利用FLEXPART模式反演中国区域SF6排放量

六氟化硫(SF_6)是一种长寿命卤代温室气体,被列为《京都议定书》限排物种.随着经济高速发展,中国的SF6排放量受到世界各国的关注.采用传统的"自下而上"清单方法估算SF6排放量时,所需排放因子、活动水平数据的准确性和时效性存在较大局限.因此,本文利用拉格朗日粒子扩散模式FLEXPART,结合2009年北京上甸子区域大气本底站SF6浓度观测资料,尝试建立中国区域SF6排放量的反演方法.结果表明,初步反演的2009年中国区域SF6排放量为1.25×103(0.53×103~1.97×103)t·a-1,与文献结果相当,源排放量的不确定性从1.05×103t·a-1减小到0.72×103t·a-1.与先验源相比,反演源的相关系数从0.37提高到0.43,均方根误差减小了2.64%.     

BiOBr/Bi2MoO6异质结的构筑及对甲基橙的吸附/光催化性能的协同作用机制

采用简单的沉积-沉淀法合成了BiOBr/Bi_2MoO_6(BOB/BMO)异质结,采用XRD、XPS、TEM、SEM、EDS、FT-IR、UV-Vis-DRS、PL、PC和EIS等测试技术对光催化剂的物相组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物甲基橙(MO)的吸附和光催化降解作为探针来评价BiOBr/Bi_2MoO_6异质结的吸附性能与光催化活性增强机制.SEM和TEM分析结果表明,所得Bi_2MoO_6微球由大量厚度约为20~50 nm的纳米片组成;沉淀-沉积法所得样品的形貌分析显示,尺寸约为10 nm的BiOBr量子点均匀沉积在Bi_2MoO_6微球表面,形成的新颖的BOB/BMO异质结.N2吸附/脱附结果表明,Bi_2MoO_6和BiOBr形成异质结具有大的比表面积(64.94 m2·g-1),且表面孔结构丰富.吸附/光催化降解实验结果表明,与纯Bi_2MoO_6或者BiOBr相比,BOB/BMO异质结表现出更好的吸附性能和光催化活性.吸附/光催化协同作用机理分析表明,BOB/BMO异质结具有大的比表面积和丰富的孔结构是其吸附性能增强的主要原因.此外,光致发光(PL)谱、光电流(PC)和交流阻抗(EIS)分析进一步揭示了BOB/BMO异质结有利于光生载流子的分离与转移,导致光催化活性增强,二者的协同作用使其对MO具有优越的去除性能.此外,BOB/BMO异质结较稳定,重复使用性能良好,有望用于MO废水的实际处理.     

The legitimation of contested carbon markets after Paris – empirical insights from market stakeholders

ABSTRACT

After the Paris Agreement the global carbon offset markets face regulatory uncertainty and new legitimation challenges. This paper examines the discursive legitimation of the carbon markets between 2015 and 2018 and is based on 37 qualitative interviews with market stakeholders. The results show that the carbon markets remain contested and require new ideas and concepts to construct legitimacy. Some stakeholders consider moving beyond carbon offsetting, mainly due to new risks of double counting. Others continue to portray carbon offsetting as a ‘false solution’. Nevertheless, the trust in carbon markets as an appropriate way to address climate change remains high. Therefore, new forms of international emission trading are likely to evolve under Article 6 of the Paris Agreement.     

Radiation Effects on Blends of Poly(ε-Caprolactone) and Diatomites

Poly(-caprolactone) (PCL) was blended with diatomaceous earth (diatomite) and irradiated with -rays to introduce cross-linking between PCL molecules or both components. The unwashed diatomite containing a little of a volatile component showed high efficiency of introduction of cross-linking, whereas that with no volatile component showed low efficiency of introduction of cross-linking. Elongational viscosity, melt viscosity, and modulus of PCL/diatomite blend irradiated at various doses were significantly improved. Enzymatic degradation of the PCL/diatomite blend became faster than that of the PCL, though that of the blend irradiated became slower.     

Morphophysiological Rearrangements in Fish in Response to Pollution (in the Light of S.S. Shvarts' Theory)

The results of a study on morphophysiological variation in fish inhabiting a subarctic lake exposed to chronic industrial pollution are described using an example of cisco, Coregonus lavaretus. It is shown that indices of the heart, liver, kidneys, gills, and fatness in these fish are increased significantly and have retained increased values for the past 20 years. The observed changes are analyzed on the basis of biochemical data. The results of studies on the dynamics of hematological parameters in fish are used for characterizing the development of toxicosis. Adaptive rearrangements associated with an increase in the metabolic rate and the activation of protective systems in the fish are explained in the context of S.S. Schvarts' concept. The idea is proposed that the additional energy cost of detoxification may be responsible for morphophysiological variation in fish under conditions of water pollution.     

从6-APA和7-ADCA生产废液中回收苯乙酸

采用溶剂萃取、水法提取等方法从6-氨基青霉烷酸和7-氨基-3-去乙酰氧基头孢烷酸生产废液（简称废液）中回收苯乙酸（PAA）,考察了各种因素对回收效果的影响。实验结果表明：以甲苯为萃取剂,在萃取温度30℃、萃取时间15m in、500mL废液中萃取剂加入量130mL的最佳条件下,萃取率为96.5%;在提取温度为65℃左右、结晶温度低于10℃的条件下,PAA收率大于89%,纯度大于99%;所得PAA产品质量好,可用于青霉素G等医药产品的生产。     

钠盐量影响下DD6单晶高温合金的高温热腐蚀规律研究

目的 开展镍基单晶高温合金DD6在950 ℃下的热盐腐蚀试验(95%Na2SO4+5%NaCl)，探明涂盐量和涂盐方式(周期涂盐和单次涂盐)对DD6高温热腐蚀的影响规律和机理。方法 结合扫描电子显微镜、X射线能量色散谱、X射线衍射等设备，对不同涂盐量及涂盐方式下DD6的表面及横截面形貌进行观察分析，分析不同涂盐量和涂盐方式下DD6的高温热腐蚀机理。结果 DD6在950 ℃下主要发生碱性熔融热腐蚀，同时伴随氧化、硫化和氯化等过程。高温热腐蚀使得DD6合金表面生成的保护性氧化膜被熔融态的腐蚀介质破坏，导致O、S、Cl等外部元素通过氧化膜的缺陷进入DD6基体中，在合金的亚表面发生内氧化、内硫化以及内氯化反应，横截面上出现明显的腐蚀层，其主要由氧化物以及硫化物组成。随着热腐蚀的进行，DD6表面物质发生了剥蚀，沉积盐量的增加导致剥蚀现象越加严重，合金内部致密的组织结构也被破坏，横截面上出现了大量孔洞、裂纹等缺陷。在相同涂盐量下，周期涂盐法使得DD6的腐蚀程度高于单次涂盐法。结论 DD6高温热腐蚀行为与涂盐量及涂盐方式密切相关，相同涂盐方式下，涂盐量越大，DD6热腐蚀更加严重。涂盐量一定时，周期涂盐法使得DD6的热腐蚀剧烈程度大于单次涂盐法，且DD6在上述热腐蚀条件下均发生剥蚀破坏。     

Bi2MoO6/纳米棒ZnO异质结对MB的可见光-压电协同降解性能研究

采用水热法合成了一系列不同负载率的Bi₂MoO₆/纳米棒ZnO复合光催化剂.通过XRD、FT-IR、SEM、TEM、XPS、UV-Vis、EPR和PL等分析技术对合成的样品进行表征.在光/超声波条件下,以亚甲基蓝（MB）为目标降解物评价其压电-光催化性能.结果表明：Bi₂MoO₆/ZnO纳米棒（BZ-0.6）的降解速率常数约为ZnO传统光催化的9.25倍,其性能提升的主要原因在于ZnO的压电效应与Bi₂MoO₆/ZnO界面形成的异质结的耦合,有效地促进了电子和空穴的分离和转移.此外,同实验条件下,循环利用5次后Bi₂MoO₆/ZnO复合光催化剂降解率仍保持良好的稳定性.     

多尺度分割与特征优选下的盐碱地提取

土地盐渍化作为一种土壤灾害,严重制约着社会经济与农业的发展。对盐碱地进行实时监测,可为盐碱地的评价改良提供科学依据。由于盐碱地的信息复杂、提取精度不高,因此本文以高分六号（GF-6）卫星遥感影像为数据源,采用分形网络演化算法（fractal net evolution approach,FNEA）进行影像对象的多尺度分割,从面向对象的角度减少高分影像分类结果中的椒盐噪声问题,通过计算图像对象的局部方差和变化率来确定适宜的盐碱地分割尺度。利用基于特征选择的相关性算法（correlations-based feature selection,CFS）与Relief F算法分别对由光谱、纹理、形状、遥感指数构成的初始特征空间进行特征优选,精简特征子集,解决特征数量冗余问题,以此来优化随机森林对盐碱地提取精度。结果表明：CFS约简后的特征子集更小,精度更高,说明在盐碱地提取过程中,筛选特征数目能够减小冗余数据对提取精度的影响。CFS优化后的随机森林对盐碱地的提取效果较好,该方法总体分类精度达到83.7%。