THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

REGIONAL DETECTION OF CHANGE IN WATER QUALITY VARIABLES1

ABSTRACT: The detection of change in a hydrologic varaible, particularly water quality, is a current problem. A method is presented for testing whether there has been a shift in the mean of a hydrologic variable based on the well established bivariate normal distribution theory. In this technique, the dependent, or target, and the independent, or control, variables are formed as weighted linear combinations of the mean values at a number of locations in a selected target and control area. The weighting factors are determined based on a mathematical programming technique which minimizes the conditional coefficient of variation thereby minimizing the number of observations required to detect a change of a preselected magnitude in the mean of the target area. The result is a situation where a savings in the number of observations required to detect a change is a consequence of adding more stations: the space-time tradeoff. Two applications of the technique are presented, the first using electrical conductivity (EC) data from two sets of river basins and the second using EC data from a set of basins as the target variable and annual discharge as the control. The results indicate that a significant savings in time can be achieved by using this method.     

Rehabilitation of a lowland river: Reconciling flood defence with habitat diversity and geomorphological sustainability

Geomorphologically appropriate rehabilitation measures were proposed to enhance the in-stream environment of the lowland River Idle, north Nottinghamshire, UK. However, the River Idle has multi-functional management requirements including those of flood defence so environmental enhancement must be pursued without significantly increasing the flood risk. Hydraulic testing of rehabilitation proposals is complicated because of the stringent assumptions about flow and morphology in ‘traditional’ hydraulic models. While new generation two- and three-dimension hydraulic models may overcome some of these problems, they are extremely data intensive, require advanced modelling capabilities and are, therefore, very expensive to apply. Also, they do not yet predict morphology-flow interactions adequately. As an alternative, several simple hydraulic models were applied to test the rehabilitation proposals, based on a fitness-for-purpose criterion.BENDFLOW was applied to fine tune the optimal siting of measures and to estimate the additional near-bank scour generated by proposed bend re-profiling. HMODEL2 and the FCFA method were used to test the impact on local channel conveyance capacities and HECRAS was applied to simulate the impact of the proposals on regional flood defence. Indicative results from the testing suggested a maximum increase in near-bank scour of 0·15 m in re-profiled bends, a loss of approximately 10% in flood conveyance locally due to deflector installation or reed and tree planting, and a 0·12 m increase in flood stage within the reach for a 15 year flood. The modelling results were acceptable to the management authority as an indication of an acceptable compromise between flood defence and conservation interests, and construction of the measures followed in 1996. It is clearly that it will require the results of post-project monitoring to indicate whether compromises made to the rehabilitation initiatives in order to satisfy flood defence requirements have unduly reduced their environmental enhancement potential but, for assessing the proposed methods, the models are recommended for use other lowland river environments.     

超高速瞬态测试系统软硬件构架设计研究

目的研究采样频率为2~10 MHz的64通道超高速同步瞬态测试系统的设计技术,实现两类典型超高速瞬态测试系统的硬件架构设计与软件架构设计。方法一类采用PXI-Express高带宽总线和高速RAID磁盘阵列架构构建持续流盘存储的连续高速测试系统,另一类是采用大容量板载数据缓存和PXI总线事后下载传输数据的架构构造高速测试系统。在高性能测试软件设计方面,主要应用生产者/消费者结构与有限状态机相结合的软件架构进行高性能测试系统软件设计。结果目前64通道下基于持续流盘架构的测试系统受数据记录的速度限制系统最高采样频率仅达2.5 MHz,而基于板载缓存数据与PXI总线事后下载数据架构的测试系统最高采样频率可达10 MHz,测试时长可达5 s。结论当前两类架构的测试系统均可满足超高速瞬态测试需求,设计时需根据需求的最高采样频率决定使用的架构形式。     

关于建立港口群环境管理机构的论证研究

港口群是区域经济发展的重要载体,其环境管理是港口群区域经济可持续发展的重要部分.现阶段中国港口群建设过程中出现环境管理理念落后、环境保护积极性不高、生态功能无序等现象,导致区域环境恶化,生态系统紊乱.通过论证基于港口群基础上建立环境管理机构的必要性与可行性,界定机构的目标、人员组成以及职责与运作,旨在为解决港口群现有环境问题、谋求港口群的长远发展提供一定的政策建议.     

固定源细颗粒物稀释测试法现场应用存在问题及影响因素分析研究

对基于大气环境的稀释测试法在现场应用中存在的主要问题进行了归纳总结,并对若干影响细颗粒物测试结果的重要因素进行了分析,诸如停留时间、稀释比、采样时间等因素,期望能够对该法测试系统的后续改进或重新设计提供实际问题导向,同时也能够对该领域现场工作的科研人员提供非常有用的经验。     

被动加标在水生生态风险评价中的应用——以多氯联苯分配系数的测定为例

准确的水生生态风险评价需要可靠的毒性数据,而其获取要求在一定时间范围内,水体中污染物的浓度保持恒定。对疏水性有机污染物进行水体生物毒性测试时,通常采用有机溶剂加标,然而该方式可能因为污染物的挥发和降解、容器壁吸附、生物摄取等问题,水体中污染物浓度持续下降,导致污染物的浓度-效应关系难以明确。近期为了克服这些问题,被动加标用于替代溶剂加标,通过污染物在加标体系中平衡分配来维持精确和恒定的水体浓度,同时还可通过测定加标聚合物中污染物的浓度来监测水体浓度。首先介绍了被动加标方法及其材料选择,讨论了该方法在生态风险评价中的主要应用,包括分配系数的测定、体外细胞测试、体内生物积累及毒性测试,以及沉积物毒性评价等。然后,以测定代表污染物多氯联苯在聚二甲基硅氧烷与水间的分配系数为例,详细说明被动加标的操作流程。最后,讨论了被动加标方法的优缺点,并对其在水生生态风险中的应用前景进行了展望。     

Comparative abiotic or biotic degradation of carboxin by two Entisols with different surface properties or Pseudomonas aeruginosa strain: A toxicity study using the crustacean Thamnocephalus platyurus

The microcrustacean Thamnocephalus platyurus was used to detect the toxicity reduction of carboxin in abiotic degradation compared to biotic degradation. The abiotic degradation was obtained using two sterilized Entisols with different surface properties while the biotic degradation by Pseudomonas aeruginosa was obtained using the fungicide as the only C source. The results showed that the highest toxicity reduction rates for the abiotic degradation were achieved in 20 days with 49.2% for the coarser soil, 60.7% for the soil with a finer texture, whereas for the biotic degradation, 60.6%. Analysis (¹H NMR) showed that the soils transformed carboxin to produce sulfoxide and enol in different concentrations depending on the soil properties, while P. aeruginosa metabolized the fungicide to produce inorganic compounds such as ammonium and nitrite, minor degradation pathways were oxidized to sulfoxide and hydrolytic ring-opening to 2-[(2-hydroxyethyl)thio]acetoacetanilide enol. These results indicated that the degradation of carboxin occurred via abiotic catalytic processes as well as via biotic transformation leading to less toxic derivatives and such phenomena are caused by exchange/surface features of soils, rather than by the mere content of clay or organic matter fractions.