浅析地聚合物的发展和研究动态

地聚合物是一类新型的高性能无机聚合物材料，是碱激活胶凝材料中最具前途的一类。由于其特殊的无机缩聚三维氧化物网络结构，使得地聚合物材料在众多方面具有比高分子材料、水泥、陶瓷和金属更高的高温性能和机械性能；另一方面，地聚合物材料制造过程中的能耗和三废排放量都非常低，材料对环境友好并且可以很好地被回收再年利用，是一种可持续发展的“绿色环保材料”。在比较全面地论述地聚合物材料的发展历史、生产工艺的基础上分析目前存在的问题，提出开发地聚合物材料是兼顾社会发展和减轻环境污染问题的一个较理想的对策。     

废渣──Al(OH)_3凝胶再利用研究

研究了对处理铝材加工含Al3＋的酸性废液过程中产生的二次污染物Al（OH）3凝胶废渣的应用。含水分约90％、80％左右的Al（OH）3凝胶200g分别与14～16mL、22～24mL95％的工业浓硫酸酸反应，可制得浓度为20％～23％的Al（SO4）3溶液，经稀释可用作造纸原料。     

无缝钢管局部径向模具塑性成形过程的三维有限元数值模拟

采用大变形弹塑性有限元理论,用DYNA3D(研究版)有限元软件,对无缝钢管局部径向模具塑性成形过程中当凸模的凹槽尺寸与凸模的圆弧半径发生变化时进行了数值模拟研究,得出了对成形钢管表面质量控制具有重要参考价值的结论,解决了成形钢管表面的压痕问题。     

Effects of bifenthrin on Daphnia magna during chronic toxicity test and the recovery test

IntroductionWiththedevelopmentandapplicationofnewpesticide ,insecticidehasgreatlyreducedtheharmofpesttocrops .Bifenthrinisaneffectivepyrethroidinsecticideandacaricideagainstawiderangeofinsectpests ,anditisverypoisonoustomammal,aquatic .Thisinsecticideiswi…     

三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.     

高浓度Cl-水样CODcr的测定

阐述了高浓度Cl-水样,以铬酸钾做指示剂,加入适量的硝酸银,形成AgCl沉淀,消除了Cl-的干扰,再用离心沉淀机充分沉淀,取上清液,用COD快速测定仪测定CODcr,有很高的准确度,符合测定要求.     

Ag/Al2O3催化剂用于碳氢化合物选择性还原NO

比较了富氧条件下CH4、C3H8、C3H6和C2H5OH分别用作还原剂时,NO在Ag/Al2O3催化剂上的还原活性.结果表明, CH4和C3H8还原NO的活性很低,而C3H6和C2H5OH能有效地还原NO.在此基础上,研究了H2O和SO2对C3H6和C2H5OH在Ag/Al2O3催化剂上还原NO活性的影响.结果表明,H2O的存在会降低低温区的NO还原活性,而且这种影响是可逆的.将H2O 和SO2同时加入反应混合气,引起NO还原活性较大幅度降低,结合程序升温脱附实验结果,认为可能是由于存在SO2时,Ag/Al2O3催化剂吸附NO的能力降低.     

锂离子电池正极材料的回收及再制备

通过湿化学法从废旧锂离子电池中回收得到Li+、Co2+的硝酸溶液,以此为钴源,与Ni(NO3)2.6H2O、Mn(NO3)2按化学计量比混合,用草酸盐共沉淀法制备草酸盐前驱体,然后按Li过量5%加入Li2CO3混合,在空气中于800～950°C煅烧15 h得LiCo1/3Mn1/3Ni1/3O2,研究了煅烧温度对材料结构、形貌以及电化学性能的影响。结果表明,900℃保温15 h制备的LiCo1/3Mn1/3Ni1/3O2正极材料,为理想的(α-NaFeO2层状结构,颗粒为大小均匀的球形,在2.5～4.3 V的电压范围内,以0.1 C的恒定电流进行充放电,其首次充放电比容量分别为194.3和150.9 mAh/g,10次循环之后的容量保持率为89.9%,放电比容量为135.0 mAh/g。