The role of sorption and bacteria in mercury partitioning and bioavailability in artificial sediments

This study compared the relative importance of three types of sorption (organic matter-particle, mercury-organic matter and mercury-particle) in controlling the overall mercury partitioning and bioavailability in sediments. We found that all three types of sorption were important for both inorganic mercury (Hg) and methylated mercury (MeHg). Mercury-particle sorption was more important than mercury-fulvic acid (FA) sorption in increasing the mercury concentrations with increasing aging. Bioavailability (quantified by gut juice extraction from sipunculans) was mainly controlled by mercury-particle sorption, while FA-particle and mercury-FA sorption were not as important, especially for MeHg. Bacterial activity also increased the partitioning of Hg or MeHg in the sediments and was further facilitated by the presence of organic matter. The bioavailability of Hg or MeHg from sediments was only slightly influenced by bacterial activity. This study highlights the importance of sorption from various sources (especially mercury-particle sorption) as well as bacteria in controlling the partitioning and bioavailability of Hg or MeHg in sediments.     

Inorganic and methyl-mercury speciation in sediments of the Swarzędzkie Lake

Sediment samples were analysed for mercury and methylmercury content in different parts of the bottom sediment of Swarz ?dzkie Lake, which were influenced by different external pollution sources. The results of determination with two methods of mineralization using two separate media (HNO₃/H₂O₂ and HF) were compared. The accuracy of the studied methods was analysed using certified reference material IAEA 405 of river sediment. The recovery of mercury was satisfactory and ranged from 97.5 to 98.8%. Methylmercury compounds in the studied sediments were found in limited concentrations. Their concentrations ranged from 0.26 to 58.1 μg kg^?1, i.e. 1.0–7.4% of the total mercury content. The depth profile displayed high values of both total and methylmercury content at a depth of 10–20 cm, related to the heavy pollution of the lake in the 1980s. Canonical analysis displayed the relationship of both total mercury and methylmercury concentrations with organic matter and phosphorus content in bottom sediments.     

4A沸石去除水中Pb2＋的研究

在静态条件下，研究了4A沸石对废水中Pb2＋的吸附性能，并探讨了影响吸附的因素。实验表明：当温度为30℃，废水pH为5～6，0．01g4A沸石对100mg／LPb2＋溶液10mL吸附20min，Pb2＋的去除率可达到99％以上。在实验研究条件下，4A沸石对Pb2＋的吸附符合Langmuir和Freundlich等温吸附方程，相关系数为0．9819和0．9998。经计算，4A沸石对Pb2＋的饱和吸附量为125mg／g。4A沸石吸附水中Pb2＋达到吸附平衡的时间较短；溶液pH值的变化对吸附效果影响不显著；温度从室温略微升高，Pb2＋的去除率略有增大。吸附在4A沸石上的Pb“可回收利用，处理后的4A沸石可以再生，且重复使用性能较好。     

艾比湖水体中氯离子测定方法分析

用氯离子选择电极法测定艾比湖水体中氯离子的含量,对测定条件进行了探讨。结果表明,标准曲线在1.0×10-1~1.0×10-4mol/L内呈良好的线性关系,回收率为96.4%~103%,RSD为3.41%~4.34%,该方法简便、快速、准确,在实际工作中应用效果较为满意。     

无机纳米材料吸附分离放射性核素的研究进展

介绍了无机纳米材料特殊的理化性质,综述了纳米氧化物、纳米含氧酸盐和碳纳米管等无机纳米材料在放射性核素吸附分离中的研究进展。提出应对纳米材料进行负载、修饰或功能化研究,制备高性能的复合纳米材料,提高其稳定性和选择性;寻求更经济可行的制备方法,降低纳米材料的生产成本,逐步实现产业化;深入研究纳米材料对放射性核素的吸附机理;在辐射效应对纳米吸附剂的结构稳定性影响方面开展研究,并与现有方法作比较,评价其应用的有效性和可靠性。     

Ti（Ⅳ）催化臭氧／过氧化氢预处理酸性难降解废水

在Ti（Ⅳ）和过氧化氢存在条件下，考察了臭氧化酸性苯乙酮溶液、硝基苯溶液和垃圾渗滤液（浙江衢州某垃圾填埋场）的预处理效能。结果表明，在pH2．86条件下，单独臭氧化处理对苯乙酮、硝基苯和垃圾渗滤液的COD去除率分别为10．1％、44％和28．6％。BOD，／COD值分别从原来的0．039、0．060和0．085提高到了0．130、0．158和0．174，仍属生化难降解废水。当体系加入Ti（Ⅳ）后，臭氧化苯乙酮和硝基苯的COD去除率分别达到了75．5％和65％，BOD；／COD则提高到了0．679和0．314，可生化性提升明显。对于垃圾渗滤液，只有当体系加入Ti（Ⅳ）和H22后，臭氧化COD的去除率达到66．6％，BOD、／COD提高至0．425。上述结果对酸性难降解废水的处理实际意义非常突出。     

水环境中腐殖酸与镉离子结合作用的影响因素

通过测定不同化学条件下腐殖酸与镉离子作用后的游离态镉离子浓度及其结合率，研究各因素对腐殖酸与镉离子作用的影响。研究结果表明，pH值、离子强度、投加镉离子总浓度、腐殖酸浓度和反应温度均影响腐殖酸与镉离子的结合。pH值在4.5~6.5范围内，随pH值升高，腐殖酸与Cd²⁺的结合率增大，游离态Cd²⁺浓度减少。溶液的离子强度增大对结合反应有抑制作用。投加Cd²⁺总浓度的增大会导致结合态Cd²⁺浓度和游离态Cd²⁺浓度逐渐增加，而其结合率逐渐减小。腐殖酸浓度逐渐增大，使Cd²⁺和腐殖酸的结合率逐渐增大。在20℃~50℃范围内时，随反应温度升高，游离态Cd²⁺浓度逐渐减小，其结合率逐渐增加。     

NaCl改性沸石去除水中低浓度铅的研究

实验研究了NaCl改性沸石去除水中铅的效果,比较了沸石改性前后对铅的静态平衡吸附量变化,着重考察了吸附时间、pH值、竞争离子以及有机物对去除铅效果的影响。结果表明:NaCl改性沸石吸附铅速度快,对铅有很好的去除效果,平衡吸附量由改性前的28.57mg/g提高到了32.26mg/g。pH值对NaCl改性沸石去除水中铅的效果有较大影响,在pH=6～7时,去除效果最佳。水中竞争阳离子和有机物的存在,在一定程度上会降低铅的去除效果;随干扰物质浓度的升高,NaCl改性沸石对铅去除率出现了明显的下降,但当干扰物质和水样中铅浓度相当时,NaCl改性沸石可对铅保持很高的去除率。     

表面活性剂改性4A分子筛对Cr(VI)的吸附行为

采用浸渍法对4A分子筛进行表面改性,通过引入阳离子表面活性剂,使4A分子筛表面附着季铵型阳离子,并与反离子Br-形成"阴离子交换膜",从而促使更多的Cr(VI)阴离子通过离子交换吸附到改性4A分子筛上,通过X-射线衍射(XRD)和傅里叶变换红外光谱(FTIR)对样品的物相结构和组成进行表征分析。研究表明,表面活性剂的类型和疏水碳氢链结构会影响4A分子筛的吸附能力,十八烷基三甲基溴化铵(OTAB)碳氢链长,在分子筛表面形成的双分子层密,对Cr(VI)的吸附量最大。采用准一级、准二级、Elovich和Bangham动力学模型对六价铬的吸附数据进行拟合,其中准一级动力学方程最符合十八烷基三甲基溴化铵改性分子筛的吸附行为。同时,分别从Langmuir和Redlich-Peterson等温吸附模型获得六价铬的最大吸附量为13.98 mg/g,且改性分子筛以均一表面吸附为主。     

无汞开管法快速测定工业废水中的COD

文章对化学需氧量的几种测定方法进行对比,研究了无汞开管法快速测定方法的实验条件与干扰因素,并与标准方法进行对照,总结出炼油废水应用无汞开管法监测COD的适用范围与注意事项,可供同类企业应用该方法时借鉴。