城市污染河道沉积物AVS与重金属生物毒性研究

采集珠江三角洲典型城市污染河道佛山水道表层沉积物和上覆水样品,测定了沉积物AVS,Eh,SEM_Pb,SEM_Cd,SEM_Cu,SEM_Zn,SEM_Ni,SEM_Cr,及上覆水Eh,DO.同步进行了底栖动物调查,结合调查结果分析了城市污染河道沉积物AVS与重金属生物毒性的关系.主要研究SEM-AVS判据在判断城市重污染河道重金属生物有效性方面的作用.所测AVS最大值为69.579 μmol/g,最小值为0.339 μmol/g,均值为20.283 μmol/g;各采样站位∑SEM₅（SEM_Pb,SEM_Cd,SEM_Cu,SEM_Zn,SEM_Ni之和）最大值为23.067 μmol/g,最小值为1.062 μmol/g;底栖动物种类和数量均较少,且基本为耐污种,优势种为水丝蚓.13个采样站位中,∑SEM₅-AVS<0的有9个,MDS分析结果显示：这9个站位中的7个底栖动物群落结构相似程度高.这表明重污染河道沉积物重金属的生物毒性与SEM-AVS的值关系密切,SEM-AVS判据在判断重污染区域重金属的生物毒性方面具有较大作用;同时说明重污染河流重金属生物毒性比较复杂,不能完全由SEM-AVS解释.     

荧光桃红-溴化十六烷基三甲基铵检测有机磷农药残留总量

在pH为6.40的B-R缓冲溶液中,荧光桃红与一定浓度的溴化十六烷基三甲基胺发生荧光增强反应,加入有机磷农药后,体系的荧光强度降低,且降低程度与有机磷农药的加入量呈良好的线性关系,建立了用此荧光法来测定有机磷农药残留总量的新方法.在优化试验条件下,线性范围为0.008-0.72 mg·L-1,检出限为0.05 mg·L...     

太湖沉积物酸可挥发性硫化物分布特征及重金属生物有效性评价

对太湖4个湖区沉积物的酸可挥发性硫化物（AVS）和同步可提取重金属（SEM）的水平和垂直分布特征进行了研究,并对沉积物重金属的潜在生态风险进行初步评价.结果表明,氧化还原电位（Eh）与AVS和SEM含量均无显著相关性;表层沉积物中AVS含量分布在研究区差异较大,变异系数达134.28%;∑SEM含量波动较小,变异系数为...     

Reversibly enhanced aqueous solubilization of volatile organic compounds using a redox-reversible surfactant

Surfactant-enhanced remediation (SER) is an effective method for the removal of volatile organic compounds (VOCs) from contaminated soils and groundwater. To reuse the surfactant the VOCs must be separated from the surfactant solutions. The water solubility of VOCs can be enhanced using reversible surfactants with a redox-acive group, (ferrocenylmethyl)dodecyldimethylammonium bromide (Fcl2) and (ferrocenylmethyl)tetradecanedimethylammonium bromide (Fcl4), above and below their critical micelle concentrations (CMC) under reducing (I⁺) and oxidative (I²⁺) conditions. The CMC values of Fcl2 and Fcl4 in I⁺ are 0.94 and 0.56 mmol/L and the solubilization of toluene by Fcl2 and Fcl4 in I⁺ for toluene is higher than the solubilization achieved with sodium dodecyl sulfate, cetyltrimethylammonium bromide and Trition X-114. The solubilization capacity of the ferrocenyl surfactants for each tested VOCs ranked as follows: ethylbenzene > toluene > benzene. The solubilities of VOCs by reversible surfactant in I⁺ were 30% higher than those in I²⁺ at comparable surfactant concentrations. The effects of Fcl4 concentrations on VOCs removal efficiency were as follows: benzene > toluene > ethylbenzene. However, an improved removal efficiency was achieved at low ferrocenyl surfactant concentrations. Furthermore, the reversible surfactant could be recycled through chemical approaches to remove organic pollutants, which could significantly reduce the operating costs of SER technology.     

低温等离子体-催化协同降解挥发性有机废气

低温等离子体-催化协同技术适合于各类挥发性有机物的治理,特别是大气量低浓度的有机废气的处理.高效催化剂的加入可 以显著提高等离子体反应中有机废气的降解效率,减少有害副产物的生成以及提高反应器的能量利用率.从反应器、催化剂以及背景气体等方面探讨了该技术实现产业化需要解决的问题,结合低温等离子体与催化剂的相互作用、等离子体...     

广州大气挥发性有机物的臭氧生成潜势及来源研究

2008年秋季在广州城区及其下风向沿海乡村地区采用活性炭吸附管采集大气挥发性有机化合物(VOC),应用二次热解吸-GC/MS联用技术测量56种VOC的大气浓度,研究在典型海陆风条件下VOC的组成特征和日变化规律,并采用臭氧最大增量及OH自由基反应活性两种方法估算了该地区各VOC的臭氧生成潜力,探讨了VOC优先控制物种及...     

大气痕量挥发性有机物碳同位素分析研究进展

对于大气痕量挥发性有机物的研究,浓度测量方法在满足科学研究的要求方面尚有欠缺,相比之下,同位素测量方法具有测量精度高、对源解析准确和测量误差小的特点且发展迅速,该方法在大气痕量挥发性有机物的研究中所起到的作用日益显著;但由于同位素测量技术对大气样品质量的要求很高,故目前该方法在大气环境科学的研究领域中还不能普及,今后随...     

固态胺吸附剂分离密闭空间低浓度CO_2的研究进展

近年来,密闭空间低浓度CO2的吸附分离技术是研究热点,固态胺吸附剂因其再生能耗低、选择性高、易操作等优点受到广泛关注。综述了固态胺吸附剂常见的制备方法、表面改性剂和多孔材料载体,同时综合评价CO2的吸附效率,最终展望了固态胺的发展趋势。     

有机再生胺在锅炉烟气脱硫中运用浅析

主要介绍了中铝贵州分公司热电厂采用加拿大Cansolv公司再生胺在我厂锅炉烟气脱硫中的运用情况,存在问题,需要改进方面进行浅析,希望在同行业中具有一定的推广价值。     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.