系统进行了单元要素分析、结构层次分析。提出了三单元要素、三结构层次、三种发展类型的设想。这种分析尽管还是初步的、定性的、不很深刻的,但是为研究可持续发展系统提供了一种新的思路。     

Nanocomposites of Cellulose Acetate Butyrate Reinforced with Cellulose Nanocrystals

Nanocrystals were prepared by acid hydrolysis of bacterial cellulose microfibrils. These were topochemically trimethylsilylated, in an attempt to reduce their hydrophilicity. Composites were made by dispersing either native or silylated crystals in cellulose acetatebutyrate matrixes and solution casting of the dispersions. Particles were characterized by transmission electron microscopy. The composites were characterized by differential scanning calorimetry and dynamic mechanical analysis. The unmodified cellulose crystals exhibited better reinforcement characteristics than the trimethylsilated crystals.     

Structure of pathways in ecological networks: relationships between length and number

In ecosystems network, structure determines adjacent (direct) and non-adjacent (indirect) pathways over which energy, matter, and information can flow. The more pathways, the more possible ways the conservative substance can move in zero-sum transactions between network nodes that the pathways interconnect, and the more possible non-conservative, nonzero-sum relations can be secondarily derived from these. Structural analysis is a tool we employ, from a family of input–output methods for exploring zero- and nonzero-sum attributes of environmental networks, to count pathways of varying length between network nodes. In this paper, we examine the relationship between pathway length (k) and number (P_k) as determined by system size (n, number of nodes) and extent and pattern of connectance (C). We develop a measure (m_a) of pathway growth in numbers with increasing length, and then normalize this to the maximum rate possible (m_a/m_c) for a given system size. These measures apply to two pathway types—paths, m_a(0) and m_a(0)/m_c(0), which forbid adjacent node repetitions, and walks, m_a(1) and m_a(1)/m_c(1), which allow them. We find that network size has a curvilinear effect on the pathway number versus length relationship, and extent and pattern of connectance are convolved. Values computed for the paths and walks of three ecosystem models (oyster reef, freshwater marsh, and reservoir cove) are used to compare their pathway structure.     

圆锥形零件冲压成形过程分析

通过分析圆锥形零件变形毛坯上不同部分在成形中的作用,揭示了该类零件的冲压成形特点,得出了悬空侧壁部分的变形状态是该类零件成形的关键,而径向拉应力是实现侧壁部分成形的必要条件,同时也是这部分冲压成形成败的关键。为此,经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式,为进一步研究提供了理论基础。     

控制论在企业环境管理中的应用

在企业环境管理运用控制论实施污染防治全过程控制，来提高清洁生产水平，降低物耗，能耗，提高资源利用率，完善保护环境的自我约束机制，落实环境综合整治定量考核，以达到发展生产，提高经济效益和改善环境的目的。     

上海市经济-环境系统的物质输入分析

对区域或城市经济-环境系统的物质输入分析。可以判断可持续发展所处的状态。进而为区域或城市制定循环经济发展战略提供依据。利用物质流的理论和方法．依据欧盟指导原则，分析了1990—2003年间上海市经济-环境系统的物质总需求和资源生产率等主要指标。研究结果表明：①上海市巨大的物质总需求和直接物质消耗给上海市的生态环境带来了巨大的压力；②1996年上海市的资源生产率是全国的1．22倍．但2000年日本的资源生产率是上海市的36倍；③影响上海市的物质总需求或者环境质量的关键因素是技术和制度能力。在上述的分析基础上。提出在2020年之前上海市发展循环经济要注重于输入端的减物质化和加强循环绍济的技术支撑研究与开发以及制度能力建设。     

An air quality forecasting system in Beijing - Application to the study of dust storm events in China in May 2008

An air pollution forecast system, ARIA Regional, was implemented in 2007-2008 at the Beijing Municipality Environmental Monitoring Center, providing daily forecast of main pollutant concentrations. The chemistry-transport model CHIMERE was coupled with the dust emission model MB95 for restituting dust storm events in springtime so as to improve forecast results. Dust storm events were sporadic but could be extremely intense and then control air quality indexes close to the source areas but also far in the Beijing area. A dust episode having occurred at the end of May 2008 was analyzed in this article, and its impact of particulate matter on the Chinese air pollution index (API) was evaluated. Following our estimation, about 23 Tg of dust were emitted from source areas in Mongolia and in the Inner Mongolia of China, transporting towards southeast. This episode of dust storm influenced a large part of North China and East China, and also South Korea. The model result was then evaluated using satellite observations and in situ data. The simulated daily concentrations of total suspended particulate at 6:00 UTC had a similar spatial pattern with respect to OMI satellite aerosol index. Temporal evolution of dust plume was evaluated by comparing dust aerosol optical depth (AOD) calculated from the simulations with AOD derived from MODIS satellite products. Finally, the comparison of reported Chinese API in Beijing with API calculated from the simulation including dust emissions had showed the significant improvement of the model results taking into account mineral dust correctly.     

全国大气扩散输送模态与区划研究

基于NCEP再分析气象资料,使用HYSPLIT模式对我国大陆区域进行了一整年的连续轨迹计算.轨迹以1°×1°的网格化经纬度分辨率进行计算.考虑气候、地理及经济因素,将全国计算区域分为10个大区,分别统计各大区出发的轨迹在全国的分布频率.根据全年和各季的轨迹统计结果,分析我国不同区域的大气输送扩散特征以及区域间大气环境的相互影响潜势.结果表明,全国10个大区的大气扩散输送模态可分为特性不同的7大类,其中以西北方向的3个大区为一类,西南高原的2个大区为另一类,其它各区自成一类.10个大区大气扩散物质的累积效应差异显著且季节变化特征各异.全国以西南区(XN)东部大气累积效应最强,东北区(DB)累积效应最弱.