土壤重金属含量测定不同消解方法比较研究

消解是影响土壤重金属测定结果准确性的关键步骤.比较电热板消解、微波消解和全自动石墨消解3种消解方法的操作流程,同时对不同类型土壤样品中Cu、Zn、Pb、Cd、Cr、Ni 6种元素含量进行对比测定,结果表明,电热板消解设备简单,但步骤繁锁,操作不当易造成组分损失；微波消解速度快,测定结果精密性和准确性较好,但仍需人工赶酸程序且罐位少,不适合大批量样品分析；全自动石墨消解不仅测定结果精密性和准确性较好,而且自动化程度高,可实现无人值守,大大节省人力,尤其适合大批量样品的分析.     

微波消解-原子荧光光谱法同时测定土壤中痕量砷和汞

建立了微波消解—原子荧光光谱法同时测定土壤中痕量砷和汞的方法。通过对消解体系以及灯电流、载气流量、屏蔽气流量等仪器参数进行优化,确定了最佳实验条件。在优化的实验条件下,采用原子荧光光谱法同时测定砷和汞的检出限分别为0.02μg/L和0.01μg/L,线性范围分别为0～40μg/L和0～4μg/L,两元素的加标回收率在92%～102%之间,相对标准偏差砷为0.9%～3.1%,汞为1.5%～3.4%,完全适用于土壤环境样品的检测。     

Drop in dry mass and organic substance content in the process of autothermal thermophilic aerobic digestion

This paper presents the results of a study of a sludge subjected to the (ATAD) process – Autothermal Thermophilic Aerobic Digestion occurring in a two-stage installation operated in a municipal wastewater treatment plant in Olecko, Poland. The study of the sludge and the analysis of obtained results were conducted over 2011 and 2014. The subject of the study was a thickened sludge in an intermediate tank from which it was next transferred to facility reactors. The stabilization of processed sludge was evaluated analyzing the change in the dry mass (DS) content in the sludge. Measurements were carried out in thickened sludge samples and after the ATAD process. Collected results were then subjected to a statistical analysis and it was determined to which extent as resulted from the subject process the dry mass and the dry organic mass (VS) content was changing in the sludge. Also, it was analyzed how the oxygen chemical demand (COD) was changing. The dry mass content in the thickened sludge was from 60 g/l to 160 g/l. After the process, this amount was from 35 to 76 g/l. Similarly, the organic mass content in a dry sludge mass changed from initial values within a range of 44–135 g/l to 23–60 g/l after the ATAD process. Also, the organic substance content expressed as COD decreased from 80 to 467 g O₂/l in a thickened sludge to 51–261 g O₂/l in the sludge after the process. The article presents conclusions from the result of the conducted study as well as personal experience.     

两相厌氧反应器相分离实验研究

在两相上流式厌氧生物反应器(UASB)动力学启动成功的条件下,选用钼酸盐作为产甲烷菌抑制剂,进行进一步的分相实验。实验前3 d在产酸相反应器进水中投加2.0 mmol/L的钼酸钠溶液,出水不进入产甲烷反应器。然后停止投加钼酸钠溶液,再运行3 d,出水依然不进入产甲烷反应器。6 d后,产酸反应器出水开始进入产甲烷反应器。结果表明:在停止投加钼酸盐后产酸菌便迅速恢复,而钼酸盐对产甲烷菌的作用是杀灭性的;产酸相出水去除效果降低,但是其酸化率由50%左右上升并最终稳定在60%左右,同时两相厌氧反应器整体去除效率提高。     

Applying environmental policy instruments to used oil

A comprehensive assessment was conducted of California's Used Oil Program, which was established in 1992 to reduce the illegal disposal, and promote the reuse, of used lubricating oil. This paper summarises selected key findings of the assessment and discusses them in the context of designing and implementing policy instruments for promoting environmentally responsible waste management. The approach known as ‘community-based social marketing’ is identified as a promising option.     

法国某生活污水厂污泥好氧消化工艺运行研究

为了提高出水质量，法国小镇Cagnes—sur—Mer的生活污水处理厂从2008年初开始实施高有机负荷的运行，但同时这也提高了出泥产量。由于污泥的处理费用及搬运污泥的交通费用很高，水厂对污泥进行了污泥好氧稳定工艺，工艺使用纯氧机（VSA装置）就地利用空气制氧。工艺投入运行后，每日对好氧消化池的入泥和出泥进行采样和检测（MLSS、MLVSS、pH、COD、DRYNESS etc）以建立完整的运行数据。污泥经好氧消化作用后其有机物含量减少60％以上，每月减少40吨的出泥。同时，消化池的使用还使水厂周日也能对曝气池中的污泥进行抽取，缓解了以往由于周日停止排泥而导致周一曝气池中污泥浓度过大的问题。从而达到优化出水水质的目的。消化池中的温度维持在40℃左右，因为反应为放热反应，所以无需加热设备。此项目所收集到的数据将为这种工艺的发展提供帮助。同时也可以为那些想要减少出泥量的水厂提供一种新的方法。因为它投资小，见效快，操作简单。     

紫外分光光度测定总氮的影响因素探讨

本文介绍了测定总氮过程中,不同消解方法、碱性过硫酸钾的稳定时间、悬浮物粒径对总氮测定的影响。实验表明:碱性过硫酸钾避光在冰箱中至少可保存一个月,悬浮物粒径对总氮的测定无影响,消解总氮时,可在压力锅加热到120℃开始计时,恒温消解30分钟,自然冷却。     

环境电磁辐射测量比对

为考核辐射环境监测质量,浙江省辐射环境监测站组织了2010年全省辐射环境监测网络环境电磁辐射测量比对。采用稳健Z比分数法评价测量数据的一致性。结果表明,射频综合场强测量比对中,9台仪器测量结果满意,1台仪器测量结果离群。工频电磁场测量比对中,有9台仪器测量结果满意,2台仪器测量结果离群。88%的测量值为满意结果,12%为离群结果,测量比对有效地发现了测量仪器存在的问题,保证监测工作结果的准确性。     

加强污染源自动监测设备运行监管的若干思考

从日常监管、运营服务、设备性能等方面分析了污染源自动监测设备市场现状,针对在实际工作中存在的问题,从设备厂商、污染源企业、环保部门的角度提出了加强污染源自动监测设备运行监管的解决思路。     

城市生物质废物中温单级厌氧消化中试研究

建立了城市生物质废物中温单级厌氧消化中试反应器,对城市生物质废物厌氧消化过程系统稳定性、产甲烷性能及有机物的去除效果进行解析.反应器稳定运行410 d,共经历2.4、3.6、4.8、6.0 kg VS/(m3·d)4个负荷,反应器pH稳定在7.2 ～7.6之间,有机酸浓度＜500 mg/L.在负荷6.0 kg VS/(m3·d)时反应器平均容积产气率4.25m3/(m3·d),有机物去除率为63.2％;另外,实验结果表明,厌氧消化过程对蛋白质、脂肪、纤维素及多糖类物质的去除效果有明显差异,其中脂肪类物质去除率为98.2％,产沼气贡献率为38.8％.实现了针对我国城市生物质废物的高负荷高效厌氧消化,为我国城市生物质废物厌氧消化规模化处理提供了基础数据.