应用流式细胞仪监测太湖藻类初探

流式细胞仪在海水微型浮游生物监测领域应用较为广泛,但在淡水藻类定量研究以及生物监测中应用仍较少。探讨了应用便携式浮游植物流式细胞仪CytoSense监测太湖藻类的可行性和时效性。结果表明,为了提高检测结果的准确性,流式细胞仪的应用过程中最好是现场采样、现场分析。流式细胞仪对藻细胞密度的检测下限为100万个/L,大于100万个/L时检测结果与人工镜检结果相吻合;在悬浮物含量小于108 mg/L的水体中,流式细胞仪检测结果具备较高的准确性。另外,流式细胞仪操作简单、分析速度快、便携性好、无污染,在太湖藻类监测中具有一定应用前景。     

River systems as providers of goods and services: a basis for comparing desired and undesired effects of large dam projects

In developing countries, large dam projects continue to be launched, primarily to secure a time-stable freshwater supply and to generate hydropower. Meanwhile, calls for environmentally sustainable development put pressure on the dam-building industry to integrate ecological concerns in project planning and decision-making. Such integration requires environmental impact statements (EISs) that can communicate the societal implications of the ecological effects in terms that are understandable and useful to planners and decision-makers. The purpose of this study is to develop a basic framework for assessing the societal implications of the river ecological effects expected of a proposed large dam project. The aim is to facilitate a comparison of desired and potential undesired effects on-site and downstream. The study involves two main tasks: to identify key river goods and services that a river system may provide, and to analyze how the implementation of a large dam project may alter the on-site capacity and downstream potentials to derive river goods and services from the river system. Three river goods and six river services are identified. River goods are defined as extractable partly man-made products and river services as naturally sustained processes. By four main types of flow manipulations, a large dam project improves the on-site capacity to derive desired river goods, but simultaneously threatens the provision of desirable river goods and services downstream. However, by adjusting the site, design, and operational schedule of the proposed dam project, undesirable effects on river goods and services can be minimized.     

Illinois redesigns its ambient water quality monitoring network

Illinois has been operating an ambient water quality network of almost 600 stations for several years. In 1977 changes in program emphasis toward intensive monitoring, the need for improved procedures and quality control in monitoring operations, and the desire to create a single data base of all Illinois State monitoring data, resulted in a redesign of the ambient monitoring program.A unique cooperative program between the Illinois Environmental Protection Agency and the US Geological Survey provides for their monitoring a portion of the network. The Survey provides flow data at most network stations as well as extensive manpower training, equipment, data processing, and program quality control. Informal agreements with other agencies have permitted a great reduction in the monitoring effort required by the Illinois Environmental Protection Agency.     

Experimental study of the transport properties of rough self-affine fractures

An experimental study of the transport properties of fluid-saturated joints composed of two complementary rough fracture surfaces, translated with respect to each other and brought in contact, is reported. Quantitative roughness measurements on different fractured granite samples show that the surfaces have a self-affine geometry from which the dependence of the mean aperture on the relative displacement of fracture surfaces kept in contact can be predicted. Variations of the hydraulic and electrical conductances of the joint are measured as functions of its mean aperture. A simple parallel plane model accounts for the global trend of the measurements, but significant deviations are observed when a relative lateral displacement of the surfaces is introduced. A theoretical analysis of their origin shows that they are due both to the randomness of the aperture field and to a nonzero local slope of the surface near the injection hole; the corresponding conductivity fluctuation amplitudes have power law and linear variations with the lateral displacement, and are enhanced by the radial injection geometry.     

Enhanced retention of linuron, alachlor and metalaxyl in sandy soil columns intercalated with wood barriers

A study has been made of the effect a reactive barrier made of pine (softwood) or oak (hardwood) wood intercalated in a sandy soil column has on the retention of linuron, alachlor and metalaxyl (pesticides with contrasting physicochemical characteristics). The leaching of pesticides has been carried out under a saturated flow regime and breakthrough curves (BTCs) have been obtained at flow rates of 1 mL min⁻¹ (all pesticides) and 3 mL min⁻¹ (linuron). The cumulative curves in the unmodified soil indicate a leaching of pesticides >80% of the total amount of compound added. After barrier intercalation, linuron leaching decreases significantly and a modification of the leaching kinetics of alachlor and metalaxyl has been observed. The theoretical R factors increased ∼2.6-3.3, 1.2-1.6-fold, and 1.4-1.7-fold and the concentration of the maximum peak decreased ∼6-12-fold, 2-4-fold and 1.2-2-fold for linuron, alachlor and metalaxyl, respectively. When considering the three pesticides, significant correlations have been found between the theoretical retardation factor (R) and the pore volume corresponding to the maximum peaks of the BTCs (r = 0.77; p < 0.05) or the total volume leached (r = −0.78; p < 0.05). The results reveal the efficacy of reactive wood barriers to decrease the leaching of pesticides from point sources of pollution depends on the type of wood, the hydrophobicity of the pesticide and the adopted water flow rate. Pine was more effective than oak in decreasing the leaching of hydrophobic pesticide linuron or in decreasing the maximum peak concentration of the less hydrophobic pesticides in soils. Efficacy of these wood barriers was limited for the least hydrophobic pesticide metalaxyl.     

FS—IV^＋流动注射仪测定地表水中氨氮

铵与碱性酚和次氯酸钠反应生成靛蓝化合物，其色度与铵的浓度成正比，亚硝基氰化物使蓝色增强，在660nm处测量吸光度值；采用Flow Solution-IV^＋（FS-IV^＋）流动注射仪测定地表水中氨氮，检测范围0～10．00mg／L，检出限0．008mg／L，分析速率51个样S／h；对方法精密度、准确度、加标回收进行了实验，结果令人满意。该方法具有自动进样、分析速率快、试剂耗量低等优点，可应用于大批量常规地表水分析。     

New methodological improvements in the Microtox® solid phase assay

The classic Microtox® solid phase assay (MSPA) based on the inhibition of light production of the marine bacteria recently renamed Aliivibrio fischeri suffers from various bias and interferences, mainly due to physico-chemical characteristics of the tested solid phase. To precisely assess ecotoxicity of sediments, we have developed an alternative method, named Microtox® leachate phase assay (MLPA), in order to measure the action of dissolved pollutants in the aqueous phase. Two hypotheses were formulated to explain the observed difference between MSPA and MLPA results: a real ecotoxicity of the solid phase or the fixation of bacteria to fine particles and/or organic matter. To estimate the latter, flow cytometry analyses were performed with two fluorochromes (known for their ability to stain bacterial DNA), allowing correction of MSPA measurements and generation of new (corrected) IC50. Comparison of results of MLPA with the new IC50 MSPA allows differentiating real ecotoxic and fixation effect in classic MSPA especially for samples with high amount of fines and/or organic matter.     

硫氰酸盐-抗坏血酸体系流动注射光度法测定水中钼

建立了水中钼的硫氰酸盐一抗坏血酸体系流动注射分光光度测定法，优化了试验条件。方法在0mg／L～16mg／L范围内线性关系良好，检出限为0．19mg／L，废水样品测定的RSD≤I．6％，加标回收率为96．3％～104％，与国家标准方法的测定结果一致。     

圆管空拔壁厚变化分析

此文利用主应力法推导出圆管空拔壁厚变化量解析式。该式计算结果与以定常三维流动上界解析同类问题结果相接近,且表达式简单,也与拔管的实验结果相一致。因而,可在圆管空拔壁厚计算时推广应用。     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.