亚甲基蓝分光光度法测定废水硫化物的不确定度评定研究

分析了应用亚甲基蓝分光光度(GB/T16489-1996)测定废水硫化物测试过程中不确定度影响因素,主要来源为硫化物标准溶液、标准曲线拟合、随机效应、分光光度计和取样体积这五部分。本测量合成相对标准不确定度0.025 9;其中由测定样品质量引入的不确定度为0.024 7;由样品体积引入的不确定度为0.007 7。本次废水中硫化物测量结果为:0.110±0.006 mg/L,k=2(包含概率约为95%)。     

BOD生物传感器快速测定方法应用与探讨

介绍了微生物传感器快速测定生化需氧量(BOD)的方法,通过对标准溶液、工业废水、地表水、污水处理厂废水的检测,分析其精密度和准确度,通过与BOD_5的比对,对方法的存在问题及适用性进行了探讨和研究,为该方法的发展及其在环境监测中的实际应用提供了技术依据。     

微曝气Fenton氧化法处理模拟双酚A废水的效果及其生物验证

研究了微曝气Fenton氧化法关键工艺参数对模拟双酚A（BPA）废水处理效果的影响，并从活性污泥性质和污染物去除率两方面，采用膜生物反应器(membrane bioreactor, MBR)对微曝气Fenton氧化法的处理效果进行了实验验证，为实现BPA废水的生物处理奠定基础。结果表明，初始pH值、反应时间、H₂O₂/COD(质量浓度比)、H₂O₂/Fe²⁺ (摩尔浓度比)、反应温度及曝气量均对预处理效果有较大影响，在最佳条件下，COD去除率可达70%，BOD/COD值则由原废水的0.02提高到0.50以上。MBR处理上述出水的结果表明，经微曝气Fenton氧化处理BPA的废水，可较好地适应后续的生化处理。     

电石法生产聚氯乙烯行业危险废物判定要点分析

聚氯乙烯树脂是用途极广的热塑性高分子材料,然而,电石法生产聚氯乙烯树脂(PVC)的过程中会产生大量的危险废物,如处置不当会对环境造成严重污染。本文对电石法生产聚氯乙烯树脂(PVC)过程中产生危险废物的类型、环节和产生特性进行了分析,以供环保部门和相关企业作为针对危险废物环境管理的判定依据。     

M3法测定土壤有效态Cd、Cr、Pb和Ni

通过M3法对耕地土壤重金属的联合测定,为土壤重金属污染监测应用提供快速联合测定的方法。用M3法测定北方耕地土壤的有效Cd、Cr、Pb和Ni,通过对M3法与其他方法进行有效重金属测定值差异性及其相关性比较,与全量的浸出率分析等探讨M3法对耕地土壤有效重金属测定的特征。结果表明,M3法在《土壤环境质量标准》(GB 15618—1995)的土壤重金属含量范围内可以测定土壤有效态重金属Cd、Cr、Pb和Ni,且呈线性极显著相关。M3法与其他方法有效Cd、Cr、Pb和Ni有较好的相关性,与DTPA法呈极显著相关;与NaNO₃法除有效Pb外,呈极显著和显著相关;与HCl法除褐土和潮土的有效Pb外,也呈极显著和显著相关。M3法的有效态Cd、Cr、Pb和Ni的测定值均为最大。M3法对4种耕地土壤有效Cd、Cr、Pb和Ni的浸出率,因土壤类型不同,有效重金属含量所占比率不同,但利用M3法测定的有效态Cd、Cr、Pb和Ni的浸出率最大。     

Assessing inter-laboratory comparability and limits of determination for the analysis of cyclic volatile methyl siloxanes in whole Rainbow Trout (Oncorhynchus mykiss)

Cyclic volatile methyl siloxanes (cVMS) are high volume production chemicals used in a wide range of industrial and consumer products. Three cVMS compounds (D4, D5, and D6) have and are undergoing environmental risk evaluations in several countries and have been proposed for legal regulation in Canada. As interest in monitoring concentrations of these chemicals in the environment increase, there is a need to evaluate the analytical procedures for cVMS in biological matrices in order to assess the quality of data produced. The purpose of this study was to determine laboratory testing performance for measuring residues of D4, D5, and D6 in a standard set of fish homogenate samples and to estimate limits of determination for each substance. The samples sent to each laboratory consisted of homogenized whole body tissues of hatchery raised rainbow trout which were fed food fortified with D4, D5, and D6 (dosed) and trout that were fed standard food rations (control). The participants analyzed each sample using their analytical method of choice using their own standards and procedures for quantification and quality control. With a few exceptions, participating laboratories generated comparable results for D4, D5, and D6 in both the dosed and control samples having z-scores between 2 and −2. Method detection limits for the whole fish matrix were on average 2.4 ng g⁻¹ ww for D4, 2.3 ng g⁻¹ ww for D5, and 1.8 ng g⁻¹ ww for D6.     

矿井通风网络数据可靠性检验

进行矿井通风阻力测定时,由于受环境的温度、湿度、压力传递存在时间差以及测点处标高不准确等因素的影响,根据实测数据,计算所得矿井巷道基础数据存在一定的误差,常用的测量数据检验方法只能对若干条通路进行闭合回路检验,而不能对全矿井通风网络基础参数进行可靠性检验。本文中所介绍的检验方法将风网基础数据输入通风网络解算软件,以实测风量和经过计算所得巷道风阻为基准,实测风量为目标条件,进行计算机通风网络模拟,对全矿井巷道风阻进行连续的优化调整,使通风网络模拟结果与实际测定各巷道风量基本符合,从而实现全矿井风网基础数据的可靠性检验。该方法在某矿进行了实际应用,实践证明此方法科学、准确的获得了全矿巷道风阻参数,为矿井的通风改造奠定了技术基础。     

原子吸收法直接测量土壤中的汞含量

实验采用DMA-80自动测汞仪直接测定土壤中的汞含量，详细介绍了土壤样品中汞分析条件的选择，方法在0．4—400ng范围内，线性良好，其检出限为0．2ug／kg。     

GEOLOGIC INFERENCE FROM “FLOW NET” TRANSMISSIVITY DETERMINATION: THREE CASE STUDIES1

A graphical inverse method for determining the regional transmissivity distribution was applied to three field problems. The study areas were the Hanford Site, Washington; the Rocky Mountain Arsenal, Colorado; and the Nevada Test Site, Nevada. This method can aid in flow system conceptualization by revealing the location of bedrock controls for groundwater flow. It is a valuable tool for aiding the hydrogeologist in asking questions about the nature of trends in the pattern of transmissivity values. Quantitative estimates of regional transmissivities can be used as starting points for further parameter refinement. Sensitivity analysis using Monte Carlo simulation shows that quantitative estimates of transmissivity can be obtained when measurement error in the hydraulic head does not cause a large error in the hydraulic gradient.     

AAS与ICP－AES间接测定天然水中硫酸盐

本文以与过量形成ＢａＳＯ＿４沉淀反应为基础，较详细地讨论了反应条件、从而拟定了用ＡＡＳ和ＩＣＰ－ＡＥＳ间接测定天然水中的方法、确定了方法的精密度，ＡＡＳ法的ＲＳＤ％为１．５，ＩＣＰ－ＡＥＳ法为３．２．两种方法对比分析的结果接近，误差为１．０％（相对）。用于天然水中的测定，获得满意的结果。