Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

基于阳离子树脂的Fenton非均相催化剂制备及性能测试

采用阳离子交换树脂颗粒为催化剂载体采用浸渍法负载二价铁离子,制备出非均相Fenton反应催化剂,并用该非均相Fenton催化剂氧化脱色亚甲基蓝溶液,考察其催化性能。实验结果表明:制备催化剂时最佳FeSO4浓度为16.67 mmol/L,pH=3.0,H2O2初始浓度为46.6 mmol/L,反应时间为30 min的条件下,亚甲基蓝溶液初始浓度为0.028 mmol/L时,亚甲基蓝溶液在非均相Fenton催化氧化过程中,其脱色率可达92.9%。采用序批形式反应使用5次后,该非均相催化剂仍有良好的催化效果,反应30 min后亚甲基蓝溶液脱色率仍可达85.2%,拓宽了Fenton技术的使用范围。     

城市生活垃圾和污泥填埋场的恶臭污染问题及其控制对策探讨

本文在分析城市生活垃圾和污泥填埋场产生恶臭物质的种类与污染特点和当前恶臭污染治理的方法基础上,针对我国目前填埋场恶臭治理过程中存在的各种问题提出了综合治理思路和方向。     

γ-Fe_2O_3/膨胀石墨复合材料吸附废水中六价铬的应用研究

介绍了采用溶胶凝胶法合成新型的复合材料-磁性的γ-Fe_2O_3膨胀石墨(MEG)复合材料。通过采用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X-光电子能谱仪(XPS)对该复合材料MEG进行了表征,结果表明MEG中γ一Fe_2O_3的粒径约为50nm,而且其中γ一Fe_2O_3和膨胀石墨通过C=O相互作用。复合材料MEG作为新型的六价铬吸附剂,通过吸附时间、初始溶液的pH值以及再生性对该吸附过程进行了考察。结果表明:在40 min内MEG吸附六价铬的过程基本达到平衡;在初始溶液的pH为3.5时,MEG对六价铬的最大吸附量可以达到16.4mg/g;而且该复合材料MEG重复使用3次后吸附效果基本没有下降。因此,复合材料MEG对于废水中六价铬的处理有选择性吸附作用,而且初始溶液的pH值对其吸附过程起着重要作用。     

基于LandsatTM数据的济宁市水体识别方法研究

文章基于济宁市2009年LANDSAT TM影像,根据影像各波段间的相关性和地物在各影像上的灰度差异,分别采用单波段阈值法、多波段谱间关系法、改进的水体指数法(MNDWI)及HIS空间水体提取模型法对济宁市水体信息进行识别提取。在此基础上,结合归一化指数法和HIS空间水体提取模型,提出了一种综合性的水体信息提取方法,并对各方法提取结果进行了精度评价。结果表明,已有方法对济宁市水体识别存在一定的缺陷,而综合法集成了归一化指数法和HIS空间水体模型的优点,很好地弥补了已有方法的不足,对济宁市水体信息进行了较好的提取,尤其是细小水体,同时也很好地消除了建筑物、阴影、水生植被等的影响,提高了济宁市水体信息识别的精度,为更好地定量评价济宁市地表水体时空演变规律等提供帮助。     

渭南市大气环境容量计算及控制对策研究

以修正A值法估算渭南市大气环境容量,为渭南市大气总量控制提供科学依据。以箱模型为基本模型,利用陕西省气象台整编的1961-2008年气象资料,推导出宏观总量控制修正A值法,除韩城市、潼关县、浦城县、白水县和富平县A值大于国标A值,其余渭南各市县A值小于国标A值。在新空气质量标准标准的要求下,渭南市SO2、NOx、PM10环境容量分别为19.55×104t/a、10.50×104t/a和18.97×104t/a。为了保证各分区的环境质量,中架点源排放量与低源排放量之和应小于各分区容量,韩城市应注意改善中、低源NO x排放,其它区县NO x剩余容量有限,在严格的新空气质量标准的要求下,应加强对各区县中架点源与低架源的NO x控制,重点控制水泥行业、炼焦业和机动车的NO x排放。从整个城市考虑,从整个渭南市污染源排放来看,SO2总体排放量超过环境容量12.917×104t/a,NO x总体排放量超过环境容量8.016×104t/a,为了减少其对周边城市的影响,应提高火电厂脱硫效率,重点加快电厂脱硝设施建设。     

气体停留时间对生物滤池去除恶臭和微生物气溶胶影响

气体停留时间是影响生物滤池去除恶臭和微生物气溶胶的重要因素之一。采用小试规模的生物滤池研究了气体停留时间对城市污水处理工艺恶臭和微生物气溶胶去除特性的影响。研究结果表明:随着气体停留时间的增加,硫化氢和氨的去除率随之增加,而异养细菌和真菌的去除率降低,低的气体停留时间利于微生物气溶胶的去除,保证硫化氢、氨和微生物气溶胶均能同时高效去除的气体停留时间为40 s。随着气体停留时间的增加,生物滤池出气中分布于stage1、stage2和stage3的大粒径微生物粒子所占比例减小,而分布于stage5和stage6的小粒径微生物粒子所占比例增加。在低的气体停留时间下,生物滤池出气微生物气溶胶潜在的健康风险更大。     

地下水位变化对边坡稳定性影响的模拟分析

降雨引起边坡地下水位变化、降低岩土体抗剪强度进而引起边坡失稳产生滑坡是电网工程灾害中最常见的地质灾害之一。文章在现场详细工程地质勘察的基础上,基于恢复山体极限平衡法和强度折减法,利用数值分析方法对降雨引起地下水位变化条件下某电网工程边坡稳定性进行了分析。模拟结果表明,现今地下水位条件下,该边坡整体处于极限平衡状态;在最高洪水位条件下边坡则处于失稳状态。边坡的最大变形位于边坡中上部,并呈现出由上部逐渐向下部扩展的趋势。边坡潜在破坏模式为边坡后缘张拉破坏和中下部剪切破坏的复合破坏模式。最后基于数值分析结果,对该边坡的工程治理提出了建议。     

苏州河表层沉积物中总汞测定的研究

采用金汞齐富集-冷原子吸收光谱法直接测定苏州河表层沉积物中的总汞。结果表明:该方法在0.00～200ng范围内呈良好线性关系,检出限为0.005mg/kg(样品以0.2g计)。实际样品测定的RSD为1.24%～4.36%,加标回收率为91.8%～101%。与原子荧光光谱法相比,两种方法测定的结果没有显著差异。