介质阻挡放电等离子体直接分解NOx的影响因素

在以 γ- Al₂O₃小球作为填充物的介质阻挡放电条件下 ,研究放电电压 ( 9～ 16k V)、交流电源频率 ( 50～ 1600 Hz)、NO入口浓度 ( 50～1800 ml/m³)、气体空速 (1000～ 6500 h^-1)、反应温度 ( 20～250℃ )、介质小球比表面积及加入 O₂等因素对 NO分解率的影响 .发现提高放电电压、放电频率及介质小球比表面积能显著增加 NO分解率 ,O₂ 的加入对 NO的等离子体分解有强抑制作用 .     

DBD降解CF2ClBr过程中自由基与电子能量

利用介质阻挡放电方法对环境污染物ＣＦ₂ＣｌＢｒ进行了等离子体降解的研究．在前人对该体系的降解产物分析及活性粒子推测的基础上,采用动态反应装置得到了等离子体的发射光谱,进一步确证了等离子体系中出现的ＣＦ₂、ＣＦＣｌ、Ｆ、Ｃｌ、Ｂｒ等主要自由基,并从中推出了等离子态气体可能发生的自由基反应．同时通过发射光谱的分析,近似得到该体系的平均电子能量约为２．４２ｅＶ     

Ni2+改性的Cu-ZSM-5催化分解NO的性能

研究 Ni²⁺改性的 Cu^- ZSM-5催化剂在无氧和有氧气氛下的 NO分解反应性能 ,考察 Ni²⁺的加入量及加入方式对 Cu-ZSM-5催化剂 NO分解活性的影响 .结果表明 ,先交换适量 Ni²⁺再交换 Cu²⁺的 Ni-Cu-ZSM-5催化剂较单组分 Cu-ZSM-5催化剂有较高的高温 (500℃～600℃) NO分解活性 .在含 5.5% O₂ 的反应气氛中 ,Ni-Cu-ZSM-5在 500℃下的 NO分解率较之 Cu-ZSM-5高出约 20% ,Ni²⁺的引入显著提高了催化剂的抗氧活性 .就 Ni²⁺对 Cu-ZSM-5催化剂的可能改性机制进行了讨论 .     

江苏省工业污染排放特征及其成因分析

采用环境库兹涅茨曲线模型模拟江苏省1991年以来经济增长和工业污染之间的动态演进关系,应用分解分析法对2001～2004年间部分污染物排放变化的成因进行了定量分析.结果表明,江苏省工业污染排放量和人均GDP之间的关系类型有U型、倒U型、U型+倒U型以及N型4种,目前大部分污染物呈增长态势.将污染物排放变化的成因分为规模效应、结构效应和广义技术效应3类,结果显示,规模效应促进污染物排放量增加,结构效应和广义技术效应的作用方向不确定,但广义技术效应对污染物控制有决定性作用,强力的环境政策和管理措施能够有效地控制污染物排放.     

Analysis and decomposition of condensed tannins in tree leaves

The decomposition of leaf litter is controlled by several factors. One factor that may play an important role is the content of condensed tannins (proanthocyanidins). Here we designed a combined method to isolate proanthocyanidins from leaf extracts, to convert them to anthocyanidins, and to quantify individual anthocyanidins exactly with a new, simple, but sensitive high-performance liquid chromatography method. We used this method to show composition of proanthocyanidins and to monitor degradation of proanthocyanidins and individual constituents in leaf litter in an aquatic environment over time. Despite the rapid decrease in the initial concentrations, a fraction of the proanthocyanidins remained detectable for several weeks.     

基于遗传算法的生命线工程网络抗震优化设计

进行网络抗震可靠性分析的目的,不仅在于定量评价生命线工程网络系统的抗震性能,更重要的是利用这种分析工具指导网络抗震性能的优化设计。以无向边权网络系统为分析对象,分别以管网造价和系统抗震可靠度作为优化目标和约束条件,建立网络系统拓扑优化模型,利用递推分解算法作为网络系统抗震可靠性分析工具,并引入系统单元的灵敏度分析,采用遗传算法求解网络系统的拓扑优化问题,从而发展了一类工程网络抗震优化设计方法。实例分析结果表明,网络系统拓扑结构与系统可靠度之间有显著的正相关关系。     

整合消费与增加值视角的中国行业碳排放变动分解研究

在研究影响我国CO 2排放因素领域,基于投入产出技术的分解模型已成为主要的分析工具,现有研究多分别基于消费视角或收益视角展开分析。为全面评估各行业收益与消费对其上游、下游行业碳排放的综合影响,整合基于收益与基于消费两个视角,运用2012年与2015年我国投入产出表,构建两层嵌套式结构分解分析模型(SDA),比较分析消费规模效应、收益规模效应、行业流入、流出增加值变动效应、增加值结构变动效应等14个影响各行业碳排放变动的关键因素,并借助对消费者原则碳排放估算公式的重构,更准确地实现从增加值视角对各行业消费者原则碳排放变动的关键影响因素分析。研究发现:①研究期内,我国在总产出增长29.14%的同时碳排放量上升1.46%,各行业碳排放强度下降是主要的减排因素,其中建筑业减排贡献最大。②增排效应方面,影响从大到小依次为消费规模、收益规模、完全投入结构与完全消费结构四项效应,且前两个规模效应的影响是后两个结构效应的2倍以上,尤其建筑业消费规模效应、煤炭采选产品业收益规模效应增排较大。③消费规模扩大导致增排的原因并非行业本身生产规模扩大,而主要在于建筑业、服务业等行业规模扩张时吸收其他行业流入的增加值量增多。④收益规模扩大导致的增排效应方面,细分来说从大到小依次为劳动者报酬、生产税净额、固定资产折旧、营业盈余四项效应,且行业差异显著,如煤炭采选产品业的劳动者报酬效应,石油、炼焦产品和核燃料加工品业的生产税净额效应以及电力、热力生产和供应业的营业盈余效应增排贡献较大,而煤炭采选产品业的营业盈余效应、批发、零售业和住宿、餐饮业的生产税净额效应则减排贡献较大。     

Thermal decomposition mechanism of 65% lysine sulfate powder and its thermal stability based on thermal analysis

Lysine is widely used in the fields of food, medicine and feed, which generally appears in the form of lysine sulfate or lysine hydrochloride dust because of the high instability of the free L-lysine. The L-lysine Sulfate is in high risk of decomposition, spontaneous ignition and even the dust explosion, because the control temperature in its production process is high up to 90 °C. Thus, the thermal behaviors and its thermal stability of 65% lysine sulfate are experimentally explored in Air and Nitrogen using the simultaneous TG-DSC measurements. Results show: (1) the decomposition of 65% lysine sulfate can be divided into three stages both in the atmospheres of air and nitrogen, and most of the weight loss occurred in the first two stages, which are related with the decarboxylation and deamination process. (2) The effects of atmosphere on the decomposition of 65% lysine sulfate mainly occur at the third stage. In this stage, the weight loss in nitrogen is only 14.2%, which is much lower than that in air (34.3%), which is related to the oxidative degradation at high temperature. Besides, the active energy is slightly increased in nitrogen compared to that in air. (3) The initial temperatures of the decomposition of the 65% lysine sulfate are 145 °C and 155 °C, for the air and nitrogen atmosphere, respectively, which are much lower than that (260 °C) of the pure lysine.     

水稻和玉米的热氧化分解特性及几种动力学方法结果的比较

利用热重分析仪在空气气氛、不同的升温速率下对带壳稻谷粉和玉米粒粉进行了热重测试,依据热重实验数据,采用多种热解动力学分析方法计算了水稻和玉米的活化能数值并进行比较,结果表明水稻和玉米的热氧化反应活化能随着转化率出现先增加后降低的趋势,并在转化率为70%左右达到了极大值。     

The inhibitory combustion reaction performance and tail gas analysis of composite ultra-fine dry powder extinguishing agent containing different additives

For lack of an extinguishing agent with high-efficiency, non-toxic and environmentally friendly, a new type of extinguishing agent was fabricated to solve such an urgent problem. In this study, the zinc borate (ZB) and ferrocene (Fe(Cp)₂) were utilized as two additives for extinguishants to suppress combustion reaction and the toxicity of the tail gas was detected. The mass fraction of ZB corresponding to the optimal inhibitory effect was determined to be 0.5–1.5%, by contrast, the optimum interval of Fe(Cp)₂ was detected as 0.5–1.0%. Similarly, with the increasing proportion of the two additives, the homologous inhibitory action was gradually weakened. From the perspective of thermogravimetric analysis (TGA), it was indicated that the ZB accelerated the pyrolysis process of the extinguishant, making its thermal decomposition process more thoroughly. Meanwhile, the differential scanning calorimetry (DSC) demonstrated that the decomposition efficiency was markedly improved when the amount of ZB was maintained at 0.5–1.5%. Besides, the tail gas tests were implemented to assess the extent of toxic and harmful properties. In terms of the carbon monoxide (CO) and carbon dioxide (CO₂) generated, once the mass fraction of ZB and Fe(Cp)₂ was less than 1.5% and 1.0% respectively, the concentration of CO and CO₂ was distinctly lower than that without additives. Moreover, the inhibitory ability on nitrogen oxides (NOx) was enhanced when the mass fraction of the two additives was kept below 1.0%. The results confirmed that a more practical extinguishant was proposed and it can provide guidance for the application and development of extinguishants.