In-depth analysis of aluminum flows in Austria as a basis to increase resource efficiency

Based on the method of material flow analysis (MFA), a static model of Austrian aluminum (Al) flows in 2010 was developed. Extensive data research on Al production, consumption, trade and waste management was conducted and resulted in a detailed model of national Al resources. Data uncertainty was considered in the model based on the application of a rigorous concept for data quality assessment. The model results indicated that the growth of the Austrian “in-use” Al stock amounts to 11 ± 3.1 kg yr⁻¹ cap⁻¹. The total “in-use” Al stock was determined using a bottom-up approach, which produced an estimate of 260 kg Al cap⁻¹. Approximately 7 ± 1 kg of Al yr⁻¹ cap⁻¹ of old scrap was generated in 2010, of which 20% was not recovered because of losses in waste management processes. Quantitatively, approximately 40% of the total scrap input to secondary Al production originated from net imports, highlighting the import dependency of Austrian Al refiners and remelters. Uncertainties in the calculation of recycling indicators for the Austrian Al system with high shares of foreign scrap trade were exemplarily illustrated for the old scrap ratio (OSR) in secondary Al production, resulting in a possible range of OSRs between 0 and 66%. Overall, the detailed MFA in this study provides a basis to identify resource potentials as well as resource losses in the national Al system, and it will serve as a starting point for a dynamic Al model to be developed in the future.     

Radiation heat transfer in transient dust cloud flame propagation

This study investigates the impact of radiation heat transfer and heat conduction on dust cloud combustion. Radiation plays a very important role in the stability of dust cloud flame, and increasing the amount of radiation drastically raises the possibility of instability and explosion in a dust cloud mixture. Flame speed, which is a function of mixture characteristics, can exhibit a fluctuating behavior. By using the discrete heat source method, it would be possible to study the transient propagation of dust flames. Thus, the propagation speed of flame can be obtained, and as time goes by, the transient speed of dust flame will reach its steady state value. By considering the radiation effect, better agreement is observed between the obtained results and experimental data.     

氧化铝表面处理对吸附腐殖酸的影响

采用酸、碱和金属盐表面修饰处理,影响氧化铝表面结构和成份分布,以达到提高吸附性能的目的。研究表明,经酸处理和酸性条件下的钙镁修饰处理的氧化铝,其对腐殖酸的吸附能力比Al-500分别提高32.3％和23.8％。同时,就改性氧化铝去除腐殖酸的影响条件、动力学、热力学性能进行了讨论。     

自动气泵上盖液态模锻一模多件成形方法研究

此文叙述了采用间接液态模锻原理,对自动气泵上盖铝合金件进行一模多件的成形工艺研究。此研究在液压机上进行,所用试验装置结构简单,工艺方法中实现了铝气泵上盖与气嘴钢嵌件的一次连接成形,简化了原装配工序,实现了气泵上盖易于成形、便于脱模、节省材料和提高生产效率,并对成形中存在的问题提出了合理的解决办法。     

铝型材挤压研究进展

对铝型材挤压研究发展历史和研究现状进行了归纳和评价。在此基础上，提出了铝型材挤压研究的前沿课题和发展趋势。     

铝的生物毒性及其防治策略

铝是重要的金属元素,它的广泛应用导致了水体,土壤以及各种水生物,动植物体内残余铝含量不断升高,直接或间接地危害到人体身心健康,威胁着人类的生存和发展。     

Experimental determination of dust cloud combustion parameters of α-AlH3 powder in its charged and fully discharged states for H2 storage applications

This study discusses results of an experimental program for determination of dust cloud combustion parameters of charged and fully discharged states of metastable alane (aluminum hydride, α-AlH₃ polymorph) powder in air. The measured characterization parameters include: maximum deflagration pressure rise (ΔP_MAX), maximum rate of pressure rise (dP/dt)_MAX, minimum ignition temperature (T_C), minimum explosible concentration (MEC), and minimum ignition energy (MIE). These measured values are used for calculating the associated explosion severity (ES) index, and volume-normalized maximum rate of pressure rise (K_St). The experimental results show values of MEC and T_C of fully discharged alane to be greater than those of the charged alane but measured MIE values are about the same. Moreover, the results show higher reactivity of fully discharged alane dust cloud in air compared to its charged state. For example, ES and K_St of discharged alane dust cloud in air are about 300% and 35% greater, respectively, than ES and K_St of charged alane dust. The higher air reactivity of fully-discharged (primarily Al powder) dust cloud compared to its charged state can be attributed to the higher surface energy (J/m²) of Al compared to that of α-AlH₃. These experimental insights have safety implications in postulated risk scenarios involving light-duty vehicles powered by PEM fuel cells. The core insights and critical data provided by this contribution are useful for supporting development and promulgation of hydrogen safety standards and augmenting property databases of hydrogen storage materials.     

Investigation of hydrogen generation from municipal solid waste incineration fly ash

Hydrogen generation from municipal solid waste incineration fly ash was investigated to understand the influences of contacting method, kinds of contact solution, liquid to solid ratio, and particle size distribution of materials. Redox properties of materials and hydrogen generation were also studied. The largest quantity of gas generated in contact with water was 29.1 ml/g-ash, most of which was hydrogen. Fluidized bed fly ash generated more gas than stoker fly ash. In order to calculate the hydrogen generation potential (the maximum quantity of gas generated in contact with water), a novel system using a Y-shaped test tube and NaOH was utilized. This method gives values which are related to the quantity of generated gas in contact with water. A relationship between the aluminum content and hydrogen generation potential was observed, especially for fluidized bed fly ash. The reducing potential of fluidized bed fly ash was higher than that of stoker fly ash. Only fluidized bed fly ash showed a positive correlation between aluminum content and reducing potential, and between reducing potential and hydrogen generation potential. These results suggest that fluidized bed fly ash contains more Al⁰ than stoker fly ash. Received: September 11, 1998 / Accepted: March 19, 1999     

两种不同形态的铝盐混凝剂的吸附电中和特征

通过吸附历时过程,饱和吸附量,吸附过程Ｎａ＾＋离子交换释放,絮凝前后高岭土微粒的ζ电位测定等实验考察ＡｌＣｌ３（ＡＣ）和聚合铝两种不同形态的铝盐对高岭土悬浮水样的吸附电中和特征,并探讨了其作用机理。     

Flame propagation through dust clouds of nano and micron scale aluminum particles

Temperature measurement on propagating flame and minimum explosible concentration are investigated. The dust explosion experiments of nano-particle dust clouds exhibit higher temperature gradient in preheat zone and lower MEC than those of micron particle dust clouds. A heterogeneous model is proposed to describe the oxidation process under two extreme conditions: whether the alumina film is involved in the reaction or not. The new methodology allows the estimation of oxidation kinetics of growing alumina. For micron particle, the model clarifies that the activation energy which has been wrongly considered to be for aluminum oxidation should be for lattice diffusion, and the initial reaction rate is proved to be dominated by the diffusion rate of oxygen through alumina shell as diffusion controlled reaction. For nano-particle, the model explained that why the reported activation energy shows significantly lower than that for micron particle, due to initially ignorable alumina film or considered as kinetically controlled reaction. However, as reaction occurs and alumina builds up on the surface, the interference of alumina somewhat increases the activation energy.