还原蒸馏法分析硝基苯类化合物的探讨

由于还原偶氮比色法中锌渣、滤纸吸附对分析硝基苯类化合物有较大影响,文章采用还原后蒸馏的方法分析硝基苯类化合物,该法比滤纸过滤分析结果准确,精密性好,操作简单.     

超声波－蒸汽蒸馏萃取技术富集沉积物样品中的氯代农药和多氯联苯

为方便快速分离沉积物中含氯农药和多氯联苯，将超声波技术和蒸汽蒸馏萃取技术相结合，萃取沉积物中的微量含氯农药和多氯联苯，所得萃取物不需进一步的净化和浓缩，可直接用于色谱分析．实验表明，在进行蒸汽蒸馏萃取之前，使用辅助的超声波技术可将大部分待测物的回收率提高２０％－３０％，较好地解决了由于沉积物的吸附作用而导致的蒸汽蒸馏萃取回收率偏低的缺陷．该法使沉积物样品中的氯代农药和多氯联苯的蒸汽蒸馏萃取富集成为可能．     

尿氚的分析测量和氚人体半排期的实验研究

用液体闪烁计数法测定了本所老点核退役过程中直接和间接接触氚工作人员的尿样几十个 ,氚浓度在 1 0 2 ～ 1 0 5 Bq/L ,最大氚浓度为 2 7× 1 0 5 Bq/L ,折合剂量当量约为 0 1 9mSv。短期观测 2 3名人体氚半排期 ,其范围为 5 5～ 1 4 8d ,中期观测 5名人体氚半排期 ,其范围为 7 6～ 9 4d。 2 8名人员半排期不仅与理论值 1 0d接近 ,而且与国内外的观测值十分符合。     

炼油装置运行周期评估技术及应用

炼油装置运行周期评估技术通过统计、分析装置故障数据,计算特定时间段装置的可靠性,进而获得装置可靠性随时间的变化规律和装置可靠性最差设备排序。介绍了该技术在某常减压装置的应用,应用结果表明,该评估技术为科学确定炼油装置运行周期提供了决策依据。     

尿中氚水和总氚的分析测定

用蒸馏-液闪法和氧化蒸馏-液闪法分别测量了氚污染人员尿中的氚水浓度和总氚(氚水和有机氚)浓度。根据72个高于本底水平的尿中氚水和总氚浓度分析比较，认为在氚内污染工作人员的尿中，有机氚与氚水的浓度比值为(5.4 3.7)％。     

Steady-state analyses for reactive distillation control: An MTBE case study

An approach, based purely on steady-state analyses, for synthesizing effective control structures for reactive distillation (RD) columns is presented. The main idea is to analyze the steady-state relationships between the manipulated (input) variables and the potential controlled (output) variables to identify input–output (IO) pairings that are sensitive and avoid steady-state multiplicities providing a large range of nearly linear operating region around the base case design. Traditional SISO control loops are then implemented using these IO pairings to obtain control structures that maintain the column near the design product purity and conversion for the anticipated primary disturbances. The Niederlinski Index is used to eliminate dynamically unstable pairings in control structures with multiple loops. The approach is demonstrated on an example MTBE RD column. The impact of steady-state multiplicities on control structure design is highlighted.     

尿中氚水和总氚的对比分析测定研究

用蒸馏液闪法测量尿中氚水浓度 ,用氧化蒸馏液闪法测量尿中总氚 (氚水和有机氚 )浓度。同时测量了 1999年核设施退役时接触氚人员的高于本底水平的尿中氚水和总氚浓度 72个样品。比较氚水和有机氚浓度 ,得到有机氚浓度占氚水浓度的平均值为 (5 4± 3 7) % ,其值与理论值和动物实验值基本相符     

DESIGN OF DESALTING PLANTS FOR CONJUNCTIVE OPERATION1

ABSTRACT The selection of an evaporator design must reflect the balancing of captial cost (primarily in heat exchanger surface and vessels) against operating cost (primarily steam cost) to achieve minimum cost. In a conjunctive plant the tendency is to select a low-capital cost, high-operating cost plant. In addition, it is advantageous to use a high-capacity plant which needs to be operated much less of the time than a plant which is sized just at the needed rate. For example, in the study of a possible system to satisfy a future increase of 450 MGD in water supply to New York Qty, a plant of 750 MGD capacity was selected as optimum. This plant, of the advanced VTE-MSF process type, would have a performance ratio of 9 lb product/1000 Btu as compared to 10-13 normally used for base-loaded plants. Steam would be supplied by a multi-unit dual-purpose nuclear power plant. The most economical type of energy supply would be “interruptible”; the steam would be used by a low pressure turbine to generate electricity during periods of peak electrical demand but would be available to the desalting plant at other times. The low pressure turbine would be available as spinning reserve during desalting plant operation. It is estimated that the desalting plant would have a load factor of 27 per cent over its life.     

分馏塔腐蚀原因分析及预防措施

针对目前炼厂原油性质越来越差,同时装置的生产周期越来越长的状况,结合生产实际对分馏塔顶部腐蚀漏液现象及原因进行了详细对比分析。提出选用合适的耐腐蚀材料、注缓蚀剂等措施,提高了设备的抗腐蚀能力,缓解了分馏塔顶部的腐蚀现象。     

Performance and fouling mechanism of direct contact membrane distillation (DCMD) treating fermentation wastewater with high organic concentrations

In this study,direct contact membrane distillation(DCMD)was used for treating fermentation wastewater with high organic concentrations.DCMD performance characteristics including permeate flux,permeate water quality as well as membrane fouling were investigated systematically.Experimental results showed that,after 12 hr DCMD,the feed wastewater was concentrated by about a factor of 3.7 on a volumetric basis,with the permeate flux decreasing from the initial 8.7 L/m~2/hr to the final 4.3 L/m~2/hr due to membrane fouling;the protein concentration in the feed wastewater was increased by about 3.5 times and achieved a value of 6178 mg/L,which is suitable for reutilization.Although COD and TOC in permeate water increased continuously due to the transfer of volatile components from wastewater,organic rejection of over 95%was achieved in wastewater.GC–MS results suggested that the fermentation wastewater contained 128kinds of organics,in which 14 organics dominated.After 12 hr DCMD,not only volatile organics including trimethyl pyrazine,2-acetyl pyrrole,phenethyl alcohol and phenylacetic acid,but also non-volatile dibutyl phthalate was detected in permeate water due to membrane wetting.FT-IR and SEM–EDS results indicated that the deposits formed on the membrane inner surface mainly consisted of Ca,Mg,and amine,carboxylic acid and aromatic groups.The fouled membrane could be recovered,as most of the deposits could be removed using a HCl/Na OH chemical cleaning method.