Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

基于CALPUFF模型的漳州市大气环境容量研究

研究表明：CALPUFF模式是运用于广域的大气扩散模型,在区域范围较大的复杂地形条件下的应用具有突出的优势.利用CALPUFF大气扩散模型模拟漳州市2009年气象场和污染物浓度场,采用监测值对模拟结果进行验证表明模型的适用性;基于现状污染源,建立大气污染物传递系数矩阵,结合线性优化法测算了不同环境空气质量标准下漳州市大气环境容量.     

公路项目环评中低时速单车噪声源强研究

由于缺乏低时速单车噪声源强估算模式,低等级公路项目噪声预测结果常与实际监测结果存在较大偏差。文中通过实测各车型车辆在低时速条件下时速和单车辐射声级(Lmax)数据,运用统计软件分析两者间的关系,并通过实测过往车辆数据进行验证。结果显示沿用《公路建设项目环境影响评价规范》(以下简称《06规范》)中的公式计算低车速源强可能会造成结果偏低,建议采用下列式子估算低车速单车噪声源强:小型车L=21.5 lgV+34.96(15≤V≤63),中型车L=10.4 lgV+59.29(15≤V≤53),大型车15≤V≤48(15≤V≤48)。     

齐齐哈尔市建华区餐饮业噪声污染特点及防治对策

近年来城区餐饮业发展迅速,引发了一系列的环境问题。阐述了餐饮业噪声污染现状,产生污染的原因,并就如何解决这些问题提出了意见。     

住宅遭受交通噪声污染时开发商应承担的民事责任初探

从分析住宅遭受交通噪声污染时开发商民事责任的性质入手,探讨了现行声环境质量标准对开发商的适用性和合理性,阐明了开发商的责任范围,提出了完善住宅声环境质量标准的建议。主要结论:目前我国尚缺乏合理的约束开发商的住宅声环境质量标准;开发商的隔声减噪义务主要包括留出与道路之间的防噪距离和采取安装隔声窗、封闭阳台等隔声措施;应将门窗封闭状态下的室内噪声限值颁布为住宅声环境质量标准。     

Multi-response optimization of Fenton process for applicability assessment in landfill leachate treatment

Fenton process, as a pretreatment method, was found to be effective in the primary treatment of mature/medium landfill leachate. However, the main problem of the process is the large amount of produced sludge that requires an accurate feasibility evaluation for operational applications. In this study, the response surface methodology was applied for the modeling and optimization of Fenton process in three target responses, (1) overall COD removal, (2) sludge to iron ratio (SIR) and (3) organics removal to sludge ratio (ORSR), where the latter two were new self-defined responses for prediction of sludge generation and applicability assessment of the process, respectively. The effective variables included the initial pH, [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage. According to the statistical analysis, all the proposed models were adequate (with adjusted R² of 0.9116–0.9512) and had considerable predictive capability (with prediction R² up to 0.9092 and appropriate adequate precision). It was found that all the variables had significant effects on the responses, specifically by their observed role in dominant oxidation mechanism. The optimum operational conditions obtained by overlay plot, were found to be initial pH of 5.7, [H₂O₂]/[Fe²⁺] ratio of 17.72 and [Fe²⁺] of 195 mM, which led to 69% COD removal, 2.4 (l sludge/consumed mole Fe²⁺) of SIR and 16.5 (gCOD removed/l produced sludge) for ORSR in verification test, in accordance with models-predicted values. Finally, it was observed that [H₂O₂]/[Fe²⁺] ratio and Fe²⁺ dosage had significant influence on COD removal, while Fe²⁺ dosage and [H₂O₂]/[Fe²⁺] ratio had remarkable effects on SIR and ORSR responses, respectively.     

SACRAMENTO RIVER FLOW RECONSTRUCTED TO A.D. 869 FROM TREE RINGS1

ABSTRACT: A time series of annual flow of the Sacramento River, California, is reconstructed to A.D. 869 from tree rings for a long‐term perspective on hydrologic drought. Reconstructions derived by principal components regression of flow on time‐varying subsets of tree‐ring chronologies account for 64 to 81 percent of the flow variance in the 1906 to 1977 calibration period. A Monte Carlo analysis of reconstructed n‐year running means indicates that the gaged record contains examples of drought extremes for averaging periods of perhaps = 6 to 10 years, but not for longer and shorter averaging periods. For example, the estimated probability approaches 1.0 that the flow in A.D. 1580 was lower than the lowest single‐year gaged flow. The tree‐ring record also suggests that persistently high or low flows over 50‐year periods characterize some parts of the long‐term flow history. The results should contribute to sensible water resources planning for the Sacramento Basin and to the methodology of incorporating tree‐ring data in the assessment of the probability of hydrologic drought.     

基于Petri网的铁路车站安全防护系统建模及可靠性分析

采用单一的随机Petri网对车站线路结构、列车运行过程及车站防护系统建模,基于欧洲电工标准委员会定义的安全目标,确定车站安全防护系统的可靠性需求。对无防护系统的列车入站进行建模和分析,然后基于防护系统功能及可靠性特性,结合列车入站动态特性,对防护系统的功能和可靠性进行建模,并根据安全目标与车站事故率之间的数学关系进行系统的安全分析和可用性分析。其结果表明,车站防护系统的可靠性与乘客的个人风险存在着定量的关系,从而可以依据个人风险的标准来确定防护系统可靠性需求。     

Modeling Postfire Response and Recovery using the Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS)1

Abstract: This paper investigates application of the Army Corps of Engineers’ Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS) to a burned watershed in San Bernardino County, California. We evaluate the HEC‐HMS’ ability to simulate discharge in prefire and postfire conditions in a semi arid watershed and the necessary parameterizations for modeling hydrologic response during the immediate, and subsequent recovery, period after a wildfire. The model is applied to City Creek watershed, which was 90% burned during the Old Fire of October 2003. An optimal spatial resolution for the HEC‐HMS model was chosen based on an initial sensitivity analysis of subbasin configurations and related model performance. Five prefire storms were calibrated for the selected model resolution, defining a set of parameters that reasonably simulate prefire conditions. Six postfire storms, two from each of the following rainy (winter) seasons were then selected to simulate postfire response and evaluate relative changes in parameter values and model behavior. There were clear trends in the postfire parameters [initial abstractions (I_a), curve number (CN), and lag time] that reveal significant (and expected) changes in watershed behavior. CN returns to prefire (baseline) values by the end of Year 2, while I_a approaches baseline by the end of the third rainy season. However, lag time remains significantly lower than prefire values throughout the three‐year study period. Our results indicate that recovery of soil conditions and related runoff response is not entirely evidenced by the end of the study period (three rainy seasons postfire). Understanding the evolution of the land surface and related hydrologic properties during the highly dynamic postfire period, and accounting for these changes in model parameterizations, will allow for more accurate and reliable discharge simulations in both the immediate, and subsequent, rainy seasons following fire.     

Development of a Quantitative Pasture Phosphorus Management Tool Using the SWAT Model1

Abstract: Assessment tools to evaluate phosphorus loss from agricultural lands allow conservation planners to evaluate the impact of management decisions on water quality. Available tools to predict phosphorus loss from agricultural fields are either: (1) qualitative indices with limited applicability to address offsite water quality standards, or (2) models which are prohibitively complex for application by most conservation planners. The purpose of this research was to develop a simple interface for a comprehensive hydrologic/water quality model to allow its usage by farmers and conservation planners. The Pasture Phosphorus Management (PPM) Calculator was developed to predict average annual phosphorus (P) losses from pastures under a variety of field conditions and management options. PPM Calculator is a vastly simplified interface for the Soil and Water Assessment Tool (SWAT) model that requires no knowledge of SWAT by the user. PPM Calculator was validated using 33 months of data on four pasture fields in northwestern Arkansas. This tool has been extensively applied in the Lake Eucha/Spavinaw Basin in northeastern Oklahoma and northwestern Arkansas. PPM Calculator allows conservation planners to take advantage of the predictive capacity of a comprehensive hydrologic water quality model typically reserved for use by hydrologists and engineers. This research demonstrates the applicability of existing water quality models in the development of user friendly P management tools.