清洁的胡椒基T醚生产工艺的研究I,5-丙基-1,3-苯并二氧杂茂的氯甲基化废水的处理

报道了胡椒基丁醚生产中５－丙基－１，３－苯并二氧杂茂的氯甲基化的废水处理，该废水经蒸馏可回收９４％的盐酸，此酸吸收氯化氢后浓度在３６％以上，可再用于氯甲基化反应。蒸馏残液经分油、Ｆｅｎｔｏｎ试剂处理和五次生炭柱吸附后ＣＯＤＣｒ等项指标均可国家二类污染物的一级排放标准。     

Upgrading of organic waste: production of the copolymer poly-3-hydroxybutyrate-co-valerate by Ralstonia eutrophus with organic waste as sole carbon source

Two types of fermented organic waste (trade and industry waste and fruit and vegetable waste) were successfully used as a sole carbon source to produce poly-3-hydroxybutyrate-co-valerate (PHBV) by Ralstonia eutrophus (formerly Alcaligenes eutrophus) via oxygen limitation.The production of PHBV could be optimized by optimizing the oxygen transfer through the fermentor. Thereby, a peak concentration of 1.1 g PHBV per liter cell suspension, 40 w% of cell dry weight, was obtained at an aeration rate of 0.24 mol O₂/h·kg biomass. The yield of PHBV on the fatty acid concentration in the organic waste was 0.16 g polymer/g volatile organic matter. The process obtained, compares well with the commercial production process of PHBV based on glucose.     

县域生态功能区划研究——以桐柏县为例

结合桐柏县的实例,对县域生态功能区划分的原则和方法进行初步探讨.综合利用3S技术对县域生态敏感性和生态服务功能重要性的分析和评价,提出桐柏县生态服务功能区划的初步方案.将桐柏县划分为生态支持区,产品供给区,生态调节区.简要分析了各功能区在桐柏县经济可持续发展中的地位和作用,指出各区协调发展的方向和途征.     

In situ preparation of g-C3N4/Bi4O5I2 complex and its elevated photoactivity in Methyl Orange degradation under visible light

A graphite carbon nitride(g-C_3N_4) modified Bi_4O_5I_2 composite was successfully prepared insitu via the thermal treatment of a g-C_3N_4/Bi OI precursor at 400°C for 3 hr.The as-prepared g-C_3N_4/Bi_4O_5I_2 showed high photocatalytic performance in Methyl Orange(MO) degradation under visible light.The best sample presented a degradation rate of 0.164 min~(-1),which is 3.2 and 82 times as high as that of Bi_4O_5I_2 and g-C_3N_4,respectively.The g-C_3N_4/Bi_4O_5I_2 was characterized by X-ray powder diffractometer(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Raman,X-ray photoelectron spectroscopy(XPS),ultraviolet-visible diffuse reflectance spectra(DRS),electrochemical impedance spectroscopy(EIS) and transient photocurrent response in order to explain the enhanced photoactivity.Results indicated that the decoration with a small amount of g-C_3N_4 influenced the specific surface area only slightly.Nevertheless,the capability for absorbing visible light was improved measurably,which was beneficial to the MO degradation.On top of that,a strong interaction between g-C_3N_4 and Bi_4O_5I_2 was detected.This interplay promoted the formation of a favorable heterojunction structure and thereby enhanced the charge separation.Thus,the g-C_3N_4/Bi_4O_5I_2 composite presented greater charge separation efficiency and much better photocatalytic performance than Bi_4O_5I_2.Additionally,g-C_3N_4/Bi_4O_5I_2 also presented high stability.·O_2~-and holes were verified to be the main reactive species.     

浅析地聚合物的发展和研究动态

地聚合物是一类新型的高性能无机聚合物材料，是碱激活胶凝材料中最具前途的一类。由于其特殊的无机缩聚三维氧化物网络结构，使得地聚合物材料在众多方面具有比高分子材料、水泥、陶瓷和金属更高的高温性能和机械性能；另一方面，地聚合物材料制造过程中的能耗和三废排放量都非常低，材料对环境友好并且可以很好地被回收再年利用，是一种可持续发展的“绿色环保材料”。在比较全面地论述地聚合物材料的发展历史、生产工艺的基础上分析目前存在的问题，提出开发地聚合物材料是兼顾社会发展和减轻环境污染问题的一个较理想的对策。     

废渣──Al(OH)_3凝胶再利用研究

研究了对处理铝材加工含Al3＋的酸性废液过程中产生的二次污染物Al（OH）3凝胶废渣的应用。含水分约90％、80％左右的Al（OH）3凝胶200g分别与14～16mL、22～24mL95％的工业浓硫酸酸反应，可制得浓度为20％～23％的Al（SO4）3溶液，经稀释可用作造纸原料。     

无缝钢管局部径向模具塑性成形过程的三维有限元数值模拟

采用大变形弹塑性有限元理论,用DYNA3D(研究版)有限元软件,对无缝钢管局部径向模具塑性成形过程中当凸模的凹槽尺寸与凸模的圆弧半径发生变化时进行了数值模拟研究,得出了对成形钢管表面质量控制具有重要参考价值的结论,解决了成形钢管表面的压痕问题。     

Effects of bifenthrin on Daphnia magna during chronic toxicity test and the recovery test

IntroductionWiththedevelopmentandapplicationofnewpesticide ,insecticidehasgreatlyreducedtheharmofpesttocrops .Bifenthrinisaneffectivepyrethroidinsecticideandacaricideagainstawiderangeofinsectpests ,anditisverypoisonoustomammal,aquatic .Thisinsecticideiswi…     

三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.