A conceptual approach to model sand–gravel extraction from rivers based on a game theory perspective

Sand–gravel mining is a significant parameter of economic development and social welfare function in modern societies. As demand for aggregate increases in construction industry, conflicts for the availability of the resource and environmental impacts become more intense. The present paper describes the contested status quo in riverbed sand–gravel mining activities with an example from Greece, as a case study. The scope is to propose a methodology about good governance of the mining sector that promotes a sustainable sharing of aggregate resource by securing environment and safekeeping revenues in the mining trade market.     

地表水环境质量综合评价方法研究与应用进展

水质评价是目前水环境质量管理的重要支撑,水质综合评价方法已经逐渐由断面评价向流域综合评价进行转变与突破。该文对目前的断面水质评价方法进行了归类综述,并且对流域水质综合评价方法及其在各个国家流域的应用进行了重点评述。分析认为中国在流域评价中所使用的"断面比例法"不够准确,缺乏污染物时空分析以及生物评价等问题,并据此提出了未来的研究方向,为未来地表水质评价方法的提升以及水环境管理的完善提供科学的参考依据和建议。     

石英砂滤料表面润湿改性

采用硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂对石英砂进行表面改性,以制备亲油疏水性滤料。研究得出,钛酸酯偶联剂改性石英砂的最佳工艺条件为:偶联剂用量15%,反应温度90℃,搅拌时间15 min;硅烷偶联剂和铝酸酯偶联剂改性石英砂的最佳工艺条件均为:偶联剂用量15%,反应温度110℃,搅拌时间15 min。水对钛酸酯偶联剂改性石英砂滤料的润湿重量由改性前的1.5589 g降低到0.0282 g,水对硅烷偶联剂改性石英砂滤料的润湿重量降低到0.0607 g,水对铝酸酯改性石英砂滤料的润湿重量降低到0.2664 g。静态吸附实验表明,硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂改性石英砂滤料对油的吸附容量分别增加了33.67%、42.87%和22.30%。XPS和FT-IR分析表明,偶联剂均以化学键的方式包覆在石英砂滤料表面,结合稳定。     

燃煤电厂在线监测系统颗粒物浓度排放系数影响因素的探讨

选取上海市7家未安装气-气换热器的国控燃煤电厂作为研究对象，从煤质、除尘器、脱硫协同脱除作用以及锅炉工况负荷等方面探讨对颗粒物浓度排放系数 K值产生的影响，得出上述因素通过改变脱硫进口颗粒物浓度值影响 K值，当脱硫进口颗粒物浓度较低、波动范围较小时，其 K值也维持相对稳定的状态；当脱硫进口颗粒物浓度较高、波动范围较大时，其 K值也会发生较大的变化等结论。     

近距煤层无煤柱协调开采布局研究与应用*

为了解决老母矿近距煤层的开采难题,通过理论分析并利用FLAC 3D数值模拟软件进行模拟,分析出煤层前后推进150 m是最合理的步距，侧向采动支撑压力在15~50 m内存在影响。基于这些理论数据，确定回采巷道的合理位置,进而确定以内错距离范围为30~60 m的内错式布置方式布置巷道和无煤柱协调开采布局，并进行井下工程应用。最后把无煤柱协调开采布局与双巷掘进开采布局对比，得出无煤柱协调开采布局的先进性和优势，研究结果可为同类条件下的工程应用提供借鉴。     

煤矿采空塌陷对地下水的影响

在煤炭开采过程中,煤炭被采出后其所在地下煤层会形成一定区域的采空区,并使煤层上方的顶板岩层失去支撑,由于顶板岩层的抗拉强度比较有限,因此在其顶板岩层自身重力与上覆岩层压力的影响下,很容易因顶板断裂、破碎而出现采空塌陷问题,这不仅会影响煤矿所在区域的生态安全,同时还会使地下水受到较大的负面影响。为此,本文结合煤矿采空塌陷的特点,围绕采空塌陷对地下水的影响展开了分析,并在此基础上提出了一些较为可行的采空塌陷区域地下水治理保护建议。     

Nitrogen evolution during the co-combustion of hydrothermally treated municipal solid waste and coal in a bubbling fluidized bed

Nitrogen evolution was studied during the co-combustion of hydrothermally treated municipal solid wastes (HT MSW) and coal in a bubbling fluidized bed (BFB). HT MSW blending ratios as 10%, 20% and 30% (wt.%) were selected and tested at 700, 800, 900 °C. Emissions of NO and N₂O from blends were measured and compared with the results of mono-combustion trials. Moreover, concentrations of precursors like NH₃ and HCN were also quantified. The results are summarized as follows: NO emissions were predominant in all the cases, which rose with increasing temperature. The blending of HT MSW contributed to the NO reduction. N₂O emissions decreased with temperature rising and the blending of HT MSW also presented positive effects. At 30% HT MSW addition, both NO and N₂O emissions showed the lowest values (391.85 ppm and 55.33 ppm, respectively at 900 °C). For the precursors, more HCN was detected than NH₃ and both played important roles on the gas side nitrogen evolution.     

城市生态系统复合下垫面碳通量特征——以上海市奉贤大学城为例

随着城市化进程的加速和城市人口规模的增加,城市已成为最大的碳源,研究城市生态系统对大气二氧化碳的贡献成为碳循环研究的焦点问题之一。基于研究区域内土地利用现状和一年的涡动观测系统观测数据,结合地理信息技术(Arc GIS)和通量计算工具(Eddypro及ART Footprint Tool)以及碳通量足迹模型分析了上海奉贤大学城碳通量足迹特征,基于此探讨不同下垫面类型,包括以草本和木本等透水层为主的下垫面(称为自然系统),以建筑物、道路等不透水层为主的下垫面(称为社会系统)碳通量的变化特征。研究结果表明:1)在不同风向上,碳通量贡献区范围随着大气稳定度的增加而扩大。大气处于稳定条件下,非主风向上的碳通量贡献区范围(最大范围1 100 m)比主风向上的碳通量贡献区范围(最大范围780m)要大;当大气处于不稳定条件下时主风向和非主风向下的碳通量贡献区范围相差不大(最大范围分别为321和351m)。2)不同下垫面其源汇特征不同,以绿色植物为主的自然系统年碳通量均值为–4.1μmol/m~2/s,表现为碳汇;社会系统的年碳通量均值为8.6μmol/m~2/s,表现为碳源。3)自然系统的碳通量日变化具有较明显的季节分异,变化特征大致呈"U"型;社会系统的碳通量日变化没有明显的季节分异,变化特征大致呈"M"型。绿色植物对城市生态系统的大气二氧化碳有降低作用,结合自然和社会系统的碳通量变化特征可以为以后合理规划城市布局,建立低碳城市提供服务。     

Does the Temporal Resolution of Precipitation Input Influence the Simulated Hydrological Components Employing the SWAT Model?

This study aimed to evaluate the influence of sub‐daily precipitation time steps on model performance and hydrological components by applying the Green and Ampt infiltration method using the Soil and Water Assessment Tool (SWAT). Precipitation was measured at a resolution of 0.1 mm and aggregated to 5‐, 15‐, 30‐, and 60‐min time steps. Daily discharge data over a 10‐year period were used to calibrate and validate the model. Following a global sensitivity analysis, relevant parameters were optimized through an automatic calibration procedure using SWAT‐CUP for each time step. Daily performance statistics were almost equal among all four time steps (NSE ≈ 0.47). Discharge mainly consisted of groundwater flow (55%) and tile flow (42%), in reasonable proportions for the investigated catchment. In conclusion, model outputs were almost identical, showing simulations responded nearly independently of the chosen precipitation time step. This held true for (1) the selection of sensitive parameters, (2) performance statistics, (3) the shape of the hydrographs, and (4) flow components. However, a scenario analysis revealed that the precipitation time step becomes important when saturated hydraulic conductivities are low and curve numbers are high. The study suggests that there is no need in using precipitation time steps <1 h for lowland catchments dominated by soils with a low surface runoff potential if daily flow values are being considered. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

气相分子吸收光谱法测定地表水中硫化物

采用气相分子吸收光谱法测定地表水中硫化物,方法检出限为0.002 mg/L,水样加标回收率为96.5%~107%,精密度(RSD,n=6)为0.08%~1.38%。实验结果表明:该方法准确可靠、灵敏度好、操作简便,适用于地表水中硫化物分析要求。