钢筋混凝土结构抗火研究进展与趋势

火灾高温对钢筋混凝土结构材性有显著影响，极易造成结构损伤、破坏甚至倒塌。在大量阅读国内外文献的基础上，从建筑火灾发展过程研究、钢筋混凝土结构在火灾中的行为研究、钢筋混凝土结构抗火设计方法的研究、火灾后钢筋混凝土结构的损伤评估和加固方法的研究等4个方面对钢筋混凝土结构抗火研究进行了论述；总结了目前国内外钢筋混凝土结构抗火研究的主要进展及成果；指出了结构抗火研究尚存在的一些问题；最后，对结构抗火研究趋势进行了展望。     

Evidence of hydrocarbon contamination from the Burgan oil field, Kuwait: interpretations from thermal remote sensing data

The paper presents the application of thermal remote sensing for mapping hydrocarbon polluted sites. This has been achieved by mono-window algorithm for land surface temperature (LST) measurements, using multi-date band 6 data of Landsat Thematic Mapper (TM). The emissivity, transmittance and mean atmospheric temperature were used as critical factors to estimate LST. The changes in the surface emissivity due to oil pollution alter the apparent temperature, which was used as a recognition element to map out oil polluted surfaces. The LST contrast was successfully used to map spatial distribution of hydrocarbon pollution in the Burgan Oil field area of Kuwait. The methodology can be positively used to detect waste dumping, oil spills in oceans and ports, besides environmental management of oil pollution at or near the land surface.     

混凝土结构使役环境中温度智能模拟LabVIEW软件设计

本项目结合湖北省科技计划自然科学基金项目“混凝土结构使役环境的智能模拟”，在WTST-150试验机硬件平台基础上，以LabVIEW8．5为开发平台，设计了一套混凝土结构使役环境中温度智能模拟LabVIEW软件，主要包括能初始化程序、温度采集与显示子程序、温度PID控制子程序、温度存储和查询子程序。经投入实验验证，该软件能实现实时曲线显示、温度控制、试验状态和保存试验数据、数据查询、手动加热、分配温度通道、PID控制参数整定、制冷、读入温度曲线等功能。具有实时在线循环检测、采集数据、响应快速等优点，并具有良好的故障诊断能力和可维护性以及超强的纠错能力。本软件完善了WTST-150试验机的温度控制系统，使其更加符合实际工况。     

热解吸对污染土壤中不同形态汞的去除作用

选取贵州省万山矿区的汞污染土壤样品进行不同形态汞的热解吸去除行为研究。研究了热解吸过程中∑Hg的去除效果及动力学,以及温度和时间对污染土壤中不同形态汞的去除作用。结果表明,热解吸修复技术可有效去除土壤中的汞,土壤中∑Hg的热解吸过程符合二级动力学方程。固定热解吸时间在10 min时,随着热解吸温度的升高,土壤中水溶态汞、盐酸溶态汞和碱溶态汞含量呈现先下降后上升再下降的趋势,王水溶汞和盐酸溶态汞始终呈现下降趋势,说明不同形态的汞之间发生了转化。热解吸温度为250℃时,随着热解吸时间的增加,环境风险大的水溶态汞、盐酸溶态汞、碱溶态汞和硝酸溶态汞的去除率大幅增加,土壤的有机质损失较少,说明在低温下,延长热解吸时间,对生物毒性强的形态汞有良好的修复效果,且此温度下处理后的土壤更容易恢复农田耕作。     

Recent trends in rock dust modifications for improved dispersion and coal dust explosion mitigation

Underground coal mine explosions is perhaps the most hazardous danger in the coal mining industries. Efforts have been made to abate the coal dust explosion by applying rock dust either dry or wet. Dry dust has the best lift characteristic which efficiently quenches the flame propagation of a potential explosion. As a trade-off, undesired respirable dust particles are thereby generated imposing a severe health hazard on coal miners. Wet dusting is an alternative to dry dusting which significantly reduces the exposure to respirable dust particles. However, wet dust is subject to adverse caking issues which lead to a drastic reduction in the dispersibility of the particles. The present work summarizes the studies conducted to date regarding the surface modification of rock dust particles for the purpose of eliminating or alleviating the problems accompanying coal mine dusting applications, meanwhile improving the dispersive properties of dust particles and the ability to suppress the coal dust explosion.     

紫外分光光度法测定水和废水中硫化物

对紫外分光光度法测定水和废话中硫化物的方法进行了研究，试验了稳定时间、干扰物质、碱溶液浓度对测定的影响，提出了最佳测定条件。该方法检测限为０．０４ｍｇ／Ｌ，相对标准偏为１．４％，加标回收率在９１．６％～１０１．９％之间。     

Evolution rates and PCB content of surface films that develop on impervious urban surfaces

Surface films on impervious surfaces mediate the fate of organic contaminants in urban areas. Using sheltered 3-mm diameter glass beads as a surrogate impervious urban surface, studies in downtown Toronto showed that surface films developed at a consistent rate of 1.6–2.6 nm day⁻¹. Linear film growth was observed up to and including the last day of three studies of 89-, 273-, and 84-day duration. Total PCB content (sum of 15 PCB congeners) also increased linearly, at a similar rate as the surface film. A complementary study using unsheltered beads showed that up to 80% of film mass and PCB content were removed by film wash-off during rain events. The film growth rate on beads exposed at a rural site, 200 km northeast of Toronto, was 12–20 times lower with PCB burdens that were 7–22 times lower compared to Toronto. Based on these findings, it is estimated that approximately 56–226 g of PCBs are captured by a 70 nm thick film covering just the horizontal surface area of Toronto. This is a substantial quantity of PCB that is available for rapid surface–air exchange and wash-off.     

温度对复合厌氧折流板膜生物反应器处理生活污水效能的影响简

将新型CAMBR反应器（厌氧折流板反应器（ABR）与膜生物反应器（MBR）优化组合）用于处理生活污水，研究温度对该反应器处理效能的影响。实验水力停留时间7.5 h，混合液回流比设置为200%，pH值为6.5~8.5，溶解氧3 mg/L左右。控制3个温度梯度：高温（32~37℃），中温（20~25℃），低温（5~10℃），每个温度运行35 d。结果表明，在高温条件下，系统出水COD、NH₄⁺-N、TN和TP平均浓度分别为25、0.5、12.5和0.7 mg/L。在中温条件下，系统出水COD、NH₄⁺-N、TN和TP浓度分别30、1.2、12.5和0.4 mg/L。在低温条件下，COD和TP分别经过15 d和20 d调整适应，出水可恢复至35 mg/L和1 mg/L。由于低温（10℃以下）对硝化细菌产生强烈抑制，出水NH₄⁺-N去除率最终稳定在35%，TN去除率为40%。低温条件下，该反应器应用于污水处理中需注意适当保温，以保证出水水质。     

MnO_2对海底沉积物ANAMMOX菌的富集培养影响

采用上流式固定床反应器,在常温下连续运行,考察MnO2对海洋性ANAMMOX菌富集培养的影响,其中接种的海洋海底沉积物采自大连市附近海域。结果表明,在反应器运行近150 d中,加入MnO2的R1反应器的最大总氮去除速率为137.82 g N/(m3·d),比没有加入MnO2的R2反应器高出近20 g N/(m3·d)。在低温环境(10~15℃)运行时,R1反应器的氨氮和亚硝氮去除率比R2反应器均高出10%,且R1反应器对温度变化的适应性和运行稳定性都好于R2反应器。这表明MnO2的加入确实在一定程度上促进了海洋性ANAMMOX细菌的富集,并增强了ANAMMOX反应器对温度变化的适应性,使其能够在较宽的温度范围下运行。     

化学混凝-两级BAF工艺处理低温城市污水中试研究

以大庆东城污水处理厂进水为实验原水，采用化学混凝-两级曝气生物滤池(BAF)组合工艺进行现场中试研究(12 m3/d)，重点考察了在化学混凝的强化作用下，曝气生物滤池工艺对低温城市污水中有机物、氮和磷等污染物的净化效能。实验结果表明，单独采用两级曝气生物滤池工艺，当原水COD、NH3-N、TN和TP的平均浓度分别为45...