丁腈橡胶密封圈高温老化行为——自由状态和承压状态

目的研究丁腈橡胶密封圈自由状态和承压状态下的高温老化行为。方法以拉伸强度和拉断伸长率为参数,对各温度下的老化行为进行表征和分析。结果 70℃条件下机械应力大大加快了橡胶密封件拉伸强度的下降速率,以致试验64 d时拉伸强度甚至比110℃时还低,拉断伸长率的下降速率也明显加快了;90℃加速条件下机械应力对拉伸强度的下降有一定的促进作用,但对拉断伸长率的变化基本无影响;110℃加速条件下机械应力对拉伸强度和拉断伸长率均没有明显的影响。结论机械应力在较低温度下可以显著促进丁腈橡胶密封圈热氧老化,高温条件下促进作用不明显。     

临沧孟定镇天然橡胶加工业对环境的污染及防治措施

根据临沧市孟定镇天然橡胶加工业中存在的选址不合理、臭气及废水污染严重等问题,提出严格执行相关规划及准入条件、加强监管、严格执法及强化宣传教育等一系列措施。     

Variation of soil fertility and carbon sequestration by planting Hevea brasiliensis in Hainan Island, China

The development of rubber industry depends on the sustainable management of rubber plantation. To evaluate the environmental effects of planting Hevea brasiliensis on a subsystem of tropical forest ecosystem, the variation of soil fertility and carbon sequestration under rubber plantation within 30-year life period were investigated in Hainan Island. Results showed that （1） with the increase of stand age of rubber plantation, soil fertility decreased all along. From 1954 to 1995, soil organic matter, total N, available K and available P decreased by 48.2%, 54.1%, 56.7% and 64.1%, respectively. （2） If the complete return of litters was considered without additional fertilizer application to the soil of the rubber plantations, the consumption periods for P, N, K, Mg were only 825 years, 329 years, 94 years and 65 years, respectively~ To improve soil fertility is essential for rubber plantation development. （3） The C sequestration of rubber trees per hectare accounts for 272.08 t within 30-year life period and 57.91% of them was fixed in litters. In comparison with C sequestration by rain forest （234.305 t/hm^2） and by secondary rain forest （150.203 t/hm^2）, rubber forest has more potentials for C fixation. On the base of above results, the following measures would benefit the maintenance of soil fertility and the development of rubber industry, including applying fertilizer to maintain the balance of soil nutrients, intercropping leguminous plant to improve soil fertility, reducing the collection of litters, optimizing soil properties to improve element P availability such as applying CaCO3. The information gathered from the study can be used as baseline data for the sustainable management of rubber plantation elsewhere.     

橡胶制品工业环境影响评价重点问题研究

建设项目环境影响报告编制过程中常因未注意到某些关键问题的论述,而使环境影响报告缺乏科学性和可靠性,导致环境影响评价结论依据不足.为使建设项目从环境保护角度分析更具有可行性,以某橡胶制品项目为例,总结了橡胶制品工业项目环境影响评价文件中需注意的几个要点问题,为环境保护主管部门审批环境影响评价文件提供必要的依据,为此类项目更好地开展环境保护工作提供指导.     

设置限位器双向隔震铁路桥梁车桥耦合动力响应研究

对铅芯橡胶双向隔震铁路桥梁在列车荷载作用下的力学性能进行了研究,针对双向隔震铁路桥梁中存在的问题,提出了设置限位器的解决方案,并对设置限位器的双向隔震铁路桥梁进行了车桥耦合动力响应分析.研究结果表明,采用常规隔震设计方法的铅芯橡胶支座在横桥向的初始刚度和屈服强度均不能满足规范要求,设置限位器后,双向隔震铁路桥梁的力学性...     

胶布热空气连续硫化废气的焚烧处理

比较了胶布热空气连续硫化废气的几种处理方法，认为焚烧法是最有效的处理方法，并对应用该法处理废气的工艺原理、主要设备、余热回收是焚烧过程中诮注意的事项作了较详尽的阐述。     

小口径弹用密封材料贮存寿命预测

采用美国军用手册，ASTM的方法和数据，以最少的试验和费用，快速地预测硅橡胶贮存寿命。预测结果可以作为评估该弹用密封材料自然长贮寿命的依据。     

Study of Fatigue Life and Filler Interaction of Paper Sludge Filled Epoxidized Natural Rubber (ENR) and Maleated Natural Rubber (MNR) Composites

An investigation on the effect of epoxidation and maleated natural rubber (MNR) on fatigue and rubber-filler interaction properties of paper sludge filled natural rubber composites was elucidated. Paper sludge loading was varied from 0 to 40 phr and conventional vulcanisation system was used while compounding was carried out on a laboratory sized two roll mill. Two different types of natural rubber, SMR L and ENR 50 having 0 and 50 mole% of epoxidation were used in order to investigate the effect of epoxidation on the composites. Results indicate that, at a fixed filler loading, ENR 50 vulcanizates exhibit higher fatigue life than SMR L vulcanizates especially at filler loading below 20 phr which might be associated with better rubber-filler interaction. In the case of composites with the addition of maleated natural rubber (MNR), a higher fatigue life was observed due to presence of physical and/or chemical linkages, which increases the interfacial adhesion. Scanning electron microscopy (SEM) micrographs of fatigue fracture surfaces and rubber-filler interaction study supported the observed result on fatigue life.     

丁苯橡胶生产过程中不稳定因素分析及对策

针对丁二烯自聚物闪燃爆炸和后处理胶粒塑化着火的形成机理、形成条件、影响因素进行了分析,并提出了防范措施和应急处理办法。     

天然胶/公共网络/废胶粉互穿聚合物网络

通过互穿聚合物网络技术成功制备了天然橡胶/公共网络/废胶粉共轭三组分,并测定了力学性能和微观形态。结果表明:当A/B摩尔比为2/1、AB含量为4.5%、废胶粉粒径为60目、废胶粉含量为15%时,体系的力学性能最好,共轭三组分天然橡胶/公共网络/废胶粉体系的磨耗体积明显低于两组分天然橡胶/废胶粉体系的磨耗体积。界面共轭互穿改善了界面结合,可减少反复压缩过程中的相间摩擦生热和变形。