基于CALPUFF模型的漳州市大气环境容量研究

研究表明：CALPUFF模式是运用于广域的大气扩散模型,在区域范围较大的复杂地形条件下的应用具有突出的优势.利用CALPUFF大气扩散模型模拟漳州市2009年气象场和污染物浓度场,采用监测值对模拟结果进行验证表明模型的适用性;基于现状污染源,建立大气污染物传递系数矩阵,结合线性优化法测算了不同环境空气质量标准下漳州市大气环境容量.     

基于增强回归树的城市PM2.5日均值变化分析:以常州为例

利用2014年12月至2015年11月常州市区6个国控监测站空气污染物浓度逐时数据,分析了PM_(2.5)浓度季节变化特征,采用增强回归树模拟分析了PM10、4种气态污染物和7个气象因子对ρ(PM_(2.5))日变化的贡献.结果表明,常州市区PM_(2.5)污染季节差异明显,冬季污染严重且持续时间长,夏季污染较轻.四季ρ(PM_(2.5))空间分布特征存在一定差异,但各季内不同监测站差异较小.增强回归树对ρ(PM_(2.5))日均值进行模拟和验证得到,训练数据的相关性为0.981,交叉验证的相关性为0.957.此外,模拟值与实测值的标准化平均偏差为1.80%,标准化平均误差为10.41%,可见模型拟合效果较好.PM10、气态污染物、气象因子和区域输送及扩散这4种影响类型对全年ρ(PM_(2.5))日均值差异的贡献率分别为23.4%、28%、36.2%和12.6%,表明在对ρ(PM_(2.5))日均值差异的影响上,气象因子二次形成一次源区域输送及扩散.在对ρ(PM_(2.5))日均值差异贡献率大于5%的因子中,ρ(PM_(2.5))日均值与PM10、相对湿度、CO和O3正相关,与温度、SO2和混合层高度负相关,与大气压和NO2关系较复杂.区域输送及扩散方面,东南风向、偏西风向和偏北风向等上风向周边城市的污染物输送对常州市区PM_(2.5)污染存在较大的负面影响.     

基于距离相关系数和支持向量机回归的PM2.5浓度滚动统计预报方案

针对目前空气质量统计预报方法存在的主要缺陷,本文提出了距离相关系数和支持向量机回归相结合的统计预报方案DC-SVR.利用淮安市2013年1—12月PM_(2.5)观测资料和常规气象观测资料,首先在选入预报当日气象要素的基础上,增加选取前期污染物和气象要素作为预报因子,再采用距离相关系数分季节从预报因子中筛选出重要预报因子,最后采用支持向量机回归对PM_(2.5)浓度值进行逐日滚动统计预报.研究发现,淮安地区气温和气压对PM_(2.5)的距离相关性要高于其他气象要素,夏秋季PM_(2.5)与气象要素的距离相关性较春冬季好.基于距离相关系数和支持向量机回归建立DC-SVR模型,PM_(2.5)的试预报值和实测值的全年相关系数高达0.76,平均偏差仅为1.13μg·m~(-3),平均绝对误差为23.47μg·m~(-3).通过与支持向量机回归、人工神经网络的统计预报效果对比,DC-SVR模型有效降低预报因子维数且能自适应选取最佳参数,预报精度显著优于其他3种统计预报方案,可为业务化预报提供参考.     

多点激励下圆柱面巨型网格结构地震响应分析

空间相关性对大跨度空间结构的影响不容忽视。本文采用动力时程分析方法对圆柱面巨型网格结构进行了多点激励下的地震响应分析,并与一致激励下的结构地震响应进行对比,探讨了主体结构单独承载和子结构参与协同承载这2种情况下,不同行波激励对结构关键节点和杆件响应的影响及其变化特点;通过比较分析结构在多点激励和一致激励下的响应差异,得出圆柱面巨型网格结构在地震输入时需考虑多点激励的结论,可供该类结构的抗震设计参考。     

A measurement of community disaster resilience in Korea

Building a community that is resilient to disasters has become one of the main goals of disaster management. Communities that are more disaster resilient often experience less impact from the disaster and reduced recovery periods afterwards. This study develops a methodology for constructing a set of indicators measuring Community Disaster Resilience Index (CDRI) in terms of human, social, economic, environmental, and institutional factors. In this study, the degree of community resilience to natural disasters was measured for 229 local municipalities in Korea, followed by an examination of the relationship between the aggregated CDRI and disaster losses, using an ordinary least squares (OLS) regression method and a geographically weighted regression (GWR) method. Identifying the extent of community resilience to natural disasters would provide emergency managers and decision-makers with strategic directions for improving local communities' resilience to natural disasters while reducing the negative impacts of disasters.     

Trace metals distribution and their dependence on some physico-chemical parameters in creek sediment

The concentrations of the trace metals Mn, Zn, Cr, V, Co, Ni, Ba, Pb, Cu, Cd, As and Hg, their spatial distribution, and their correlation as a function of physico-chemical parameters were investigated for grab sediment samples collected from different locations across the Thane Creek, Mumbai, India. Hydride generation atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, and differential pulse anodic stripping voltammetry were adopted for chemical analyses. Various geochemical indices were evaluated. The studied metal/metalloids were compared with sediment quality guideline values. Besides, the role of different physico-chemical parameters of the sediments such as pH, CaCO₃, cation exchange capacity, total carbon, and of the relative composition in respect to very coarse, coarse and medium sand, fine sand and very fine sand, silt and clay fraction were also critically investigated. Positive one-to-one correlations between fine sand and very fine sand, silt and clay, and total carbon with sediment metal concentrations have been noticed. Multiple regression analysis reveals strong positive correlations between sediment metal concentrations and total carbon content only.     

电极移动速度效应检测仪系统的研究

分析了国际静电放电测试研究领域现有的各种测试研究装置特点，为克服已有测试装置缺陷本团队研发设计出一种全新的静电放电测试研究系统—电极移动速度效应检测仪。对其结构设计特点、功能进行了分析。我们研制的新型静电放电测试系统兼具实现真实直线运动准确调节和多环境因素可控的优点，彻底解决了困扰国际电磁兼容静电放电研究领域电极需高速向靶移动放电与避免强烈撞击损坏仪器的难题，实现了对多种因素影响逐一准确控制，为静电放电性质更为深入广泛的研究提供了新的手段和平台。     

An analysis of assessment outcomes from eight years' operation of the Australian border weed risk assessment system

The majority of Australian weeds are exotic plant species that were intentionally introduced for a variety of horticultural and agricultural purposes. A border weed risk assessment system (WRA) was implemented in 1997 in order to reduce the high economic costs and massive environmental damage associated with introducing serious weeds. We review the behaviour of this system with regard to eight years of data collected from the assessment of species proposed for importation or held within genetic resource centres in Australia. From a taxonomic perspective, species from the Chenopodiaceae and Poaceae were most likely to be rejected and those from the Arecaceae and Flacourtiaceae were most likely to be accepted. Dendrogram analysis and classification and regression tree (TREE) models were also used to analyse the data. The latter revealed that a small subset of the 35 variables assessed was highly associated with the outcome of the original assessment. The TREE model examining all of the data contained just five variables: unintentional human dispersal, congeneric weed, weed elsewhere, tolerates or benefits from mutilation, cultivation or fire, and reproduction by vegetative propagation. It gave the same outcome as the full WRA model for 71% of species. Weed elsewhere was not the first splitting variable in this model, indicating that the WRA has a capacity for capturing species that have no history of weediness. A reduced TREE model (in which human-mediated variables had been removed) contained four variables: broad climate suitability, reproduction in less or than equal to 1year, self-fertilisation, and tolerates and benefits from mutilation, cultivation or fire. It yielded the same outcome as the full WRA model for 65% of species. Data inconsistencies and the relative importance of questions are discussed, with some recommendations made for improving the use of the system.     

生化需氧量测定的方法改进

生化需氧量测定中接种液的制备和稀释倍数的确定是2个关键的步骤，本文提出一种可行的制备接种液的方法，根据实践经验，总结出一种稀释倍数计算方法，适合在实际分析中使用。     

Modelling plant species richness using functional groups

Conservation biologists increasingly rely on spatial predictive models of biodiversity to support decision-making. Therefore, highly accurate and ecologically meaningful models are required at relatively broad spatial scales. While statistical techniques have been optimized to improve model accuracy, less focus has been given to the question: How does the autecology of a single species affect model quality? We compare a direct modelling approach versus a cumulative modelling approach for predicting plant species richness, where the latter gives more weight to the ecology of functional species groups. In the direct modelling approach, species richness is predicted by a single model calibrated for all species. In the cumulative modelling approach, the species were partitioned into functional groups, with each group calibrated separately and species richness of each group was cumulated to predict total species richness. We hypothesized that model accuracy depends on the ecology of individual species and that the cumulative modelling approach would predict species richness more accurately. The predictors explained plant species richness by ca. 25%. However, depending on the functional group the deviance explained varied from 3 to 67%. While both modelling approaches performed equally well, the models of the different functional groups highly varied in their quality and their spatial richness pattern. This variability helps to improve our understanding on how plant functional groups respond to ecological gradients.