Emissions from the combustion of eucalypt and pine chips in a fluidized bed reactor

Interest in renewable energy sources has increased in recent years due to environmental concerns about global warming and air pollution,reduced costs and improved efficiency of technologies.Under the European Union(EU)energy directive,biomass is a suitable renewable source.The aim of this study was to experimentally quantify and characterize the emission of particulate matter(PM_(2.5))resulting from the combustion of two biomass fuels(chipped residual biomass from pine and eucalypt),in a pilot-scale bubbling fluidized bed(BFB)combustor under distinct operating conditions.The variables evaluated were the stoichiometry and,in the case of eucalypt,the leaching of the fuel.The CO and PM_(2.5)emission factors were lower when the stoichiometry used in the experiments was higher(0.33±0.1 g CO/kg and 16.8±1.0 mg PM_(2.5)/kg,dry gases).The treatment of the fuel by leaching before its combustion has shown to promote higher PM_(2.5)emissions(55.2±2.5 mg/kg,as burned).Organic and elemental carbon represented 3.1 to 30 wt.% of the particle mass,while carbonate(CO_3~(2-))accounted for between 2.3 and 8.5 wt.%.The particulate mass was mainly composed of inorganic matter(71% to 86% of the PM_(2.5)mass).Compared to residential stoves,BFB combustion generated very high mass fractions of inorganic elements.Chloride was the water soluble ion in higher concentration in the PM_(2.5)emitted by the combustion of eucalypt,while calcium was the dominant water soluble ion in the case of pine.     

Understanding the factors that influence household use of clean energy in the Similipal Tiger Reserve,India

Biotic pressure in and around protected areas (PA) is the primary cause of biodiversity loss in many developing countries across the globe. The pressure comes partly from biomass energy dependency in the form of heavy extraction of fuelwood from the forests. Although biomass fuels provide easily accessible and affordable sources of domestic energy to the rural masses, their combustion results in environmental and health‐related hazards. The objectives of this paper are to assess the patterns of household energy use in a subsistence forest economy and analyze the factors that influence their energy use choice for cooking and lighting. The paper uses primary data collected randomly from 244 households located in and around the Similipal Tiger Reserve (STR), situated in the eastern Indian state of Odisha. Age of the household head, number of days in wage employment, number of adult males and females in a household, education of the household head and landholding size are found to be the major variables that determine household fuelwood collection sources inside the reserve. Considering household structure as an income indicator, the analysis clearly shows that non‐poor households prefer to use clean energy (i.e. solar) for lighting, while poor households tend to use solid fuel. Energy policies for development should be based on the realistic proposition that fuelwood will remain the major source of energy for cooking for substantial proportions of the world’s population. Promotion of public education, social forestry schemes and fuel‐efficient improved chulhas should be encouraged in order to reduce household dependence on fuelwood. Moreover, devolving sufficient property rights over forest resources to local communities may help secure their broad‐based and active participation in the decision‐making process, which may result in a positive change in the attitude of the local people towards biodiversity conservation.     

Removal of mercury from sediment by ultrasound combined with biomass (transgenic Chlamydomonas reinhardtii)

As one of the most pervasive environmental problems, Hg pollution in sediment is particularly difficult to remediate because it cannot be decomposed. The application of ultrasound combined with biomass (transgenic Chlamydomonas reinhardtii (C. reinhardtii), a green alga) for the removal of Hg from model and contaminated sediments (Al₂O₃, α-HgS, and PACS-2 marine sediment) was investigated in this study. Ultrasound was found to enhance Hg release from Al₂O₃, α-HgS, and PACS-2 marine sediment into the aqueous phase compared to mechanical shaking. A transgenic C. reinhardtii (2AMT-2) expressing a plasmamembrane-anchored metallothionein polymer effectively recovered Hg(II) released into the aqueous phase by sonication over a broad pH range from 2.0 to 9.0. The results showed that this combined technique of ultrasound and alga biomass (2AMT-2) engineered for enhanced metal recovery was effective to remove Hg from solids and sediments, especially from Al₂O₃ and α-HgS with no natural organic matter. The results of this study are discussed with respect to the development of in situ remediation techniques for Hg-contaminated sediments.     

MODIS derived fire characteristics and aerosol optical depth variations during the agricultural residue burning season, north India

Agricultural residue burning is one of the major causes of greenhouse gas emissions and aerosols in the Indo-Ganges region. In this study, we characterize the fire intensity, seasonality, variability, fire radiative energy (FRE) and aerosol optical depth (AOD) variations during the agricultural residue burning season using MODIS data. Fire counts exhibited significant bi-modal activity, with peak occurrences during April-May and October-November corresponding to wheat and rice residue burning episodes. The FRE variations coincided with the amount of residues burnt. The mean AOD (2003-2008) was 0.60 with 0.87 (+1σ) and 0.32 (−1σ). The increased AOD during the winter coincided well with the fire counts during rice residue burning season. In contrast, the AOD-fire signal was weak during the summer wheat residue burning and attributed to dust and fossil fuel combustion. Our results highlight the need for ‘full accounting of GHG’s and aerosols’, for addressing the air quality in the study area.     

Growth and fecundity of earthworms: <Emphasis Type="Italic">Perionyx excavatus</Emphasis> and <Emphasis Type="Italic">Perionyx sansibaricus</Emphasis> in cattle waste solids

Epigeic earthworms (Oligochaeta) have been appeared as key organisms to convert organic waste resources into value-added products, i.e., vermicompost and worm biomass. The assessment of reproduction potential of composting earthworm may be beneficial for large-scale earthworm production. Although, the waste minimizing potential of Perionyx excavatus and Perionyx sansibaricus is well proved, but little information is available about their fecundity rate. In this study, the efforts have been made to explore the growth and reproduction biology of P. excavatus and P. sansibaricus, using cattle waste solid as culture substrate, under laboratory conditions. Earthworms were weighed weekly and number of cocoons produced per week assessed. Biomass productions, fecundity, maturation, natality all were significantly different between P. excavatus and P. sansibaricus. The highest mean individual biomass was 767.7 ± 18.4 mg and 612.6 ± 20.6 mg, respectively in P. sansibaricus and P. excavatus. However, the highest cocoon numbers occurred in P. excavatus (492.3 ± 13.6), significantly higher than P. sansibaricus (269.6 ± 17.1). Fecundity was slightly different in both species: 1.38 ± 0.77 cocoons adult worm⁻¹ week⁻¹ (P. excavatus) and 1.58 ± 0.74 cocoons adult worm⁻¹ week⁻¹ (P. sansibaricus). The hatchling success rate (%) was highest in P. excavatus. Overall natality (juveniles adult⁻¹ week⁻¹) was highest in P. sansibaricus (1.52) than P. excavatus (1.26), which suggests that P. sansibaricus may be a better candidate for rapid propagation of earthworms in cattle waste solid.     

Application of recycled paper sludge and biomass materials in manufacture of green composite pallet

Rice straw, rice husk and paper sludge are by-products and industrial waste, and are beneficial resources as raw biomass materials used for manufacturing value-added composite products. We investigated the effect on selected mechanical properties of adding rice straw, rice husk and paper sludge to wood composites to replace wood particles for manufacturing green pallets. Results showed that increasing the contents of rice straw and rice husk dramatically decreased the mechanical strength of the composites. This is because the wax and silicate coating of these materials obstructed the strong bonding with UF resin. When 10 wt.% of wood particle was replaced with 10 wt.% of paper sludge, the wood–paper sludge composites showed similar mechanical properties to those of wood particle. Wood particle can be replaced by 10 wt.% of dried paper sludge in accordance with the minimum requirement recommended by standards in green pallet manufacturing.     

Determination of levoglucosan and its isomers in size fractions of aerosol standard reference materials

The present study tested the extraction efficiency and quantification reproducibility of anhydrosugars in a series of NIST SRMs using two extraction protocols and isotopically-labeled (d₇-levoglucosan) vs. chemically analogous (sedoheptulosan) surrogates. In both instances, levoglucosan concentrations in the different versions of the Washington, D.C. urban dust standard (SRM 1649, 1649a, 1649b, and RM 8785) were similar. The present test also showed that levoglucosan concentrations were not affected by long-term shelf storage of dry material. Variability of analyses were similar for both surrogates and averaged <5%. Surrogate recoveries were shown to average 103 ± 7% and 97 ± 7% for d₇-levoglucosan and sedoheptulosan, respectively. The choice of solvent was shown to affect recoveries the most (but not variability). Levoglucosan concentrations were either seriously underestimated or overestimated with ethyl acetate extraction when d₇-levoglucosan or sedoheptulosan was used as surrogate, respectively. These results point to the need to use some fraction of polar solvent (i.e. methanol) in the solvent mixture. Anhydrosugar concentrations in the urban dust from the Czech Republic (candidate SRMs 2786 and 2787) were characterized by 3- to 7-fold higher anhydrosugar concentrations than those observed in the Washington, D.C. urban dust. The internal anhydrosugar signatures (i.e. levoglucosan/mannosan ratio: L/M) confirm the predominance of biomass combustion sources in both SRM series with mixed inputs from hardwood and softwood combustion in the Washington, D.C. urban dust and a predominantly softwood source in the Prague urban dust. The uniform distribution of anhydrosugars, across the particle size distribution of both SRM series, confirms earlier studies that low temperature charred materials contribute significant inputs to atmospheric ultrafine particles with long atmospheric residence time and transport ranges.     

The Indian perspective of utilizing fly ash in phytoremediation, phytomanagement and biomass production

Coal-based power generation is a principal source of electricity in India and many other countries. About 15–30% of the total amount of residue generated during coal combustion is fly ash (FA). FA is generally alkaline in nature and contains many toxic metals like Cr, Pb, Hg, As and Cd along with many essential elements like S, B, Ca, Na, Fe, Zn, Mn and P. Dumped FA contaminates the biosphere by mobilization of its fine particles and hazardous metals. Despite the negative environmental impact of FA, coal continues to be a major source of power production in India and therefore FA disposal is a major environmental issue. To overcome this problem, FA dumping sites have been started as a potential resource for biomass production of tree species. Phytoremediation is a strategy that uses plants to degrade, stabilize, and remove contaminants from soils, water and waste FA. Phytomanagement of FA is based on the plants' root systems, high biomass, woody nature, native nature, and resistance to pH, salinity, and toxic metals. Recently Indian researchers mostly from the National Botanical Research Institute have been working on phytoremediation and revegetation of FA dykes, inoculation of bacterial strains for reducing FA stress and biomass production from FA dykes. Many international researchers have worked on reclamation, revegetation and utilization of FA. FA utilization saves resources, mainly land (topsoil), water, coal, limestone and chemical fertilizer. Safe utilization of FA is a major concern around the world and regulatory bodies are enforcing stringent rules for the proper management of FA. This article summarizes various viable avenues in India for FA utilization and environmental management.     

Comparison of a diurnal vs steady-state ozone exposure profile on growth and yield of oilseed rape (Brassica napus L.) in open-top chambers in the Yangtze Delta, China

Most available exposure-response relationships for assessing crop loss due to elevated ozone (O₃) have been established using data from chamber and open-top chamber experiments, using a simulated constant O₃ concentration exposure (square wave), which is not consistent with the diurnal variation of O₃ concentration that occurs in nature. We investigated the response of oilseed rape (Brassica napus L.) to O₃ as affected by two exposure regimes: one with a diurnal variation (CF100D) and another with a constant concentration (CF100). Although the two exposure regimes have the same mean O₃ concentration and accumulated O₃ concentration above 40 ppb (AOT40), our results show that O₃ at CF100D reduced biomass and number of pods/plant more than O₃ at CF100. Both O₃ exposures resulted in larger seed weights/100 pods compared to CF. Numbers of seeds/100 pods were reduced by CF100, while numbers of seeds/100 pods in the CF100D chambers were comparable to those in CF. Our results suggest that chamber experiments that use a constant O₃ exposure may underestimate O₃ effects on biomass and yields.     

Optimal planning of co-firing alternative fuels with coal in a power plant by grey nonlinear mixed integer programming model

Energy supply and use is of fundamental importance to society. Although the interactions between energy and environment were originally local in character, they have now widened to cover regional and global issues, such as acid rain and the greenhouse effect. It is for this reason that there is a need for covering the direct and indirect economic and environmental impacts of energy acquisition, transport, production and use. In this paper, particular attention is directed to ways of resolving conflict between economic and environmental goals by encouraging a power plant to consider co-firing biomass and refuse-derived fuel (RDF) with coal simultaneously. It aims at reducing the emission level of sulfur dioxide (SO(2)) in an uncertain environment, using the power plant in Michigan City, Indiana as an example. To assess the uncertainty by a comparative way both deterministic and grey nonlinear mixed integer programming (MIP) models were developed to minimize the net operating cost with respect to possible fuel combinations. It aims at generating the optimal portfolio of alternative fuels while maintaining the same electricity generation simultaneously. To ease the solution procedure stepwise relaxation algorithm was developed for solving the grey nonlinear MIP model. Breakeven alternative fuel value can be identified in the post-optimization stage for decision-making. Research findings show that the inclusion of RDF does not exhibit comparative advantage in terms of the net cost, albeit relatively lower air pollution impact. Yet it can be sustained by a charge system, subsidy program, or emission credit as the price of coal increases over time.