在用机动车尾气排放检测简易瞬态工况法监管策略

针对简易瞬态工况法机动车尾气排放检测过程中层出不穷的违规检测现象,为对其检测过程实施有效监管,通过分析简易瞬态工况法的检测原理,筛选出可用于监管的车辆基准质量、(CO+CO2)浓度、O2浓度、实时检测尾气流量4个参数,分析其用于监管的原理和理由,并通过五气分析仪漏气实验和实测尾气流量异常案例验证其监管可行性,以期为监管...     

An overview of experimental results and dispersion modelling of nanoparticles in the wake of moving vehicles

Understanding the transformation of nanoparticles emitted from vehicles is essential for developing appropriate methods for treating fine scale particle dynamics in dispersion models. This article provides an overview of significant research work relevant to modelling the dispersion of pollutants, especially nanoparticles, in the wake of vehicles. Literature on vehicle wakes and nanoparticle dispersion is reviewed, taking into account field measurements, wind tunnel experiments and mathematical approaches.Field measurements and modelling studies highlighted the very short time scales associated with nanoparticle transformations in the first stages after the emission. These transformations strongly interact with the flow and turbulence fields immediately behind the vehicle, hence the need of characterising in detail the mixing processes in the vehicle wake. Very few studies have analysed this interaction and more research is needed to build a basis for model development. A possible approach is proposed and areas of further investigation identified.     

Emission and Performance Characteristics of a 2 Litre Toyota Diesel Van Operating on Esterified Waste Cooking Oil and Mineral Diesel Fuel

Exhaust emission and performance characteristics were evaluated in a Toyota van, powered by a 21 indirect injection (IDI) naturally aspirated diesel engine, operating on vegetable based waste cooking oil methyl ester (WCOME).Tests were performed on a chassis dynamometer and the data were compared with previous results conducted on the same vehicle using mineral diesel fuel. The data obtained includes smoke opacity, carbon monoxide (CO), carbon dioxide (CO₂), oxygen (O₂), nitrogen dioxide (NO₂), nitric oxide (NO), sulfur dioxide (SO₂) and brake power. Engine lubricating oil samples were also taken. Results from this study indicated a difference of approximately 9% in brake power between the two fuels. WCOME developed a significant lower smoke opacity level and reduced CO, CO₂, SO₂ emissions. However, O₂, NO₂ and NO levels were higher with the vegetable oil based fuel. Power values were comparable for both fuels. Lubricating oil analysis gave little change of viscosity and wear metal concentrations after 2887km were: Silicon 35ppm, Chromium 3.3ppm, Iron 33.8ppm, Copper 14.1ppm and lead 78.6ppm.     

基于HR/CFD技术的城市汽车尾气扩散规律研究

为研究城市空间结构对汽车尾气扩散规律,根据高分辨率遥感影像建立了某城市核心区域几何模型。以当地常年气象风向作为重要的边界条件之一,应用CFD多相流技术,模拟了十字交叉口车辆队列怠速等候35,45,55 s时的尾气扩散过程,并对45 s时4个监测点的体积分数进行了实测,最后,通过建筑高度优化,降低了该区域的尾气含量。以上研究结果表明:在空间狭小区域,近地空间CO体积分数达1.0×10-7,与研究域平均体积分数相差100倍以上,说明城市空间结构对尾气扩散影响较大,仿真所揭示的规律与实测吻合。建筑设计时应结合当地气象风向和风速,应设计一定的建筑高度梯度,可以促使污浊气体迅速扩散至远地空间。     

化工废气排放量灰色预测的GPSM（1）模型

在对ＧＩＭ（１）模型研究的基础上，提出了一种化工废气排放的单变量灰色幂级数曲线预测新模型「简称（ＧＰＳＭ（１）」，并建立了辨识模型参数的优化方法。结果表明，ＧＰＳＭ（１）在有线性输出的平稳系统中，比ＧＭ（１，１）更能反映原始资料提供的信息，系统分辨率高，同态性好，预测精度理想，为环境系统的拟合、预测分析和决策开辟了新途径，从而拓宽了ＧＭ（１，１）模型在环境科学领域中的应用范围。     

PAHs pollution from traffic sources in air of Hangzhou, China: Trend and influencing factors

Introduction China is experiencing rapid economic and populationgrowth. The rapid growth and increasing fossil fuel energyconsumption have resulted in large amounts of pollutants suchas TSP, SO2, NOx and hydrocarbons to be emitted intoambient atmosphere. Nowadays, national routine monitor haspaid much attention to TSP, SO2 and NOx. Highconcentrations of SO2 and NOx can lead to an increase ofregional levels of acid deposition and tropospheric ozon, thu…     

城市机动车尾气污染控制的综合对策体系研究

在综述城市机动车尾气污染的已有对策基础上，阐述了包括规划层次、管理层次、工程层次和车辆层次在内的综合对策体系，并就国内不同阶段所侧重的对策层次进行了探讨。     

汽车尾气净化催化剂研究进展

介绍了汽车尾气净化催化剂的发展过程、三效催化剂的净化原理以及催化剂的组成等.     

湿式除尘系统引风机“带水”问题分析

通过对2套湿式除尘脱硫系统的实际改造效果的对比，分析系统中引风机“带水”的原因，找出相应的对策。     

Combustion performance and emission characteristics on HCCI engine of waste plastic pyrolysis oil biodiesel blends with external PFI and vaporiser

ABSTRACT

Analysis of plastic oil obtained from waste plastic through pyrolysis process, as an alternative to biodiesel is presented in this paper. The HCCI engine is considered for experimental validation of combustion performance and emission characteristics. To accumulate pyrolysis oil as fuel, the design modifications were made in external mixture formation on the existing computerised 4-stroke, single cylinder, water cooled, direct injection kirloskar diesel engine connected with eddy current dynamometer to satisfy HCCI conditions. HCCI engine can be worked on wide assortment of fuels beginning from diesel to different blends (WPPO 5%,10%,15% and 20% by volume) of biodiesel .The designed additional device connected to the engine is utilised for fuel vaporisation and mixture arrangement. In the experimental study, the combustion results were initiate to be of 39.69 % higher Rate of Heat Release (RoHR) for biodiesel HCCI as compared with diesel HCCI. Higher brake thermal efficiency (BTE) was found 37 % without exhaust gas recirculation (EGR) at WPPO 20 % biodiesel blend. And also found 50 % and 65 % reduction in NOx emission and 18 % and 28 % reduction in smoke opacity are obtained for biodiesel vapour induction without EGR and biodiesel vapour induction with 15 % EGR as compared with diesel fuel. The CO (0.34 %), and UHC (2.15 %) emissions are increases with 15 % EGR, but the emissions are within the standard limits specified by the emissions standards.