环评中锅炉房大气污染源强的确定

在环境评价中,污染源强的确定对环境影响因素评价的分析结果有重要作用。对锅炉房污染物排放的分析表明,影响锅炉房大气污染物的主要因素有燃料的构成、发热量和燃烧方式等。确定锅炉房大气污染物的方法主要有物料衡算法、实测法和经验系数法。在这三种方法中,物料衡算法被普遍采用。在确定锅炉房大气污染物的排放量时,也可以采用物料衡算法和实测法相结合的方法。     

锅炉烟尘排放浓度超标成因分析及控制对策

分析了锅炉燃烧排出的危害人类健康的污染物烟尘及ＳＯ２超标的成因,以及长庆油田燃煤锅炉烟道气的监测结果。提出了控制锅炉烟尘排放浓度的对策及消烟措施。例如：推行煤炭洗选,改进燃料结构,限制烟尘超标的锅炉产品制造、安装,改进燃烧方式,强化炉内燃烧,改造除尘器。     

间歇式加煤锅炉的烟尘测试技术探讨

针对间歇式加煤锅炉在烟尘实际测试中,最终测试结果容易出现误差的问题,通过试验,分析造成误差的主要原因和规律,提出了消除和减小误差的相应对策     

我国脱硫脱硝行业2013年发展综述

综述了2013年我国脱硫脱硝行业的发展环境及发展概况;重点介绍了火电行业、钢铁行业、水泥行业脱硫脱硝产业发展现状;分析了行业市场特点及重要动态;针对行业发展中存在的主要问题提出了解决对策和建议.     

变压器发热试验自动测试平台的开发

研究开发了变压器认证标准GB19212．1（IEC 61558－1）中发热试验项目的自动测试平台,详细叙述了试验操作过程、自动测试平台的软硬件结构,继电器控制模块组成与硬件设计,以及虚拟仪器软件实现流程。该平台可显著减少检测人员的在线工作时间,并行测试可提高设备使用率,同时相比之前的手动测试,可明显降低人工测量部分的不确定度。     

炼化浓盐水处理与资源化工艺探讨＊

炼化污水深度处理回用是各炼化企业节水减排的主要措施之一。炼化企业反渗透(简称RO)污水脱盐回用装置在运行中暴露出末端高含盐污水的处置难题,影响了污水回用生产的连续运行。文章阐述近年来炼化企业高含盐污水处置现状、存在问题、国内外处理技术及发展趋势,在此基础上针对炼化企业特点,提出以热法、膜法为核心技术的浓盐水处理工艺耦合方案,为炼化企业解决污水回用瓶颈技术难题、实施污水"零排放"与发展循环经济提供借鉴与参考。     

Characterization of coffee residues pellets and their performance in a residential combustor

Spent coffee grounds (SCG) and coffee husks (CH) were evaluated as biofuels, after densification, for energy production. CH represent a specific problem for the coffee industry due to a low calorific value, high ash content, and a very low bulk density. Hence, the energetic potential of SCG (95 wt%)/CH (5 wt%) blend and pure SCG (100%) were examined. The blend of SCG and CH was limited to 5 wt% of CH because of the low bulk density of CH. Therefore, physicochemical and energetic characterizations of the produced pellets were performed. Thermogravimetric analyses were performed under nitrogen and air atmospheres to evaluate the CH behavior in the blend. Characterization study shows that both produced pellets could reach the French Agropellets standard (AQI). Thermal degradation showed that the mean reactivity of the SCG/HC pellets was higher than pure SCG. Then, combustion experiments were performed in a domestic combustor, after modification of the boiler power in order to improve its energetic performances. The presence of CH led to a rise of CO, NOx, VOC’s, and particle emissions. Nevertheless, the performances of the biofuels are almost in agreement the NF EN 12809 standard.     

Photovoltaic-thermal (PV/t) panel to minimize electrical and air conditioning energy consumption of a typical office in Beirut

A combined photovoltaic–thermal (PV/t) panel is proposed to produce simultaneously electricity and heat from one integrated unit. The unit utilizes effectively the solar energy through achieving higher PV electrical efficiency and using the thermal energy for heating applications. To predict the performance of the PV/t at a given environmental conditions, a transient mathematical model was developed. The model was integrated in a heating application for a typical office space in the city of Beirut to provide the office needs for electricity, heating during winter season, and dehumidification and evaporative cooling during the summer season. To minimize the yearly office energy (electrical and heat) needs, the PV/t panel cooling air flow rate and the dehumidification regeneration temperature were determined for opimal unit operation. Thermal energy savings of up to 85% in winter and 71% in summer were achived compared to conventional systems at a payback period of 8 years for the panels.     

燃煤锅炉低温烟气余热利用探讨

针对燃煤锅炉燃烧产生的低温烟气仍具有一定温度的现象,提出通过增设超导热管空气预热器对这部分低温烟气余热加以回收的设想,对锅炉送风进行预热,探讨烟气余热利用可达到的送风温度、节能效果及可能产生的经济效益。     

稠油热采注汽锅炉节能减排措施实践

提高注汽锅炉系统热率是节能降耗、降本增效的主要挖潜方向。为此开展了一系列节能技术的研究,先后开展了热管空气换热器、高温辐射涂料的节能、硬度在线检测、对流段翅片管硬垢清洗技术的推广应用,通过这些技术的实施应用,取得一定的社会效益和经济效益。