成都市及周边地区严重臭氧污染过程成因分析

结合天气形势,地面观测资料和WRF-CMAQ模式,分析了2017年7月8~15日成都市一次罕见持续O₃污染过程的特征及成因,量化了各个物理化学过程对此次污染过程的相对贡献,并通过敏感性实验分析了四川盆地内O₃及其前体物的区域传输和本地光化学反应对此次污染过程的影响.结果表明,此次O₃持续污染过程主要是因为四川盆地内盛行偏东风,导致盆地东部城市群的O₃及其前体物经区域输送到成都及周边地区,加之成都市出现小风、气温升高等气象条件进而形成,属于典型的传输性爆发污染.持续污染形成的主要物理化学机制体现为日间气相化学过程贡献为稳定的正值,加之输送过程贡献出现爆发式升高,进而导致近地面O₃小时净增量迅速上升且高达50μg/（m³·h）,随之O₃浓度迅速响应,产生爆发式增长.此外,敏感性实验结果显示此次成都市O₃持续污染的形成受区域输送影响较受本地光化学反应影响更为明显.O₃污染爆发前上游地区高浓度O₃及其前体物沿流场输送并在成都及周边地区不断积累,导致日间O₃浓度不断升高.     

漓江流域δD和δ18O对蒸发的指示作用

以漓江流域为例查明不同水体之间氢氧稳定同位素组成特征,并探讨氢氧稳定同位素对漓江流域的蒸发过程指示作用.结果表明：流域内不同水体之间,氢氧稳定同位素表现出不同的组成特征,地表水和地下水,在丰水期δD值和δ¹⁸O值要比枯水期更容易富集,地下水的δD值和δ¹⁸O值分布范围较地表水小;随着水温的升高,δ¹⁸O的变化趋势比d-excess明显.从漓江上游到下游高程逐渐下降,河水线的斜率和截距也在逐渐减小,其中漓江下游河水线的斜率和截距要低于当地大气降水线,表明下游受到蒸发作用较强烈;地下河水线、地表河水线在一定程度上偏离当地大气降水线,但偏离程度较小,表明三者之间有很好的水力联系.受温度和湿度的共同影响,漓江干流丰水期河水的蒸发量占最初水体总量的0.7%~9.1%,枯水期河水的蒸发量占最初水体总量的2.6%~9.7%,丰水期的蒸发比例低于枯水期,从上游到下游蒸发比例在逐渐上升.研究区蒸发量估算值为959.40mm,与多年实测值少43.11mm,相对误差4.70%.氢氧稳定同位素对研究区降水、地表水、地下水之间的转换规律具有重要的实际意义,在今后的漓江流域水文研究中有着更加广阔的空间.     

近三十年中国非点源污染研究现状与未来发展方向探讨

非点源污染是我国面临的重要环境问题之一,其影响范围广,污染不易控制,因此受到研究者和管理者越来越多的关注.中国非点源污染研究呈起步晚、速度快、范围广的发展特点,近十年来相关论文发表已达到一定数量,但是现有研究多是针对非点源污染体系中某些方面进行探究,缺少从全国尺度和长时间序列角度对我国非点源污染研究现状的梳理和总结.本文从全球主要文献库中检索了1988—2018年我国非点源污染的相关文章,挑选出1354篇文章进行统计分析,对于年发文数量、研究区所属省份、研究区所属流域、研究对象和研究方法分别进行统计展示.对我国近三十年非点源污染研究现状与存在问题进行总结,其中农业非点源污染需要继续深入探究其机理,城市非点源污染研究深度不足,研究地区有较大差异,研究方法存在复杂性与实用性的矛盾.未来中国非点源污染研究仍会以农业和农村非点源为主要研究对象;城市非点源将得到进一步发展;非点源污染物的防治与利用将成为重要的研究目标和研究方向;在国家实施的长江大保护战略及黄河生态保护高质量发展战略中,非点源污染也是关键研究问题;全球变化对非点源污染的影响也将是未来研究不可忽视的问题.本文对近三十年中国非点源污染研究规律进行了总结,探究发展变化原因,并提出未来发展方向,为污染源控制以及污染管理提供科学建议和决策支持.     

Treatability studies of naphthalene in soil,water and air with persulfate activated by iron(Ⅱ)

Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO₄], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO₄] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.     

Revealing the changes of bacterial community from water source to consumers tap: A full-scale investigation in eastern city of China

This study profiled the bacterial community variations of water from four water treatment systems, including coagulation, sedimentation, sand filtration, ozonation-biological activated carbon filtration (O₃-BAC), disinfection, and the tap water after the distribution process in eastern China. The results showed that different water treatment processes affected the bacterial community structure in different ways. The traditional treatment processes, including coagulation, sedimentation and sand filtration, reduced the total bacterial count, while they had little effect on the bacterial community structure in the treated water (before disinfection). Compared to the traditional treatment process, O₃-BAC reduced the relative abundance of Sphingomonas in the finished water. In addition, ozonation may play a role in reducing the relative abundance of Mycobacterium. NaClO and ClO₂ had different effects on the bacterial community in the finished water. The relative abundance of some bacteria (e.g. Flavobacterium, Phreatobacter and Porphyrobacter) increased in the finished water after ClO₂ disinfection. The relative abundance of Mycobacterium and Legionella, which have been widely reported as waterborne opportunistic pathogens, increased after NaClO disinfection. In addition, some microorganisms proliferated and grew in the distribution system, which could lead to turbidity increases in the tap water. Compared to those in the finished water, the relative abundance of Sphingomonas, Hyphomicrobium, Phreatobacter, Rheinheimera, Pseudomonas and Acinetobacter increased in the tap water disinfected with NaClO, while the relative abundance of Mycobacterium increased in the tap water disinfected with ClO₂. Overall, this study provided the detailed variation in the bacterial community in the drinking water system.     

资源科学的学科建设与人才培养模式的实践与思考

资源科学是自然科学、社会科学和工程技术科学相互交叉、相互渗透、相互结合的多学科横向发展的新学科领域,具有综合性、交叉性等学科特点。研究适应新时期面向国家和社会发展需求的资源科学学科建设与人才培养方向具有重要的科学与实践意义。在梳理资源科学的学科发展历程基础上,进一步探讨国内外高等院校资源科学的研究领域、学科体系建设、课程及专业设置和人才培养模式,总结了我国资源科学的学科建设和人才培养的成就与不足,以期更好地服务国家需求。     

GA-g-PAMPS/AA/ST凝胶的制备及对亚甲基蓝吸附性能

采用微波辐射技术,通过接枝共聚反应制备了阿拉伯胶（GA）-g-2-丙烯酰胺-2-甲基丙磺酸（AMPS）/丙烯酸（AA）/海泡石黏土（ST）（GA-g-PAMPS/AA/ST）复合水凝胶,利用FTIR、XRD、SEM对复合水凝胶进行了表征,研究了水凝胶对水溶液中亚甲基蓝（MB）染料的吸附性能.结果显示：GA、ST和AA与AMPS发生了接枝共聚反应,形成具有均匀三维网络结构的复合水凝胶.0.025g水凝胶可以使体积为50mL、pH值为6.4、浓度为600mg/L的MB溶液的吸附量和吸附率分别达1146mg/g和95.5%,水凝胶具有较好的重复利用性能.Freundlich等温模型和准二级动力学模型能更好地描述吸附过程.热力学研究表明水凝胶对亚甲基蓝吸附是自发、吸热和不可逆的过程.该水凝胶可用作阳离子染料和阳离子型污染物的潜在候选生物质吸附剂.     

密封组合形式对结构密封性能影响研究

目的研究密封组合形式对结构密封性能的影响。方法开展密封性能试验,从密封形式、装配形式和涂覆形式的3种组合形式开展试验研究,找出结构密封性能影响因素,筛选密封最优组合形式。结果结构密封3种组成形式分别为有无贴合面的密封形式,干涉装配、湿装配形式,部分涂覆、全涂覆形式。开展2种应力水平下8种密封组合形式的密封性能试验,在保证密封工艺质量条件下,按照飞机结构和受载特点选取合理密封组合形式能有效提高结构密封性能。结论在飞机应力较高、不常拆的密封部位应选择贴合面密封、干涉装配、部分涂覆的密封组合形式,在飞机结构设计要求间隙装配、常拆卸的密封部位选择贴合面密封、湿装配、部分涂覆的密封组合形式。     

亚铵法制浆造纸厂中段废水处理技术分析研究

通过对采用两级气浮做预处理 ,生物硫化床串联接触氧化做深度处理的治理技术的分析研究 ,结合废水处理工程实例 ,说明了用两级串联气浮 +硫化床 +接触氧化工艺处理造纸中段水技术切实可靠 ,该治理工艺对处理亚铵法麦草制浆造纸中段废水有较强的针对性和可行性。     

An integrated assessment model for cross-country pipelines

The cross-country petroleum pipelines are environmentally sensitive because they traverse through varied terrain covering crop fields, forests, rivers, populated areas, desert, hills and offshore. Any malfunction of these pipelines may cause devastating effect on the environment. Hence, the pipeline operators plan and design pipelines projects with sufficient consideration of environment and social aspects along with the technological alternatives. Traditionally, in project appraisal, optimum technical alternative is selected using financial analysis. Impact assessments (IA) are then carried out to justify the selection and subsequent statutory approval. However, the IAs often suggest alternative sites and/or alternate technology and implementation methodology, resulting in revision of entire technical and financial analysis. This study addresses the above issues by developing an integrated framework for project feasibility analysis with the application of analytic hierarchy process (AHP), a multiple attribute decision-making technique. The model considers technical analysis (TA), socioeconomic IA (SEIA) and environmental IA (EIA) in an integrated framework to select the best project from a few alternative feasible projects. Subsequent financial analysis then justifies the selection. The entire methodology has been explained here through a case application on cross-country petroleum pipeline project in India.