Comparative chemical analysis of some traditional Omani-made kohl

Fourteen different types of Omani-made kohl were collected from different locations in Oman. The kohl samples were analyzed using different analytical techniques including X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray microanalysis, and inductively coupled plasma mass spectroscopy after sample digestion. The results show that six kohls (kohls 1–6) are mineral-based, four of which, namely lasif, cold ethmid, hot ethmid, and original ethmid, contain very high levels of Pb (basically galena). The other two kohls (red ethmid and black ethmid) contain mostly iron (hematite, magnetite, and goethite). The other kohl samples (kohls 7–14) are basically amorphous carbons, one of which is made by charring date stones while the rest are basically soot collected from burning different materials. Compared to the results obtained by inductively coupled plasma mass spectroscopy, energy-dispersive X-ray microanalysis yielded higher concentrations of major elements while some minor elements were not detected; this is probably related to some limitations in the latter technique. Based on this study, carbon-based kohls possess much lower levels of toxic elements than mineral-based kohls; consequently, the former can be considered as the less hazardous kohls. However, concerns about the use of soot in cosmetics are rising because of the presence of some carcinogenic compounds such as polyaromatic hydrocarbons in soot.     

Estimation of daily intake of potentially toxic elements from urban street dust and the role of oral bioaccessibility testing

The pseudo-total and oral bioaccessible concentration of six potentially toxic elements (PTEs) in urban street dust was investigated. Typical pseudo-total concentrations across the sampling sites ranged from 4.4 to 8.6 mg kg⁻¹ for As, 0.2-3.6 mg kg⁻¹ for Cd, 25-217 mg kg⁻¹ for Cu, 14-46 mg kg⁻¹ for Ni, 70-4261 mg kg⁻¹ for Pb, and, 111-652 mg kg⁻¹ for Zn. This data compared favourably with other urban street dust samples collected and analysed in a variety of cities globally; the exception was the high level of Pb determined in a specific sample in this study. The oral bioaccessibility of PTEs in street dust is also assessed using in vitro gastrointestinal extraction (Unified Bioaccessibility Method, UBM). Based on a worst case scenario the oral bioaccessibility data estimated that Cd and Zn had the highest % bioaccessible fractions (median >45%) while the other PTEs i.e. As, Cu, Ni and Pb had lower % bioaccessible fractions (median <35%). The pseudo-total and bioaccessible concentrations of PTEs in the samples has been compared to estimated tolerable daily intake values based on unintentional soil/dust consumption. Cadmium, Cu and Ni are well within the oral tolerable daily intake rates. With respect to As and Pb, only the latter exceeds the TDI_oral if we model ingestion rate based on atmospheric ‘dustiness’ rather than the US EPA (2008) unintentional soil/dust consumption rate of 100 mg d⁻¹. We consider it unlikely that even a child with pica tendencies would ingest as much as 100 mg soil/dust during a daily visit to the city centre, and in particular to the sites with elevated Pb concentrations observed in this study.     

Persistent organochlorine contaminants in hair samples of Northern Poland population, 1968-2009

The European regulation on chemicals, REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals), came into force on 1 June 2007. With pre-registration complete in 2008, data for these substances may provide an overview of the expected chemical space and its characteristics. In this paper, using various in silico computation tools, we evaluate 48 782 neutral organic compounds from the list to identify hazardous and safe compounds. Two different classification schemes (modified Verhaar and ECOSAR) identified between 17% and 25% of the compounds as expressing only baseline toxicity (narcosis). A smaller portion could be identified as reactive (19%) or specifically acting (2.7%), while the majority were non-assigned (61%). Overall environmental persistence, bioaccumulation and long-range transport potential were evaluated using structure-activity relationships and a multimedia fugacity-based model. A surprisingly high proportion of compounds (20%), mainly aromatic and halogenated, had a very high estimated persistence (>195 d). The proportion of compounds with a very high estimated bioconcentration or bioaccumulation factor (>5000) was substantially less (6.9%). Finally, a list was compiled of those compounds within the applicability domain of the models used, meeting both persistence and bioaccumulation criteria, and with a long-range transport potential comparable to PCB. This list of 68 potential persistent organic pollutants contained many well-known compounds (all halogenated), but notably also five fluorinated compounds that were not included in the EINECS inventory. This study demonstrates the usability of in silico tools for identification of potentially environmentally hazardous chemicals.     

Direct spectral analysis and determination of high content of carcinogenic bromine in bread using UV pulsed laser induced breakdown spectroscopy

Laser induced breakdown spectroscopy (LIBS) was applied for the detection of carcinogenic elements like bromine in four representative brands of loaf bread samples and the measured bromine concentrations were 352, 157, 451, and 311 ppm, using Br I (827.2 nm) atomic transition line as the finger print atomic transition. Our LIBS system is equipped with a pulsed laser of wavelength 266 nm with energy 25 mJ pulse^?1, 8 ns pulse duration, 20 Hz repetition rate, and a gated ICCD camera. The LIBS system was calibrated with the standards of known concentrations in the sample (bread) matrix and such plot is linear in 20–500 ppm range. The capability of our system in terms of limit of detection and relative accuracy with respect to the standard inductively coupled plasma mass spectrometry (ICPMS) technique was evaluated and these values were 5.09 ppm and 0.01–0.05, respectively, which ensures the applicability of our system for Br trace level detection, and LIBS results are in excellent agreement with that of ICPMS results.     

Comprehensive quality assessment of municipal organic waste composts produced by different preparation methods

In the first part of this work, the effect of municipal organic waste (MOW) composts on plant growth was evaluated in a greenhouse trial. The treatments included soil amended with 14 different composts (prepared by shredding, adding wood shavings, cocomposting with biosolids or vermicomposting), an inorganically fertilized soil, and a control soil. All of the treatments significantly increased plant growth compared to the control, and yields of three of the amended treatments were as high as that of the inorganic fertilizer treatment. When comparing differently prepared composts to the conventional compost, it was found that cocomposting MOW with biosolids was the method which most positively influenced yields (26-41% yield increases). In the second part of this work, we evaluated the effects of the different preparation methods on compost quality, using a multivariate approach. Three main quality aspects were considered collectively in a principal component analysis: organic matter and nutrient concentrations, degradability and capacity to mineralize these nutrients, and plant growth. The model was restricted to the first and second components (PC1 and PC1) which accounted for 94% of data variance. On the resulting factorial plane, four groups were distinguished. Each of the groups was compared to the reference compost to determine quality increases or decreases. Based on this analysis, it was found that cocomposting MOW with biosolids produced the highest quality products (higher total nutrient and OM concentration, nutrient mineralization potential, and plant growth). Addition of wood shavings increased OM concentration, but reduced quality in terms of the other aspects studied. Shredding was only effective to increase product quality when it was not combined with other methods, whereas vermicomposting only increased quality when MOW was not mixed with biosolids.     

A/O_1/H/O_2工艺处理焦化废水硝化过程的实现及其抑制

针对焦化废水中的有毒污染物会对敏感易受干扰的硝化细菌产生不利影响从而破坏硝化过程稳定性的现象,采用A/O1/H/O2工艺处理焦化废水的实际工程为研究对象,根据工程运行的水质监测数据分析,发现几种主要污染物的浓度变化会对二级好氧段的硝化过程产生抑制影响。序批式毒性抑制实验结果表明,苯酚、硫氰化物和喹啉对硝化过程具有毒性抑制作用,半抑制浓度EC50分别为34.26、278.5和73.24 mg/L。当二级好氧工艺段运行正常时(C/N约4.3/1,pH8～8.5,DO 4～4.5 mg/L),出水氨氮浓度可低于5 mg/L,是由于焦化废水经厌氧/好氧/水解工艺后毒物浓度大幅下降,毒性得到削减,表明焦化废水生物处理A/O1/H/O2组合流化床工艺具有较强抵抗毒物抑制并实现高效的硝化作用。     

饮用水源地痕量有毒有害污染物环境健康风险评价

水源地环境污染的健康风险包括化学物的致癌风险、躯体损害风险和辐射伤害风险,通过各自的剂量-反应关系,可建立3类风险的计算模型。在对部分参数进行适应性调整的基础上,运用这些模型对扬州市四水厂进行了分析评价。结果表明,该水源地水体中痕量有毒有害污染物所致健康危害总风险值为4.87×10-8a-1,远低于EPA推荐的风险限值,削减具有潜在致癌效应的卤代烃类排放是控制风险的关键。