Remove cooking fume using catalytic combustion over Pt/La-Al2O3

Five monolithic catalysts with low noble metal content were prepared by irnmerge method （Pt/γ=Al2O3, Pt/La-Al2O3, Pt/YSZ-AI203, Pt＋Pd/La-Al2O3 and Pd/La-Al2O3） and their activity measurements were carried out in a conventional fixed-bed flow reactor. The results show that La-Al2O3 can promote activity of the prepared catalysts and can decrease the complete conversion temperature of cooking fume. The Pt/La-Al2O3 catalyst has the highest activity and can be applied in wide range of gas hourly space velocity （GHSV）. Some characterizations （XRD, TPR） were carried out with the objective to explain differences in catalytic behaviors. The prepared catalyst showed a great potential for application.     

磁性离子印迹聚合物的制备及其对水中Pb(Ⅱ)的吸附

以铅离子为模板离子、乙二醇二甲基丙烯酸酯和偶氮二异丁腈为交联剂和引发剂、稀盐酸为洗脱剂,采用微波辅助反相乳液悬浮聚合法,制备了磁性离子印迹聚合物(MIIP),通过SEM、FTIR、XRD和BET技术对其进行了表征,并将其用于水中Pb(Ⅱ)的吸附.在初始质量浓度60 mg/L、溶液pH 6、吸附温度303 K、吸附时间6...     

改性钒基整体式催化剂的制备及其对燃煤烟气中甲苯与一氧化氮的同步去除性能

采用工业上简易可行的单组分浸渍法和多组分浸渍法制备了一系列Cu/Fe/Mo改性的钒钛基整体式催化剂,考察了不同整体式催化剂制备工艺及浸渍液浓度对催化剂在模拟燃煤烟气中对甲苯和NO同步去除的性能,并优选出适应燃煤烟气的改性催化剂制备工艺及配方.结果表明,使用单组分浸渍法制备的浸渍液浓度为0.5%的Fe改性钒钛基整体式催化剂具有最优的活性和选择性,在350℃下对甲苯和NO的转化率分别达到99%和94.9%,对CO_x和N₂的选择性分别为88%和96.4%,XRD和SEM-EDS-Mapping结果表明,改性组分（Cu/Fe/Mo）均匀分散在钒基整体式催化剂表面,Fe改性材料具有最大的比表面积和孔容,因而可提高甲苯和NO的同步脱除性能.     

甲醇燃料汽车排气净化

在燃用纯甲醇(M100)的BJ492Q型四冲程发动机的台架试验中,用堇青石蜂窝金属钯催化剂进行了排气净化试验。在发动机的混合比调整和负荷特性试验条件下观察了排气中甲醇、甲醛和一氧化碳的净化效果,观察了发动机的怠速起动和暖机过程中催化剂的净化性能。结果表明,发动机排气经催化净化后,排气中甲醇、甲醛和一氧化碳的浓度分别降低到3—17ppm,1—13ppm和0.01—0.30%;净化率分别达到93—99%,92—98%和80—99%。在发动机怠速起动和暖机过程中催化剂可点燃发挥净化作用。制作了催化箱,在武汉213型越野客货车上初步考察了其实用性能。     

Stability of titania nanoparticles in soil suspensions and transport in saturated homogeneous soil columns

The stability of TiO₂ nanoparticles in soil suspensions and their transport behavior through saturated homogeneous soil columns were studied. The results showed that TiO₂ could remain suspended in soil suspensions even after settling for 10 days. The suspended TiO₂ contents in soil suspensions after 24 h were positively correlated with the dissolved organic carbon and clay content of the soils, but were negatively correlated with ionic strength, pH and zeta potential. In soils containing soil particles of relatively large diameters and lower solution ionic strengths, a significant portion of the TiO₂ (18.8-83.0%) readily passed through the soils columns, while TiO₂ was significantly retained by soils with higher clay contents and salinity. TiO₂ aggregate sizes in the column outflow significantly increased after passing through the soil columns. The estimated transport distances of TiO₂ in some soils ranged from 41.3 to 370 cm, indicating potential environmental risk of TiO₂ nanoparticles to deep soil layers.     

Impact of repeated pesticide applications on the binding and release of methyl 14C-monocrotophos and U-ring labelled 14C-carbaryl to soil matrices under field conditions

The dissipation of (O-methyl-¹⁴C) monocrotophos and U-ring labelled ¹⁴C-carbaryl was monitored for over two years in absence and presence of other insecticides using in situ soil columns. The dissipation of ¹⁴C-monocrotophos from soil treated with methomyl and carbaryl showed a faster rate of downward movement than in a control column tagged with the labelled insecticide alone. The same trend was observed in experiments with ¹⁴C-carbaryl that dissipated more readily in soil treated with non-labelled monocrotophos and methomyl. In the presence of other insecticides the percentage of bound residues was generally lower than in control experiments. The bound residues at the top of the column are released at a low rate under conditions prevailing in the field. The overall time required for dissipation of 50% of monocrotophos and carbaryl (t₅₀) as estimated from control experiment was approximately 20 and 24 weeks, respectively. The data indicate that repeated applications of pesticides might enhance the release of ¹⁴C-bound residues.     

双酚A分子印迹聚合物的制备及其在水相中的吸附性能

以双酚A (BPA)为模板分子,α-甲基丙烯酸为功能单体,二乙烯基苯为交联剂,偶氮二异丁腈为引发剂,甲苯为溶剂,沉淀聚合法制备了BPA的分子印迹聚合物(MIPs).聚合物在BPA超纯水溶液中的吸附实验结果表明,MIPs对BPA的吸附量和吸附速率大于非印迹聚合物.通过Scatchard分析,MIPs对BPA的最大表观吸附...     

钢筋混凝土异形柱框架-短肢剪力墙结构振动台试验研究

异形柱框架-短肢剪力墙结构是介于异形柱框架和异形柱框架-剪力墙结构之间的一种新型结构体系。本文通过对一幢12层钢筋混凝土异形柱框架-短肢剪力墙结构1/7比例模型的地震模拟振动台试验,系统研究了该结构体系的动力特性、地震反应及破坏机理等。试验结果表明,该结构体系属于梁铰破坏机制,能满足延性设计要求,且具有良好的抗震性能和较强的抗震能力,达到了抗震设防标准。因此,该结构体系较适用于小高层住宅结构设计。     

泡沫活性炭的制备及其对丙酮的吸附性能研究

以中间相沥青和原煤为原料,在高温高压下发泡成型,经过高温炭化和水蒸气活化后制得了比表面积为672m2/g、中孔发达的泡沫状成型活性炭(MACFoam).该成型活性炭中含有大量的微米级孔道并具有良好的透气性,可以作为气流通道.由其所装填的吸附床层对丙酮的吸附行为与颗粒活性炭相似,可以使用Yoon-Nelson方程对实验穿...     

蜂蜜中氯霉素残留的检测及净化方法研究

建立了反相高效液相色谱-离子阱质谱法检测蜂蜜中氯霉素残留的方法.前处理采用改良的QuEChERS方法进行快速提取和净化.采用初级次级胺进行固相分散净化,可有效吸附蜂蜜中的糖类及有机色素等杂质.提取物在流动相甲醇:水(0.2%乙酸胺)=45:55(体积比)中,用整体色谱柱进行快速分离和质谱检测.并对MS检测中2种离子化方式(电喷雾ESI及大气压化学APCI)、各种离子化方式下正负离子模式及离子检测方法(总离子检测TIC和选择性离子监测MRM)进行了综合比较,最终确定采用电喷雾电离法(ESI)负离子模式、多反应离子监测(MRM)对氯霉素进行定性定量分析.在0.2～200μg/kgg添加浓度下,添加回收率水平在78%～93%间,变异系数在3.9%以下.该方法的检出限为0.1μg/kg,在0.1～100 μg/L浓度范围内,线性方程为y=58.753x 34867,相关系数R2=0.999 5.