Long-Term Effect of Instream Habitat-Improvement Structures on Channel Morphology Along the Blackledge and Salmon Rivers, Connecticut, USA

Habitat-improvement structures on the Blackledge and Salmon rivers date back to the 1930s and 1950s. Forty of these structures were investigated to determine their long-term impact on channel morphology. These structures include designs that continue to be used in modern restoration efforts. During the intervening period since these structures were introduced, several major floods have affected the two channels. The floods include three flows in excess of the 50-year event, including the flood of record, which has an estimated recurrence interval of almost 300 years. Despite the extreme flooding, many structures were discovered in varying conditions of operation. Grade-control structures and low-flow deflectors generally create some low-flow habitat (P = 0.815) but do not produce the depth of water predicted by design manuals (P < 0.0001). Unintended erosion has developed in response to many of the channel modifications especially along the outside of meanders. In addition, the mode of failure of grade-control structures has created localized channel widening with associated bank erosion. Meanwhile, cover structures have produced a 30% reduction in streamside vegetation with over 75% less overhead cover than unaltered reaches. Based on these results, it is important for prospective designers to carefully consider the long-term impacts of instream structures when developing future channel-restoration projects.     

Utilization of cement kiln dust (CKD) in cement mortar and concrete—an overview

Solid waste management is one of the major environmental concerns around the world. Cement kiln dust (KKD), also known as by-pass dust, is a by-product of cement manufacturing. The environmental concerns related to Portland cement production, emission and disposal of CKD is becoming progressively significant. CKD is fine-grained, particulate material chiefly composed of oxidized, anhydrous, micron-sized particles collected from electrostatic precipitators during the high temperature production of clinker. Cement kiln dust so generated is partly reused in cement plant and landfilled. The beneficial uses of CKD are in highway uses, soil stabilization, use in cement mortar/concrete, CLSM, etc.Studies have shown that CKD could be used in making paste/mortar/concrete. This paper presents an overview of some of the research published on the use of CKD in cement paste/mortar/concrete. Effect of CKD on the cement paste/mortar/concrete properties like compressive strength, tensile strength properties (splitting tensile strength, flexural strength and toughness), durability (Freeze–thaw), hydration, setting time, sorptivity, electrical conductivity are presented. Use of CKD in making controlled low-strength materials (CLSM), asphalt concrete, as soil stabilizer, and leachate analysis are also discussed in this paper.     

Radiation Effects on Blends of Poly(ε-Caprolactone) and Diatomites

Poly(-caprolactone) (PCL) was blended with diatomaceous earth (diatomite) and irradiated with -rays to introduce cross-linking between PCL molecules or both components. The unwashed diatomite containing a little of a volatile component showed high efficiency of introduction of cross-linking, whereas that with no volatile component showed low efficiency of introduction of cross-linking. Elongational viscosity, melt viscosity, and modulus of PCL/diatomite blend irradiated at various doses were significantly improved. Enzymatic degradation of the PCL/diatomite blend became faster than that of the PCL, though that of the blend irradiated became slower.     

Influences of Magnesium <Emphasis Type="Italic">tri-</Emphasis>Silicate on the Physical,Mechanical, and Degradable Properties of Ultraviolet (UV) Radiation Cured Plain Board Surface

A series of formulations were prepared with different percentages of oligomer, epoxy diacrylate (EA-1020 ), monomer, 1,6 Hexane diol diacrylate,(HDDA) and different percentages of filler (Magnesium tri-silicate, Mg₂Si₃O₈). Irgacure 369 [2-Benzyl-2-dimethyl-amine-1 (4-morpholinophenyl) butanone-1] was used in the formulations as photoinitiator. Ultraviolet (UV) cured thin polymer films were prepared from these formulating solutions on clean glass plates. Pendulum hardness (PH), gel content and macro scratch hardness (MSH) of the UV cured films were studied. One percent Mg₂Si₃O₈ containing formulation showed the premium properties. The substrates (plain board) were coated by these formulating solutions and cured under the same UV lamp at different intensities of radiation. Various properties of the coated surface such as PH, gloss, adhesion, abrasion and MSH were investigated. The base coat containing 1% Mg₂Si₃O₈ and top coat containing 48% HDDA produced the best performance among all the formulations inspected. The degradable properties in different weathering conditions on PH, gloss, adhesion, abrasion and MSH were measured. The surface cured with the optimized formulation (E) again yielded the minimum loss of the properties.     

提高节理面c和φ对岩坡开挖变形的影响

为了反映岩质边坡在节理面注浆后的变形效应,首先,通过室内试验,分析注浆前后岩体变形和破坏的全过程,以探讨其抗剪性能(粘结力c和内摩擦角φ)的变化;然后,基于理想弹塑性本构模型的Mohr-Cou-lomb准则,运用拉格朗日元数值方法(FLAC3D),对岩坡注浆前后变形效应(水平位移、垂直位移、剪应变增量)进行模拟。结果表明:注浆加固后,岩体的位移场变得均匀和连续,节理面处的较大位移受到抑制,边坡的整体性得到提高,有利于边坡的稳定性。     

Effect of Recycling on Material Properties of Glass-filled Polyethylene Terephthalate

Recycled plastics are considered low performance materials because their properties are expected to decrease drastically with recycling. The objective of this study was to characterize a 15 wt.% glass filled polyethylene terephthalate (rPET-15GF) using six recycle generations and four recycle ratios. Mechanical properties such as tensile strength, elastic modulus, and percent elongation to failure of the PET composite were determined for various recycle generations and recycle ratios. Results show that the mechanical properties of rPET-15GF decrease slightly per recycle generation. In contrast, thermal properties of rPET-15GF were not at all affected by the recycling process. This data demonstrates that recycled glass filled PET can be used effectively to fabricate components without significantly affecting their mechanical performance.     

睫毛萼凤仙花响应土壤水分和竞争的表型可塑性

研究了睫毛萼凤仙花在干、湿两种土壤水分条件下和密、疏两种栽种密度条件下形态和生长的表型可塑性。睫毛萼凤仙花在土壤水分饱和条件下的形态参数和生物量积累都高于干旱条件,在稀疏栽植下的形态参数和生物量积累也高于密集栽种。睫毛萼凤仙花通过调整器官生物量分配和形态参数来适应不利的环境,但付出了减少后代数目的代价。睫毛萼凤仙花适宜在土壤水分充足、植株密度不高的生境中生长。     

西庄河流域土地利用方式对土壤肥力影响的研究

采用野外调查、取样和实验分析相结合的方法对云南省保山市西庄河山地流域内4种主要土地利用方式（林地、耕地、茶园、灌丛）的土壤理化性质进行对比研究，讨论了不同土地利用方式对土壤肥力的影响，结果表明，不同的土地利用方式对土壤肥力具有比较明显的影响：土壤有机质和全氮质量分数变化从大到小依次为灌丛＞林地＞茶园＞耕地；磷、钾元素表现为耕地＞茶园＞林地＞灌丛；土壤阳离子交换量表现为耕地＞茶园＞灌丛＞林地；盐基饱和度表现为耕地＞灌丛＞林地＞茶园；农业耕作活动对表层土壤物理性质影响明显。     

纤维藻(Ankistrodesmus sp.)对镍的吸附、吸收作用及镍对其细胞形态结构影响

纤维藻（Ankistrodesmussp.）对镍毒作用反应敏感，对Ni     

Evaluation of a healthcare safety climate measurement tool

Problem

Psychometrically validated measurement tools are needed to evaluate an organization's safety climate. In 2000, Gershon and colleagues published a new healthcare safety climate measurement tool to determine its relationship to safe work behavior (Gershon, R., Karkashian, C., Grosch, J., Murphy, L., Escamilla-Cejudo, A., Flanagan, P., et al. (2000). Hospital safety climate and its relationship with safe work practices and workplace exposure incidents. American Journal of Infection Control, 28, 211-21). The present study evaluated the psychometric properties of the Gershon tool when modified to address respiratory rather than bloodborne pathogen exposures.

Method

Medical practitioners, nurses, and nurse aides (n = 460) were surveyed using the modified Gershon tool. Data were analyzed by factor analysis and psychometric properties of the tool evaluated.

Results

Eight safety climate dimensions were extracted from 25 items (Cronbach's alpha range: 0.62 - 0.88). Factor extractions and psychometric properties were reasonably consistent with those of the Gershon tool.

Impact on Industry

The Gershon safety climate tool appears to have sufficient reliability and validity for use by healthcare decision makers as an indicator of employee perceptions of safety in their institution.