ASSESSING FLUSHING-FLOW REQUIREMENTS FOR BROWN TROUT SPAWNING GRAVELS IN STEEP STREAMS1

Flushing flows are re1eses from dams designed to remove fine sediment from downstream spawning habitat. We evaluated flushing flows on reaches proposed for hydroelectric diversions on seven streams in the eastern Sierra Nevada, California, with wild populations of brown trout (Salmo trutta). The stream reaches are steep (average map slopes range from 7 to 17 percent), are dominated by boulder cascades, and afford few opportunities for gravel deposition. Methods for estimating flushing flows from flow records, developed from studies in other localities, produced widely differing results when applied to the study streams, probably reflecting differences in the hydrologic and geomorphic characteristics of the streams on which the methods were developed. Tracer gravel experiments demonstrated that all sampled gravels were washed out by the flows of 1986, a wet year. Size analyses of gravel samples and hydraulic data from field surveys were used in tractive-force calculations in an attempt to specify the flow required to flush the gravels. However, these calculations produced some unrealistic results because the flows were nonuniform in the study reaches. This suggests that the tractive-force approach may not be generally applicable to small, steep streams where nonuniform flow conditions prevail.     

近断层强震速度脉冲效应及连续梁桥减隔震特性分析

应用非线性时程分析的方法 ,对于减、隔震连续桥梁在近场地震作用下的有效性和响应特性 ,作了深入的研究。通过有代表性的脉冲型近场强震记录时程分析 ,提出了用速度脉冲峰值及其周期之积来表示速度脉冲能量的方法 ,计算表明近场地震速度脉冲波能近似表征地震动破坏能力的大小 ,它和桥梁结构承受的地震响应大体成正比例关系。铅芯橡胶隔震支座在近场地震作用下仍然适用 ,但对于个别脉冲型强震记录效果不够明显 ,支座参数有必要进行优化。     

Electrochemical Monitoring of Methylparathion Degradation in an Acid Aqueous Medium in Presence of Cu(II)

Abstract

A study was undertaken to determine the effect of Cu(II) in degradation of methylparathion (o,o-dimethyl o, 4-nitrophenyl phosphoriotioate) in acid medium. Initial electrochemical characterization of Cu(II) and methylparathion was done in an aqueous medium at a pH range of 2–7. Cu(II) was studied in the presence of different anions and it was observed that its electroactivity depends on pH and is independent of the anion used. Methylparathion had two reduction signals at pH ≤ 6 and only one at pH > 6. The pesticide's transformation kinetic was then studied in the presence of Cu(II) in acid buffered aqueous medium at pH values of 2, 4, and 7. Paranitrophenol appeared as the only electroactive product at all three pH values. The reaction was first order and had k values of 5.2 × 10^?3 s^?1 at pH 2, 5.5 × 10^?3 s^?1 at pH 4 and 9.0 × 10^?3 s^?1 at pH 7. It is concluded that the principal degradation pathway of methylparathion in acid medium is a Cu(II) catalyzed hydrolysis reaction.     

陶瓷膜污染过程分析与膜清洗方法优化

采用膜孔径为50 nm的陶瓷膜错流过滤方式,对碱性高浓度有机洗涤废水进行9个周期的膜通量衰减及反向脉冲清洗再生实验研究.通过设计膜污染阻力构成实验,测算膜污染总阻力及其构成比例.实验结果表明,膜固有阻力比例较低,浓差极化污染较弱,Rt和Rc+Rirt污染阻力稳定性较高,膜堵塞形式兼有孔内堵塞和滤饼过滤；选择质量分数0.1％的稀盐酸和0.2％的草酸溶液膜清洗效果均较好,清洗时间为3 min,脉冲时间和频率为3 s/5 s.     

燃煤锅炉机组电改袋工程成功案例分析

以宝钢电厂3#机组电改全袋工程为例，论述了该成功工程的特点，介绍了袋式除尘器及滤料的比选过程、结构型式和设计参数，总结了除尘系统所具有的技术特色和投运后所取得的效果，该案例对袋式除尘器在电站锅炉的推广应用具有参考意义。     

地面浓度反推法计算石化企业无组织排放源强

对某石化企业储罐区和原油脱酸装置区的无组织排放非甲烷总烃进行监测，对监测数据进行Pearson相关分析，运用地面浓度反推法计算源强。实验结果表明：原油脱酸装置区各采样线浓度间的相关性好，反推出的源强较为准确，50，100，150 m采样线的反推源强非常接近，分别为21.68，21.60，19.76 t/a；而储罐区监测浓度的相关性不佳，该区域的非甲烷总烃无组织排放源可能不单一，不适用地面浓度反推法计算其源强。     

废钢铁切割加工烟尘的治理

介绍了氧-乙炔火焰切割加工废钢铁产生的烟尘治理系统的设计和系统设备选型,重点介绍了烟尘捕集罩的设计和除尘器、电磁脉冲阀、风机的选型和PLC自动控制以及系统实际运行效果,为废钢铁加工企业治理污染提供一套简单、经济、实用的除尘系统作参考.     

正压空气呼吸器面罩的数字化设计

本文介绍了一种新型正压空气呼吸器面罩的结构设计。分别从数据采集、曲面重构及实体建模等方面对面罩的数字化设计步骤进行了详细阐述，并对面罩视野进行了初步校核。     

反渗透膜处理维生素C凝结水的最优工艺条件

针对维生素C生产工艺中产生的凝结水产量大、处理成本高、存储运输困难和营养物质含量偏低等问题，采用反渗透技术对VC凝结水进行处理。实验建立小试规模反渗透膜处理装置，采用无量纲化多元回归分析方法，分析了操作条件指标与渗透水评价指标两套指标体系之间的关系，定量评价了各个操作条件指标对渗透水评价指标的整体影响程度，并在此基础上研究了最佳操作条件的工艺参数。结果表明：建立的无量纲化多元回归分析方法切实有效，在正交实验设计水平范围内，压力、pH和回流比均是多目标系统的影响因子，操作条件指标对渗透水评价指标的整体影响程度大小顺序为：压力〉pH〉回流比〉温度，且各自影响程度所占比例分别为43．02％、29．01％、25．07％和2．89％。各个操作因子对多指标系统的影响是独立的。在只考虑系统收益而不考虑膜污染的情况下，最佳操作条件分别为：温度r=30．65，压力P=1．5MPa，回流比r=0．78，pH=7．475。     

β-PbO2和BDD电极处理印染反渗透浓水性能

系统比较了β-PbO₂/Ti-Ti和BDD/Si-Ti两种电极体系处理实际印染行业反渗透浓水(ROC)的性能,考察了同步去除化学需氧量(COD)和总氮(TN)的动力学,以及对废水可生化性的改善情况.结果表明,BDD/Si-Ti电极体系的析氧电位(2.45V)和析氯电位(1.90V),以及阳极氧化电位和阴极还原电位的绝对值均高于β-PbO₂/Ti-Ti电极体系;两种电极体系对COD以及TN的去除符合拟一级动力学,其中BDD/Si-Ti电极体系对COD去除的表观速率常数和能量利用效率均优于β-PbO₂/Ti-Ti电极体系;而β-PbO₂/Ti-Ti电极体系对TN去除的表观速率常数和能量利用效率更优.β-PbO₂/Ti-Ti电极体系在5mA/cm²的电流密度下电解15min,可使反渗透浓水BOD/COD从0.18升至0.42(提高1.33倍),而BDD/Si-Ti电极体系仅提升0.78倍.两者相比,BDD/Si-Ti电极体系适用于矿化污染物,β-PbO₂/Ti-Ti电极体系适用于改善废水可生化性.