高架道路周边建筑物灰尘重金属污染风险:以常州市为例

在常州环城高架道路两侧6个住宅小区不同楼层采集126个灰尘样品,测定Cu、Zn、Pb、Cd、Ni和Cr含量,分析其化学形态和垂直分布特征,采用富集系数和风险评价指数评价其污染程度和生物有效性,并进行潜在生态风险评价和健康风险评价.结果表明,灰尘中Cu、Zn、Pb、Cd、Ni和Cr含量均值分别为181.95、709.99、211.24、2.76、101.59和257.55mg·kg-1,均远大于背景值.灰尘中Cd的富集系数为33.05,富集程度为强烈,Cu、Pb和Zn的富集程度为显著富集,它们可能受到自然源、交通源和区域废气传输的综合影响,Ni和Cr富集系数较低,可能主要受自然源影响.随楼层高度的上升,Cd含量呈增加趋势,Pb和Zn含量呈先增加后降低趋势,Cu含量无显著变化.Zn、Cd、Cu和Pb主要以活性态存在,生物有效性较高,Ni和Cr以残渣态为主,生物有效性较低.改进的潜在生态风险评价结果表明,Cd的潜在生态风险极高,对多元素的潜在生态风险起主导作用,且对高层楼的潜在生态风险较大,其它重金属潜在生态风险为中低级.健康风险评价结果表明,Cr对儿童的致癌风险超过安全阈值,其它重金属对成人与儿童致癌风险及非致癌风险均在安全域之内.     

XK—1．5型除尘清洗两用机的研究、试验与应用

采用高压水和喷嘴的引射原理，使水射流通过喷嘴后高效雾化，达到降尘的目的，并主要沉降５μｍ以下对人体具有致命危害的呼吸性粉尘。当更换喷嘴后也可进行积上和物体的表面清洗。     

Utilization of cement kiln dust (CKD) in cement mortar and concrete—an overview

Solid waste management is one of the major environmental concerns around the world. Cement kiln dust (KKD), also known as by-pass dust, is a by-product of cement manufacturing. The environmental concerns related to Portland cement production, emission and disposal of CKD is becoming progressively significant. CKD is fine-grained, particulate material chiefly composed of oxidized, anhydrous, micron-sized particles collected from electrostatic precipitators during the high temperature production of clinker. Cement kiln dust so generated is partly reused in cement plant and landfilled. The beneficial uses of CKD are in highway uses, soil stabilization, use in cement mortar/concrete, CLSM, etc.Studies have shown that CKD could be used in making paste/mortar/concrete. This paper presents an overview of some of the research published on the use of CKD in cement paste/mortar/concrete. Effect of CKD on the cement paste/mortar/concrete properties like compressive strength, tensile strength properties (splitting tensile strength, flexural strength and toughness), durability (Freeze–thaw), hydration, setting time, sorptivity, electrical conductivity are presented. Use of CKD in making controlled low-strength materials (CLSM), asphalt concrete, as soil stabilizer, and leachate analysis are also discussed in this paper.     

Satellite and Ground Based Monitoring of Aerosol Plumes

Plumes of atmospheric aerosol have been studied using a rangeof satellite and ground-based techniques. The Sea-viewing WideField-of-view Sensor (SeaWiFS) has been used to observe plumesof sulphate aerosol and Saharan dust around the coast of theUnited Kingdom. Aerosol Optical Thickness (AOT) was retrievedfrom SeaWiFS for two events; a plume of Saharan dusttransported over the United Kingdom from Western Africa and aperiod of elevated sulphate experienced over the Easternregion of the UK. Patterns of AOT are discussed and related tothe synoptic and mesoscale weather conditions. Furtherobservation of the sulphate aerosol event was undertaken usingthe Advanced Very High Resolution Radiometer instrument(AVHRR). Atmospheric back trajectories and weather conditionswere studied in order to identify the meteorologicalconditions which led to this event. Co-located ground-basedmeasurements of PM₁₀ and PM_2.5 were obtained for 4sites within the UK and PM_2.5/10 ratios were calculatedin order to identify any unusually high or low ratios(indicating the dominant size fraction within the plume)during either of these events. Calculated percentiles ofPM_2.5/10 ratios during the 2 events examined show thatthese events were notable within the record, but were in noway unique or unusual in the context of a 3 yr monitoringrecord. Visibility measurements for both episodes have beenexamined and show that visibility degradation occurred duringboth the sulphate aerosol and Saharan dust episodes.     

The Characterisation of Settled Dust by Scanning Electron Microscopy and Energy Dispersive X-ray Analysis

Settled dust has been collected inside the main foyers ofthree University buildings in Wolverhampton City Centre,U.K. Two of the three buildings are located in a streetcanyon used almost exclusively by heavy duty dieselvehicles. The dust was collected on adhesive carbonspectro-tabs to be in a form suitable for analysis byscanning electron microscope and energy dispersive X-rayanalysis. Using these analytical techniques, individualparticle analysis was undertaken for morphology andchemistry. Seasonal variations and variations due tolocation were observed in both the morphologicalmeasurements and chemical analysis. Many of the differencesappear attributable to the influence of road traffic, inparticular, the heavy duty diesel vehicles, travellingalong the street canyon.     

韶钢新石灰窑烟气除尘技术的应用

韶钢新石灰窑烟气除尘系统要用旋风除尘器、金属管式换热器、高效陶瓷多管除尘器的组合方式。介绍了该系统的设计参数、工艺流程、主要设备及其功能。     

静电除尘在烧结机头烟尘治理中的应用

通过对安钢烧结机一、二期工程中烧结机头电除尘器结构性能和运行效果对比，结合安钢实际运行情况，分析了一期工程中电除尘器的运行存在的问题，重点对电除尘器的结构特点进行阐述，以提供一种适用于烧结机头烟尘治理的电除尘技术。     

清洁安全的井下作业环境

根据煤矿井下粉尘的特性及其危害和对井下空气污染的状况，提出针对井下各产尘源的治理措施和治理方法，通过对粉尘污染的治理，改善煤矿工人的作业环境，实现清洁生产，降低矿工职业病发病率和事故率，提高煤矿生产效益和经济效益。     

粉料无尘装车机工作原理及其在冶金厂矿的应用

介绍集装车与防尘统一于一体的无尘装车技术及具有设备本质安全化特点的无尘装车机在解决粉状物料装车作业时的扬尘问题,保护作业工人健康,维护厂区环境方面的重要优越性。     

管式电除尘器"伞形罩"结构特性研究

在高温、高湿窑炉烟气条件下,采用立式管式电除尘器“伞形罩”结构,能够解决其清灰不力、二次扬尘、除尘效率不稳定等问题。本研究了“伞形罩”结构的除尘机理及效率及清灰力度影响因素、抑制二次扬尘机制。研究结果表明,“伞形罩”结构除尘效率因集尘表面积的增加而提高;应用支铁框架式振打方式,振打强度明显加强;其分流机制能有效地抑制二次扬尘：从而为“伞形罩”结构的优化设计提供了依据。