Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Characterization of extracellular polymeric substances in the biofilms of typical bacteria by the sulfur K-edge XANES spectroscopy

A combined approach of physicochemical extraction and sulfur K-edge X-ray absorption near-edge structure（XANES） spectroscopy was applied to characterize the extracellular polymeric substances（EPS） of typical bacterial biofilms in this study. Physicochemical analysis showed variation of the contents of DNA,polysaccharide and protein in different fractions of EPS in different mediums. The sulfur K-edge XANES analysis yielded a variety of spectra.Spectral fitting of the XANES spectra utilizing a large set of model compounds showed that there was more reduced sulfur in both LB-EPS（loosely bound EPS） and TB-EPS（tightly bound EPS） of all the biofilms in LB medium than in R2 A medium. More oxidized sulfur was identified in LB-EPS than that in TB-EPS,suggesting different niches and physiological heterogeneity in the biofilms. Our results suggested that the sulfur K-edge XANES can be a useful tool to analyze the sulfur speciation in EPS of biofilms.     

羟基铝及复合改性蒙脱石对As(Ⅴ)的去除性能

采用无机羟基铝及阳离子表面活性剂十六烷基三甲基溴化铵对天然蒙脱石进行无机及复合改性.在吸附过程中研究了反应时间、投加量和pH等变量对吸附性能的影响,同时进行吸附动力学及吸附等温线研究,吸附规律符合Langmuir等温方程式.采用X射线衍射、X射线荧光、傅里叶红外光谱等表征手段对未改性及改性蒙脱石进行性能表征.研究结果表明,羟基铝及复合改性蒙脱石对As(Ⅴ)具有良好的吸附性能,在pH为4～10,初始砷浓度为2 mg/L,改性蒙脱石对As(Ⅴ)的去除率接近99％.吸附机理主要为羟基铝表面络合吸附和静电吸附.     

Ce-PbO_2/C电极的制备及其去除水中酸性红B

采用电沉积法制备铈修饰的PbO2/C电极,通过SEM、XRD、XPS及循环伏安对PbO2/C、Ce-PbO2/C电极进行表征,结果表明,Ce-PbO2/C电极比PbO2/C颗粒细小,表面均匀致密,电化学氧化能力较强,修饰电极中Ce以CeO2的形态存在。以Ce-PbO2/C为工作电极,电解浓度为1 000 mg/L的高盐酸性红B模拟活性染料废水,考察了电压、pH、电解质浓度、极间距对脱色率、氨氮去除率及COD去除率的影响。确定适宜工艺条件为：初始酸性红B溶液浓度为1 000 mg/L,pH值为6,电压10 V,电解时间1 h,电极间距1.5 cm,该条件下脱色率、氨氮去除率和COD去除率分别为99.98%、97.23%和90.17%。通过UV-Vis及GC-MS初步分析了降解过程可能存在的中间产物及降解途径。     

人脸识别技术在智能视频监控系统中的应用

首先对监控技术的发展过程做了简单的总结,然后介绍了人脸识别技术的研究方向、应用领域及技术优势,并针对人脸识别技术在视频监控系统中应用的架构、关键技术和算法做了有益的探讨,特别对矫正有旋转角度的人脸图像技术做了较为详尽的表述,最后得出结论,人脸识别技术可以应用于监控系统中.而基于人脸识别技术的智能视频监控系统应该具有十分广泛的应用前景.     

碱熔融法合成NaA和NaX型粉煤灰沸石的品质表征

以粉煤灰为原料采用碱熔融法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构、性能和应用指标进行了详细表征.经x射线衍射和IR光谱分析,表明合成产物是无杂晶生成的NaA和NaX型沸石相;在扫描电镜观察下,产物分别具有NaA和NaX型沸石的立方体和八面体晶体骨架结构.DTA分析表明了合成产物中沸石水的存在,且产物热稳定性较好.通过对比,粉煤灰合成的NaA和NaX型沸石的比表面积达到了相应商品沸石的66.9%和83.6%;孔容为41.1%和70.2%;阳离子交换容量(CEC,cation exchange capacity)为82.93%和84.31%.通过比较化学组成表明,大规模应用合成产物不会对环境造成危害.     

基于二值逻辑的复合绝缘子状态判别策略研究

复合绝缘子是架空输电线路上广泛使用的设备,它的老化会给电力系统的正常运行带来威胁。电力相关工作人员需要一种能够对复合绝缘子的运行状态进行判别的方法,帮助他们确定复合绝缘子是否满足运行要求,而对复合绝缘子的定性表征就成为一种优选的表征策略。将运行后的复合绝缘子分成"满足运行要求"和"不满足运行要求",使用二值逻辑回归模型,选取合适的特征量,建立了复合绝缘子状态表征体系。     

新型催化剂BiOI粉末的低温制备及其光催化性能研究

通过低温法制备Bi OI粉末,运用SEM、XRD和DRS对制备产物进行表征。结果显示Bi OI结晶度好、粒径小、比表面积大、可见光利用强。以甲基橙为主要目标物,对其在可见光下进行光催化降解研究。实验表明:在可见光下,p H=5.5,甲基橙初始浓度为20mg/L,Bi OI投加量为0.20g/L时,综合降解效果最好,210min光降解率可达80%;相同条件下,Bi OI降解直接黑、甲基紫、刚果红染料都有良好的效果,说明Bi OI拥有一定的应用前景。     

载体酸处理对CuMnCeOx/堇青石微波催化燃烧甲苯性能的影响

针对堇青石载体比表面积小、活性组分分散程度低等问题,本研究使用盐酸对蜂窝状堇青石载体进行酸蚀处理以增大其比表面积.在采用等体积浸渍法制备CuMnCeO_x/酸蚀堇青石催化剂的基础上,开展了微波催化燃烧甲苯试验以考察酸处理对催化剂活性的影响,同时对CuMnCeO_x/堇青石与CuMnCeO_x/酸蚀堇青石催化剂进行BET、SEM、PSDA和XRD等表征测试.结果表明,堇青石载体的比表面积由酸蚀前的0.153 m²·g^-1提高至酸蚀后的1.024m²·g^-1;酸蚀未改变堇青石载体的晶体结构,同时CuMnCeO_x/酸蚀堇青石活性组分的特征峰相较于CuMnCeO_x/堇青石催化剂有所增多.在处理气量为0.12m³·h^-1、甲苯初始浓度为1000 mg·m^-3和床层温度为160℃的反应条件下,CuMnCeO_x/酸蚀堇青石催...