Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.     

环境磁学在城市地表灰尘重金属污染研究中的应用

随着环境问题日渐突出,地表灰尘重金属污染日益成为研究热点。单纯采用化学方法监测重金属污染具有一定局限性,环境磁学方法以其简便、快捷、经济且无害化的特点在城市重金属污染研究中广为应用。通过文献调研,综述环境磁学在城市地表灰尘重金属污染研究中的应用与研究进展,阐明重金属的主要来源,简述环境磁学的诸多参数,分析磁学参数与重金属的关系,并通过对比不同的磁学分析方法,探讨环境磁学方法在城市地表灰尘重金属污染研究中存在的问题及其发展趋势。     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

Sulfamethoxazole sorption by sediment fractions in comparison to pyrene and bisphenol A

The environmental behavior of antibiotics has attracted great research attention. However, their sorption mechanisms in soils/sediments are still unknown. Comparison of the sorption properties between the widely-studied hydrophobic organic contaminants (HOCs) and antibiotics may provide valuable insight to antibiotic sorption mechanisms. Thus, in this study batch experiments for pyrene (PYR), bisphenol A (BPA), and sulfamethoxazole (SMX) sorption were conducted on a sediment sample and its separated fractions. Our results showed the high sorption of PYR on black carbon and organic matter. Although high sorption of SMX was observed for both separated organic fractions (humic acids) and inorganic mineral particles, the original sediment particles showed relatively low sorption. Competitive sorption between SMX and dissolved humic acid on mineral particles was observed in this study. This competitive interaction is a unique process for antibiotic sorption in soils/sediments compared with apolar HOCs and may be one of the important factors controlling the antibiotic sorption.     

福建省重点城市路面尘负荷及化学组成研究

采集并分析了福建省重点城市厦门、漳州、泉州和莆田城区具有代表性的57个地面扬尘和16个土壤样品的26种无机元素、8种水溶性离子和碳成分等组成.不同城市粒径≤100μm的路面尘负荷平均值在6.99 g.m-2与10.11 g.m-2之间,而粒径≤2.5μm的路面尘(PM2.5)负荷平均值在4.0 mg.m-2和12.5 mg.m-2之间.不同城市土壤尘和路面尘PM2.5中浓度最高的元素都是Si、Ca、Al、Fe和K,路面尘中Ca元素明显富集,而主要人为来源的重金属元素如Cu、Pb、Zn、Cr在路面尘PM2.5中的浓度显著高于土壤尘.漳州城区路面尘PM2.5中二次离子NH4+、NO3-和SO24-的含量明显高于其它地区,厦门、漳州和泉州城区路面尘PM2.5中Mg2+和Ca2+之间都存在显著的正相关关系.四城市路面尘中有机碳(OC)的含量均高于济南、石家庄以及北京地面扬尘OC的含量,元素碳(EC)的含量均低于北京地区路面扬尘EC的含量.泉州和莆田两地OC和EC的相关性较好,说明路面尘中OC和EC有相同或相似的来源.质量平衡结果显示泉州和莆田路面尘PM2.5中含量最高的是土壤尘,其次为有机物.按化学组成特征对路面尘PM2.5进行聚类解析,得到受大气沉降影响、受土壤尘影响、受大气沉降和土壤尘共同作用以及受土壤尘和建筑尘共同作用4类样品.     

大气颗粒物及降尘中重金属的分布特征与人体健康风险评价

为了解PM_(2.5)、PM_(10)和降尘中Cu、Mn、Pb、Ti、V、Cd、Cr、Co、Mo、Ni等10种重金属元素的分布特征及人体健康风险,利用大流量颗粒物采样器采集了北京城区某地四季大气中PM_(2.5)、PM_(10)及降尘样品,用ICP-MS测定了上述10种金属元素的质量浓度.结果表明,PM_(2.5)和PM_(10)的年均质量浓度分别为153.40μg·m~(-3)和232.93μg·m~(-3),超出GB 3095-2012中二类环境功能区标准限值的5倍和3倍;PM_(2.5)/PM_(10)的均值为0.74,表明大气颗粒物中以粒径小于2.5μm的颗粒为主;后向轨迹分析结果表明外源颗粒物的来向随季节变化而改变,冬、春、夏、秋季主要来向为西北、北-东北、东南、东南-西北.PM_(2.5)和PM_(10)中10种元素的年均质量浓度从高到低依次为TiMnPbCuCrNiVCdMoCo,其中Ti、Mn、Pb、Cu和Cr这5种元素占10种目标元素总质量浓度的91.93%和92.49%.除PM_(10)中Cd年均质量浓度(6.53 ng·m~(-3))高于GB 3095-2012限定值(5.00 ng·m~(-3))外,其他元素的质量浓度均不超标.降尘中各元素的含量由高到低依次为TiMnPbCuNiCrVCoMoCd,Ti(2561.48μg·g~(-1))占所有元素的质量分数为72.57%,地累积指数(Igeo)结果表明,Cd(4.03)属重度污染,Pb(2.49)介于中度污染和重度污染之间,Cu(1.33)属中度污染,Ni(0.43)属轻微污染.重金属的致癌健康风险(10-4)和非致癌健康风险(1),均处于较低水平,短期内不会对人体健康造成威胁,但不能忽视长期处于此环境所带来的健康危害.     

北京市铺装道路降尘污染特征及来源

为研究北京市道路降尘在不同季节的污染特征及来源,选取北京市4条典型道路得到64个采样点的道路尘样品,采集的道路尘样品经过预处理得到75 μm以下的颗粒物,经过再悬浮及实验室分析得到PM_2.5的粒径分布和化学成分谱.结果表明:不同采样高度及不同道路类型的颗粒物粒径大体分布规律一致,颗粒物质量频率存在三个峰值,分别为0.75 μm（微粒径）、2.50 μm（小粒径）、4.50 μm（大粒径）;各季节的降尘颗粒物的化学组分中质量分数最大的是元素,主要元素（含量>1%）季节变化为冬季>春季>秋季>夏季,元素富集因子法得到污染元素为Cr、Cd、Sn、Cu、Zn、Pb、As,双重元素为Bi、Ti、Ni、W、Mg、Ca、TI、Mo、V、Fe、Zr、Ba,其余16种为非富集元素;颗粒物中离子质量分数在夏季最大为9.31%,春季、秋季、冬季的离子质量分数相差不大,其中Ca2+、NO₃-、Cl-、SO₄2-占总离子质量的80%左右;碳素中w（OC）和w（EC）的季节变化均为夏季>秋季>春季>冬季,OC/EC[w（OC）/w（EC）]的季节变化规律为冬季>春季>秋季>夏季.不同季节w（OC）和w（EC）的相关性大小为夏季>秋季>春季>冬季.对PM_2.5中化学组分来源分析表明,污染元素受机动车和建筑尘影响较大,与机动车尾气相比,机动车磨损造成的污染也不容小视;燃煤影响一直存在,但供暖期污染有所改善.机动车尾气、建筑尘及土壤尘对离子均有贡献,在夏季土壤尘、建筑尘、二次反应的综合影响较大,春季土壤尘影响更为突出.碳在夏秋季节受汽车尾气和建筑尘的影响较大,夏季二次反应影响不大;冬季除气象因素外,燃煤和生物质燃烧也不可忽视;春季土壤尘影响较为突出.      

多相流中细长颗粒数值模拟研究综述

纤维干燥尾气中的飞灰含有大量的木质纤维、砂光粉和其他粉尘。从形状来看,木质纤维属细长颗粒,和研究较为成熟的球形颗粒在许多方面存在较多差异。目前,国内外学者们已对细长颗粒在多相流中的悬浮、沉降及流化方面开展了大量数值模拟研究,取得了一定的进展;在此基础上,继续完善木质纤维的运动特征、推导出其在换热器表面的碰撞沉积模型是下一步的主要工作。