SATURATED SOIL HYDRAULIC CONDUCTWITY IN LOBLOLLY PINE PLANTATIONS ON DRAINED SITES1

ABSTRACT: Variation of in situ measured saturated hydraulic conductivity (KS) with stand age was examined in drained and intensively managed loblolly pine (Pinus taeda L.) plantations on very poorly drained Bayboro loam soils. Stand ages studied were 1-year-old and 14-years old. No differences in Ks values were found between the stand ages. In addition, no differences in core measured soil properties were found between the stand ages, indicating that there were no differences in the pore structure of the soil matrix. There was large variation of Ks within stands and between stands within ages. The mean within stand Ks values ranged from 0.66 cm/hr to 4.85 cm/hr. The frequency of tests exhibiting pipe flow through large non-capillary voids was significantly greater in the older stands; however, the continuity of the voids in the soil, and whether or not non-Darcy type flow would occur in a saturated profile, could not be determined.     

VARIABILITY OF SOIL WATER PROPERTIES AND CROP YIELD IN A SLOPED WATERSHED1

ABSTRACT: Spatial distribution of soil and water properties and the correlations between them and crop yield were determined for a natural rainfall environment. Hydraulic conductivity, soil texture, water retention, and soil-water flux were variables used to investigate their relationship to crop yield using multiple regression techniques. Variations in crop yields on a watershed with a 3 to 4 percent slope and moderately erosive soils were related to soil-water characteristics and soil properties along slope and with depth. Climatic conditions to sustain crop growth and yield ranged from inadequate soil water in 1983 to adequate soil water in 1984. Crop yield was predicted with models using both available and measured soil-water content. Available water content provided a better model for the prediction of water yield and does not require field measurements of actual soil-water content. Soil water holding capacity was more significant for predicting crop yield in soils with moderate to high silt content than infiltrability of water into the soil.     

PCM thermal conductivity effect on mechanism of PV/PCM thermal control characteristics

ABSTRACT

According to the structure of photovoltaic/phase change material (PV/PCM), the mechanism of internal heat transfer, transmission, storage, and temperature control is analyzed, and a two-dimensional finite element analysis model of PV/PCM structure is established. This study is carried out on the effect of PCM thermal conductivity on internal temperature distribution characteristics of PV/PCM and temperature control characteristics of solar cells. The results show that the increase in thermal conductivity of PCM can prolong the temperature control time of solar cell in PV/PCM system, for example, when the thermal conductivity is increased from 0.2 W/(m·K) to1.5 W/(m·K) under a thickness of 4 cm, the duration when PV/PCM solar cell temperature is controlled below 40°C and extended from 52 min to 184 min. In addition, PV/PCM experimental prototypes are designed with the LA-SA-EG composite PCM peak melting point of 46°C and thermal conductivity of 0.8 W/(m·K) and 1.1 W/(m·K), respectively. The results indicate that compared with PCM-free solar cells, the maximum temperature of PV/PCM prototype solar cells with thermal conductivity of 0.8 W/(m·K) and 1.1 W/(m·K) is reduced by 10.8°C and 4.6°C, respectively, with average output power increased by 4.1% and 2.2%, respectively, under simulated light sources. Under natural light conditions, the average output power is increased by 6.9% and 4.3%, respectively. The results provide theoretical and experimental basis for the optimization of PV/PCM design by changing the thermal conductivity of PCM.     

MODELING INFILTRATION WITH VARYING HYDRAULIC CONDUCTWITY UNDER SIMULATED RAINFALL CONDITIONS1

ABSTRACT: Physically-based models are extensively used to simulate the infiltration process under varied field conditions. Most models are based on the deterministic nature of input parameters related to the flow process (such as hydraulic conductivity). These models yield poor predictions of infiltration rates because they do not include the field-scale variations of flow parameters. The paper presents an approach for integrating the field-scale variability of hydraulic conductivity with an infiltration model to simulate infiltration under the rainfall conditions. A model describing the spatial structure of hydraulic conductivity has been developed using stochastic techniques. The stochastic structure of hydraulic conductivity was then incorporated in the Green-Ampt and Mein-Larson infiltration model. The model outputs on the instantaneous infiltration rates and cumulative infiltration were evaluated using the field infiltration data measured under simulated rainfall conditions. The results show that the combined model is capable of rep. resenting the instantaneous infiltration rates and cumulative infiltration of the study soils. The model may, therefore, be used to simulate the rainfall infiltration process for spatially-variable soils under the field conditions.     

Hydrological setting of infertile species-rich wetland--a case study in the warm temperate Japan

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｐｅａｔｌｅｓｓｍｉｒｅ(Ｗｏｌｅｊｋｏ ,1986;Ｆｉｇ .1ａ)ｉｓｄｅｃｒｅａｓｉｎｇｅｘｔｅｎｓｉｖｅｌｙｄｕｅｔｏｔｈｅａｂａｎｄｏｎｍｅｎｔｏｆｔｒａｄｉｔｉｏｎａｌｍａｎａｇｅｍｅｎｔ,ｉｎｆｌｏｗｏｆｔｈｅｗａｓｔｅｄｗａｔｅｒ,ｆｉｒｅ,ｍｏｗｉｎｇ ,ｒｅｃｌａｉｍｉｎｇａｎｄｏｔｈｅｒａｒｔｉｆｉｃｉａｌｉｍｐａｃｔｓｉｎｔｈｅｍｏｄｅｒｎｌａｎｄｓｃａｐｅｏｆｓｏｕｔｈｗｅｓｔｅｒｎＪａｐａｎ(Ｆｕｊｉｗａｒａ ,1979) .Ｍｉｒｅｏｆｔｈｉｓｔｙｐｅｉｓｎｏｗ…     

Use of tandem circulation wells to measure hydraulic conductivity without groundwater extraction

Conventional methods to measure the hydraulic conductivity of an aquifer on a relatively large scale (10-100 m) require extraction of significant quantities of groundwater. This can be expensive, and otherwise problematic, when investigating a contaminated aquifer. In this study, innovative approaches that make use of tandem circulation wells to measure hydraulic conductivity are proposed. These approaches measure conductivity on a relatively large scale, but do not require extraction of groundwater. Two basic approaches for using circulation wells to measure hydraulic conductivity are presented; one approach is based upon the dipole-flow test method, while the other approach relies on a tracer test to measure the flow of water between two recirculating wells. The approaches are tested in a relatively homogeneous and isotropic artificial aquifer, where the conductivities measured by both approaches are compared to each other and to the previously measured hydraulic conductivity of the aquifer. It was shown that both approaches have the potential to accurately measure horizontal and vertical hydraulic conductivity for a relatively large subsurface volume without the need to pump groundwater to the surface. Future work is recommended to evaluate the ability of these tandem circulation wells to accurately measure hydraulic conductivity when anisotropy and heterogeneity are greater than in the artificial aquifer used for these studies.     

电器实验室安全和环境监控措施探讨

电器实验室在对电器产品实施安全性能检测的过程中，实验室本身存在着安全和环境污染问题。如何对实验室的日电器实验室在对电器产品实施安全性能检测的过程中，实验室本身存在着安全和环境污染问题。如何对实验室的日常运作进行安全和环境的有效监控，对于保护实验室仪器设备和生命财产安全，以及试验人员的健康，具有重要的意义。 电器实验室安全和环境问题涉及但不限于防火、防烫伤、防暴、防触电、防机械伤害、防淋水、防盗、限制区域的禁入、仪器设备的保护、试验负荷控制、环境温度、湿度、电网电压、谐波畸变、噪音、有毒有害气体、电磁渡污染等诸多方面。本文针对电器实验室存在的一些主要安全和环境问题，从经济和技术可行性方面研究有效解决方法，并提出一种利用现代科技实现远程综合监控的方案。     

Influence of workpiece materials on aerosol emission from die sinking electrical discharge machining process

Simultaneous investigation of environmental emissions and machining aspects of electrical discharge machining process is essential for achieving hygienic and efficient machining. The main objective of the present work is to experimentally investigate and analyze the aerosol emission rate and the material removal rate from a die sinking electrical discharge machining process for three commonly used work piece materials viz., tool steel, mild steel and aluminum using Taguchi methodology of Experimental Design in order to suggest suitable process conditions for green manufacturing. The aerosol emission profile of all workpiece materials was found to be closely related to the material removal profile. A significant variation in emission and material removal rate was observed for workpiece materials which may be accorded to the variation in melting and vaporization temperatures. It was also observed that majority of aerosol constituents evolved from workpiece materials and that the constituents with low melting points were having high relative concentration in the aerosol emitted. The study introduced a parameter, the relative emission rate for comparing the emission for various process parameters and workpiece–tool material combinations. The favorable machining parameters for each material were then identified by employing signal to noise ratio analysis of the relative emission rate.     

兆欧表的禁忌分析与防范措施

通过对电气领域的电气安全问题长期研究以及对测试工作中经验、教训的总结,针对兆欧表在电气领域应用中的十六种不正确、不妥当的使用方法,对其错误及危害性逐项进行分析探讨,并提出了相应的改进办法及防范措施。实践表明,这些改进办法及防范措施在电气技术工作和安全生产管理中具有一定的实用价值。     

填埋场衬层渗漏的电学法检测研究进展

综述了几种常用的填埋场渗漏检测方法,指出电学法已成为填埋场不同运行阶段（施工期和运营期）渗漏检测的主流方法。分析了各阶段电学检测方法的适用条件和优缺点,在防渗膜铺设阶段,常利用双电极法或电极-偶极子法进行施工完整性检测;在填埋场运营期间,根据场地实际情况可以选择电极格栅法、基于物联网的监测预警云平台、阵列式偶极子法或高密度电法进行膜渗漏检测及长期监测。